Quickie® S11 - Sunrise Medical
Quickie® S11 - Sunrise Medical
Quickie® S11 - Sunrise Medical
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Step 3 - Shroud<br />
Disassembly/Reassembly, and Adjustment (cont)<br />
Disassembly<br />
a. Lift the center shroud from the main frame (figure A4.7).<br />
Note: Center shroud is attached using a hook and loop fastener<br />
system.<br />
b. Use 4mm allen wrench to remove the fenders (figure<br />
A4.8).<br />
Reassembly<br />
a. perform the reverse of instructions above.<br />
A4.7<br />
A4.8<br />
Step 4 - Caster Arm<br />
Disassembly<br />
a. Use 6mm allen wrench and 17mm deep socket wrench to<br />
remove the mounting bolt (fi gure A4.9).<br />
Reassembly<br />
a. perform the reverse of instructions above.<br />
Adjustment<br />
Note: The front caster arm can be adjusted from pivoting<br />
slowly (fi gure A4.10).<br />
a. Use a 4mm Allen wrench to back off the set screw and<br />
use a 8mm bolt head (13mm Allen wrench) to loosen or<br />
tighten the socket head bolt and make the proper adjustment<br />
(operator preference).<br />
Set Screw<br />
A4.9<br />
Socket Head Bolt<br />
A4.10<br />
SUNRISE MEDICAL<br />
QUICKIE S-11 SERVICE MANUAL 2005<br />
PAGE 13
Change language