CALPUFF and Postprocessors

More documents

Recommendations

Info

Table F-2 (Continued) Sample CALPUFF Control File (CALPUFF.INP) Input Group 12 !END! HORIZONTAL SPLIT ---------------- Number of puffs that result every time a puff is split - nsplith=5 means that 1 puff splits into 5 (NSPLITH) Default: 5 ! NSPLITH = 5 ! Minimum sigma-y (Grid Cells Units) of puff before it may be split (SYSPLITH) Default: 1.0 ! SYSPLITH = 1.0 ! Minimum puff elongation rate (SYSPLITH/hr) due to wind shear, before it may be split (SHSPLITH) Default: 2. ! SHSPLITH = 2. ! Minimum concentration (g/m^3) of each species in puff before it may be split Enter array of NSPEC values; if a single value is entered, it will be used for ALL species (CNSPLITH) Default: 1.0E-07 ! CNSPLITH = 1.0E-07 ! Integration control variables ------------------------ Fractional convergence criterion for numerical SLUG sampling integration (EPSSLUG) Default: 1.0e-04 ! EPSSLUG = 1.0E-04 ! Fractional convergence criterion for numerical AREA source integration (EPSAREA) Default: 1.0e-06 ! EPSAREA = 1.0E-06 ! Trajectory step-length (m) used for numerical rise integration (DSRISE) Default: 1.0 ! DSRISE = 1. ! Boundary Condition (BC) Puff control variables ------------------------ Minimum height (m) to which BC puffs are mixed as they are emitted (MBCON=2 ONLY). Actual height is reset to the current mixing height at the release point if greater than this minimum. (HTMINBC) Default: 500. ! HTMINBC = 500. ! Search radius (km) about a receptor for sampling nearest BC puff. BC puffs are typically emitted with a spacing of one grid cell length, so the search radius should be greater than DGRIDKM. (RSAMPBC) Default: 10. ! RSAMPBC = 15. ! Near-Surface depletion adjustment to concentration profile used when sampling BC puffs (MDEPBC) Default: 1 ! MDEPBC = 0. ! 0 = Concentration is NOT adjusted for depletion 1 = Adjust Concentration for depletion MAR 2006 – CALPUFF F-27
Table F-2 (Continued) Sample CALPUFF Control File (CALPUFF.INP) Input Group 13 ------------------------------------------------------------------------------- INPUT GROUPS: 13a, 13b, 13c, 13d -- Point source parameters -------------------------------- --------------- Subgroup (13a) --------------- !END! Number of point sources with parameters provided below (NPT1) No default ! NPT1 = 1 ! Units used for point source emissions below (IPTU) Default: 1 ! IPTU = 1 ! 1 = g/s 2 = kg/hr 3 = lb/hr 4 = tons/yr 5 = Odour Unit * m**3/s (vol. flux of odour compound) 6 = Odour Unit * m**3/min 7 = metric tons/yr Number of source-species combinations with variable emissions scaling factors provided below in (13d) (NSPT1) Default: 0 ! NSPT1 = 1 ! Number of point sources with variable emission parameters provided in external file (NPT2) No default ! NPT2 = 0 ! (If NPT2 > 0, these point source emissions are read from the file: PTEMARB.DAT) --------------- Subgroup (13b) --------------- a POINT SOURCE: CONSTANT DATA ----------------------------- b c Source X UTM Y UTM Stack Base Stack Exit Exit Bldg. Emission No. Coordinate Coordinate Height Elevation Diameter Vel. Temp. Dwash Rates (km) (km) (m) (m) (m) (m/s) (deg. K) ------ ---------- ---------- ------ ------ -------- ----- -------- ----- -------- 1 ! SRCNAM = BLR1 ! 1 ! X = 0.1, -3., 40., 25., 2.2, 10., 450., 1., 1.7E00, 1.0E00, 1.0E-02, 1.0E-01, 2.0E-01, 2.4E-01, 2.5E-01, 2.0E-01 ! 1 ! SIGYZI = 3., 1.5 ! 1 ! ZPLTFM = 0. ! 1 ! FMFAC = 1. ! !END! -------- a Data for each source are treated as a separate input subgroup and therefore must end with an input group terminator. SRCNAM is a 12-character name for a source (No default) X is an array holding the source data listed by the column headings (No default) SIGYZI is an array holding the initial sigma-y and sigma-z (m) (Default: 0.,0.) FMFAC is a vertical momentum flux factor (0. or 1.0) used to represent the effect of rain-caps or other physical configurations that reduce momentum rise associated with the actual exit velocity. (Default: 1.0 -- full momentum used) MAR 2006 – CALPUFF F-28
Page 1: Development of the Next Generation
Page 4 and 5: F. CALPUFF MODEL FILES The CALPUFF
Page 6 and 7: are all equivalent). The variable t
Page 8 and 9: Table F-1 Input Groups in the CALPU
Page 10 and 11: Table F-2 Sample CALPUFF Control Fi
Page 12 and 13: Table F-2 (Continued) Sample CALPUF
Page 42 and 43: Table F-3 CALPUFF Control File Inpu
Page 44 and 45: Table F-3 (Continued) CALPUFF Contr
Page 52 and 53: Table F-3 (Continued) Control File
Page 54 and 55: Table F-3 (Continued) Control File
Page 80 and 81:
Table F-3 (Continued) CALPUFF Contr
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Table F-3 (Concluded) CALPUFF Contr
Page 94 and 95:
c --- c --- c --- c --- c --- c ---
Page 96 and 97:
write(iunit)CLABTK,NDATHR,TEMPK wri
Page 98 and 99:
Table F-4 (Continued) CALMET.DAT fi
Page 100 and 101:
Table F-4 (Concluded) CALMET.DAT fi
Page 102 and 103:
Table F-5 (Continued) CALMET.DAT fi
Page 104 and 105:
F.2.2 ISCMET.DAT CALPUFF can be dri
Page 106 and 107:
Table F-6 Sample ISCMET.DAT files (
Page 108 and 109:
Table F-8 ISCMET.DAT File - Data Re
Page 110 and 111:
table. A description of the content
Page 112 and 113:
Table F-10 PLMMET.DAT File - Header
Page 114 and 115:
F.2.4 SURFACE.DAT and PROFILE.DAT I
Page 116 and 117:
Table F-12 Sample SURFACE.DAT file
Page 118 and 119:
Table F-14 SURFACE.DAT File - Data
Page 120 and 121:
F.3 Point Source Emissions File Wit
Page 122 and 123:
PTEMARB.DAT File - Header Records T
Page 124 and 125:
Table F-17 (Continued) PTEMARB.DAT
Page 126 and 127:
Table F-17 (Concluded) PTEMARB.DAT
Page 128 and 129:
Table F-18 PTEMARB.DAT - Time-Invar
Page 130 and 131:
Table F-19 (Concluded) PTEMARB.DAT
Page 132 and 133:
Table F-20 Sample BAEMARB.DAT file
Page 134 and 135:
Table F-21 BAEMARB.DAT - Header Rec
Page 136 and 137:
Table F-21 (Continued) BAEMARB.DAT
Page 138 and 139:
BAEMARB.DAT File - Data Records The
Page 140 and 141:
Table F-23 BAEMARB.DAT - Time-Varyi
Page 142 and 143:
F.5 Line Source Emissions File With
Page 144 and 145:
LNEMARB.DAT File - Header Records T
Page 146 and 147:
Table F-25 (Continued) LNEMARB.DAT
Page 148 and 149:
Table F-25 (Concluded) LNEMARB.DAT
Page 150 and 151:
Table F-26 LNEMARB.DAT - Time-Invar
Page 152 and 153:
Table F-27 (Continued) LNEMARB.DAT
Page 154 and 155:
Table F-27 (Concluded) LNEMARB.DAT
Page 156 and 157:
Table F-28 Sample VOLEMARB.DAT file
Page 158 and 159:
Table F-29 VOLEMARB.DAT - Header Re
Page 160 and 161:
Table F-29 (Continued) VOLEMARB.DAT
Page 162 and 163:
VOLEMARB.DAT File - Data Records Th
Page 164 and 165:
Table F-30 VOLEMARB.DAT - Time-Inva
Page 166 and 167:
Table F-31 (Concluded) VOLEMARB.DAT
Page 168 and 169:
values in time provided in Input Gr
Page 170 and 171:
Table F-32 (Continued) Boundary Con
Page 172 and 173:
Table F-32 (Continued) Boundary Con
Page 174 and 175:
Table F-33 BCON.DAT File Inputs Var
Page 176 and 177:
Table F-33 (Concluded) BCON.DAT Fil
Page 178 and 179:
Table F-34 Sample User-Specified De
Page 180 and 181:
Table F-35 Sample Hourly Ozone Data
Page 182 and 183:
Table F-36 OZONE.DAT - Header Recor
Page 184 and 185:
Table F-37 OZONE.DAT - Time-Invaria
Page 186 and 187:
F.10 User-Specified Chemical Transf
Page 188 and 189:
F.11 Site-Specific Turbulence Data
Page 190 and 191:
Table F-40 Sample CTDMPLUS Terrain
Page 192 and 193:
Table F-42 HILL.DAT File - Record G
Page 194 and 195:
F.13 Subgrid Scale Coastal Boundary
Page 196 and 197:
COASTLN.DAT File - Header Record Th
Page 198 and 199:
COASTLN.DAT File - Data Records The
Page 200 and 201:
Table F-47 COASTLN.DAT - Data Recor
Page 202 and 203:
Table F-48 Sample Mass Flux Boundar
Page 204 and 205:
Table F-49 FLUXBDY.DAT - Header Rec
Page 206 and 207:
Table F-50 FLUXBDY.DAT - Data Heade
Page 208 and 209:
F.15 CALPUFF Output Files F.15.1 Li
Page 210 and 211:
where the following declarations ap
Page 212 and 213:
Table F-52 (Continued) Unformatted
Page 214 and 215:
Page 216 and 217:
Page 218 and 219:
Page 220 and 221:
Table F-52 (Concluded) Unformatted
Page 222 and 223:
Table F-53 Unformatted CONC.DAT Fil
Page 224 and 225:
F.15.4 Dry Flux File (DFLX.DAT) The
Page 226 and 227:
Table F-54 Unformatted DFLX.DAT fil
Page 228 and 229:
Page 230 and 231:
Page 232 and 233:
Page 234 and 235:
Page 236 and 237:
DFLX.DAT File - Data Records The DF
Page 238 and 239:
Page 240 and 241:
Character*132 COMMENT Character*80
Page 242 and 243:
Page 244 and 245:
Page 246 and 247:
Page 248 and 249:
Page 250 and 251:
Page 252 and 253:
Table F-57 Unformatted WFLX.DAT Fil
Page 254 and 255:
F.15.6 Relative Humidity File for V
Page 256 and 257:
Table F-58 Unformatted VISB.DAT fil
Page 258 and 259:
Page 260 and 261:
Page 262 and 263:
Page 264 and 265:
Page 266 and 267:
VISB.DAT File - Data Records The VI
Page 268 and 269:
Page 270 and 271:
Table F-60 Sample Debug Puff-Tracki
Page 272 and 273:
F.15.8 Mass Flux List File (MASSFLX
Page 274 and 275:
F.15.9 Mass Balance List File (MASS
Page 276 and 277:
F.16 OPTHILL When the subgrid scale
Page 278 and 279:
The following procedure is recommen
Page 280 and 281:
Table F-64 OPTHILL Input and Output
Page 282 and 283:
Figure F-2 Map of terrain surroundi
Page 284 and 285:
Table F-67 OPTHILL Output File for
Page 286 and 287:
This process is simplified somewhat
Page 288 and 289:
G.1 PRTMET Meteorological Display P
Page 290 and 291:
Table G-1 PRTMET Input and Output F
Page 292 and 293:
Table G-2 (Continued) PRTMET Contro
Page 294 and 295:
Table G-2 (Concluded) PRTMET Contro
Page 296 and 297:
Table G-3 Sample PRTMET Control Fil
Page 298 and 299:
Table G-3 Sample PRTMET Control Fil
Page 300 and 301:
Table G-4 Sample PRTMET List File (
Page 302 and 303:
Page 304 and 305:
Page 306 and 307:
Page 308 and 309:
Page 310 and 311:
Table G-6 Sample vector plot file x
Page 312 and 313:
G.2 APPEND The APPEND program is de
Page 314 and 315:
Table G-9 APPEND Control File Struc
Page 316 and 317:
Table G-11 Sample APPEND List File
Page 318 and 319:
G.3 CALSUM The CALSUM program is de
Page 320 and 321:
Table G-13 CALSUM Control File Stru
Page 322 and 323:
Table G-15 Sample CALSUM List File
Page 324 and 325:
G.4 POSTUTIL POSTUTIL operates on o
Page 326 and 327:
The name and full path of each file
Page 328 and 329:
Table G-17 (Continued) POSTUTIL Con
Page 330 and 331:
Table G-18 Sample POSTUTIL Control
Page 332 and 333:
Table G-18 (Continued) Sample POSTU
Page 334 and 335:
INPUT GROUP: 2 -- Species Processin
Page 336 and 337:
1 g of SO 2 contributes 0.500000 g
Page 338 and 339:
Table G-19 (Continued) Sample POSTU
Page 340 and 341:
Table G-19 (Concluded) Sample POSTU
Page 342 and 343:
When CALPOST is directed to perform
Page 344 and 345:
Table G-20 (concluded) CALPOST Inpu
Page 346 and 347:
G.6 CALPOST Input Files G.6.1 User
Page 348 and 349:
Table G-21 CALPOST Control File Inp
Page 350 and 351:
Table G-21 (Continued) CALPOST Cont
Page 352 and 353:
Page 354 and 355:
Page 356 and 357:
Table G-21 (Concluded) CALPOST Cont
Page 358 and 359:
Table G-22 (Continued) Sample CALPO
Page 360 and 361:
INPUT GROUP: 2 -- Visibility Parame
Page 362 and 363:
Page 364 and 365:
Table G-22 (Concluded) Sample CALPO
Page 366 and 367:
Table G-24 Sample Background Concen
Page 368 and 369:
Table G-26 Sample Nephelometer File
Page 370 and 371:
G.7.4 Time-series File(s) CALPOST c
Page 372 and 373:
Page 374 and 375:
Table G-27 (Concluded) Sample CALPO
Page 376 and 377:
Table G-29 Sample DATA Plot-File (P
Page 378 and 379:
Table G-30 (Concluded) Plot-File GR
Page 380 and 381:
Table G-32 Time-series File Record
Page 382 and 383:
VOLUME II & III REFERENCES Allwine,
Page 384:
Strimaitis, D.G., R.J. Yamartino, E
show all

CALPUFF and Postprocessors

Create successful ePaper yourself

Delete template?

Save as template?