Attachments. - Weidemann GmbH

These options will make you an expert.
Professional attachment use.
Separate oil cooler: Additional oil cooler
for jobs with attachments that require
a high litre capacity (e.g. a mulcher).
Advantages:
- Better cooling of the oil.
- Longer work times are possible.
Separate 4th control circuit that
can be operated independently and
individually (front and rear possible):
The vehicle has a double-action auxiliary
control circuit.
Advantage:
- Allows hydraulic attachments with
several connections and functions
to be used (e.g. a snow blower).
Electrical connections (front and rear):
Connections for electrically operated attachments
or attachments with additional
functions (e.g. sweeping machine with
water spraying mechanism).
Advantages:
- Allows the use of electrically operated
attachments.
- Allows switching over from attachments
with a hydraulic function.
Comfortable air-cushioned seat with seat
heating: The best ergonomical position can
be set to suit every size and type of driver.
Advantages:
- The driver doesn't get tired as quickly
when working for longer periods.
- Long-term investment in the driver's
health.
Quick-action couplings (Faster):
A coupling that allows several hydraulic
hoses to be connected in one movement,
even under pressure.
Advantage:
- Clear time saving during attachment.
High Flow (1160, 2070 CX80, 3070 CX80
und T4512): The vehicle has High Flow volume
flow increase and two control lines.
Advantage:
- Allows driving of frontal attachments
with a separate oil motor drive that
require greater hydraulic performance
(e.g. a snow blower).
Lifting arm damping from the 13 series
upwards: The lifting arm damping cushions
and dampens loading system and load
vibrations during transport runs.
Advantages:
- Improved driving comfort.
- Greater driving safety.
- Higher driving speeds are possible.
- Less stress on the machine.
Air conditioning system (from
series 2070): The vehicle is equipped
with an air-conditioning system.
Advantages:
- Pleasant working when outside temperatures
are high.
- Increases cleanliness and the feeling
of well-being in the cab, thanks to
filtering of the inside air.
- No misted-up windscreens during
winter use.
Proportional control (3070 CX T, 4070
CX T, 4270 CX T, 4080T and 5080T):
High-performance hydraulics with proportional
control. The 3rd control circuit and
the telescoping function are controlled
proportionally with this option.
Advantage:
- Sensitive operation of the 3rd control
circuit and the telescoping function.
- Shorter loading times and greater
economy.
Engine pre-heater: Cold start help at
temperatures below -5 °C. Heating elements
heat up the cooling water on the gravity
principle (warm liquid rises, cold water
flows down).
Advantages:
- Easier to start the engine when outside
temperatures are low.
Speed increase to 30 km/h: The vehicle
is capable of a speed of 30 km/h.
Advantage:
- Faster positioning of the machine is
possible.
- Time saving and greater economy.
Manual inching: The crawler device allows
very slow driving speeds to be attained at
a constant engine speed.
Advantage:
- It is not necessary to permanently press
the foot inching pedal when using attachments
that are operated e.g. at a
constantly high rotation speed but at the
same time at a very low driving speed
(e.g. a sweeping machine).
58_59