Catalog sheets - TGN motors and AKD servoamplifiers - TG Drives

More documents

Recommendations

Info

Production and delivery of servodrives and control systems. The Czech company TG Drives offers servodrives since 1995 for machines and equipments in industrial automation. The range of service of our technicians and programmers includes design, optimization including custom solutions, programming, configuring and start up. Servodrives and control systems from TG Drives are used in the cutting tables, CNC machines and machining centers, automotive, rubber, food, glass and construction industries. Easy solution of every motion 1. Servomotors TGN, TGH and TGT synchronous servomotors with permanent magnets 2. Digital servoamplifiers AKD digital servoamplifiers TGA300 digital servoamplifiers S700 digital servoamplifiers TGP three-axis digital servoamplifiers TGA-24 and TGA-48 digital servoamplifiers 3. Precision mechanical systems EXLAR linear actuators DRIVESPIN precision rotary actuators TWINSPIN cycloidal reducers high precision planetary reducers 4. TG Motion control system 5. Industrial PCs and operator terminals ASEM panel and standard industrial PCs ESA operator terminals Our services Design and optimization of servodrives. Design of control system. Programming. Start up. Customer service. TG Drives, s. r. o. Jeneweinova 37 CZ 617 00 Brno Tel.: +420 545 234 935 Fax: +420 545 234 735 E-mail: info@tgdrives.cz www.tgdrives.cz
Servomotors TGN synchronous servomotors AC synchronous servomotors have a three-phase distributed stator windings and permanent magnets on the rotor. The winding is designed for sinusoidal current and voltage. A thin layer of magnets (neodymium / iron / boron) is located on the surface of the rotor shaft, which causes a small inertia torque of motor. Higher torque, then higher power of the TGN motor range is achieved by improving escape of heat from the stator to the front flange and by optimized magnetic circuit. Shortening of stator plates and segmented stator windings with higher density of magentic field allows shortening of the motor length. These advantages increase the ratio of torque to the dimensions of motor and expand usage of the motors to other applications. Holding Brake All servomotors can be delivered with or without a built-in electromagnetic holding brake. The brake is not intended for the positioning. The purpose of the brake is to lock the motor in zero speed. Supply voltage: 24 VDC −0 % +10 % Location: Back side of servomotor. Feedback The flexible design of servomotors allows different feedback sensor mounting. The most frequent types are: Resolver is a brushless electric appliance, used for rotor position measuring and for commutation angle derivation. Resolver is commonly used as a position and angle speed sensor in regulation circuits of servoamplifiers. EnDat is high resolution encoder with a data channel. The absolute position is sent through a fast serial interface. The sine – cosine shape of the incremental signals (1Vpp) provides highly accurate positioning. (100.000 increments per revolution). The EnDat sensor could be single-turn or multi-turn (4096 turns). Hiperface is – like EnDat – a high resolution encoder with a data channel. The absolute position is sent through a fast serial interface. The sine – cosine shape of the incremental signals (1Vpp) provides highly accurate positioning. (100.000 increments per revolution). The sensor could be singleturn or multi-turn (4096 turns). Comcoder is a combined incremental encoder. An absolute position is given through the commutation signalsof three Halls. The incremental signals(5V TTL) provides accurate positioning. Temperature protection The temperature of the winding is monitored by sensors in the stator windings. The temperature is then signaled via an electrically isolated contact (thermo contact or posistor). The sensors are set so that the winding temperature does not exceed 150°C. The type of temperature protection should be specified. Technical data Design: flange, B5 Colour: matt black Bearings: closed ball-bearings with grease Protection: IP64 (IP54 as shaft motor part), as an option IP67 including shaft protection Insulation class: F Cooling: convection (type A) Temperature: according to the ČSN EN 60034, rise of temperature T = 110°C, ambient temperature T = 40°C Load cycle: continual (S1) Electrical connection: connectors, connectors counterparts or cable bushings TGN servomotors are produced for different DC-bus voltages (36V, 320V, 560V) and for different nominal speed (500, 1000, 1500, 2000, 3000, 4500 rpm). The catalogue includes motors with nominal speed 3000 rpm (except some types of TGN2 and TGN3) and DC-bus voltage 36V, 320V and 560V. We can send you technical parameters of motors designed for other DC-bus or speed on demand. 1
Page 1: Servodrives TGN servomotors AKD dig
Page 5 and 6: Servomotors Dimensions of connector
Page 7 and 8: Servomotors Dimensions of TGN2 with
Page 9 and 10: Servomotors TGN4 servomotors 5.1-11
Page 11 and 12: Servomotors TGN6 servomotors 18-44
Page 13 and 14: Servoamplifiers Servozesilovače AK
Page 15 and 16: Notes: 12-13

Catalog sheets - TGN motors and AKD servoamplifiers - TG Drives

Create successful ePaper yourself

Delete template?

Save as template?