CALPUFF and Postprocessors

Table F-3 (Continued)
CALPUFF Control File Inputs - Input Group 5
Output Options
Variable Type Description Default Value
IWPRT integer Control variable for printing of wet flux fields to the output
list file (CALPUFF.LST).
(0 = do not print any wet fluxes,
1 = print wet fluxes indicated in output table) 0
ICFRQ integer Printing interval for the concentration fields. Concentrations
are printed every "ICFRQ" hours. (Used only if ICPRT =
1.)
IDFRQ integer Printing interval for the dry flux fields. Dry fluxes are
printed every "IDFRQ" hours. (Used only if IDPRT = 1.)
IWFRQ integer Printing interval for the wet flux fields. Wet fluxes are
printed every "IWFRQ" hours. (Used only if IWPRT = 1.)
IMESG integer Control variable determining if messages tracking the
progress of the run are written to the screen
0 = no
1 = yes (advection step, puff ID)
2 = yes (YYYYJJJHH, # old puffs, # emitted puffs)
IPRTU integer Control variable for selecting units used for concentrations
and deposition fluxes reported in the list file
Concentration Deposition
1 = g/m**3 g/m**2/s
2 = mg/m**3 mg/m**2/s
3 = ug/m**3 ug/m**2/s
4 = ng/m**3 ng/m**2/s
5 = Odour Units
LDEBUG logical Control variable for activation of "debug" write statements F
IPFDEB integer Puff ID number to start tracking in debug option (used only
if LDEBUG = T)
NPFDEB integer Number of puffs to track in debug option (used only if
LDEBUG = T)
NN1 integer Time period (hour) to begin debug output (used only if
LDEBUG = T)
NN2 integer Time period (hour) to stop debug output (used only if
LDEBUG = T)
0
1
1
1
2
1
1
1
1
10
MAR 2006 – CALPUFF
F-56