Appendix

13. Function Code List
13.4 Data Format List
You can use the following formats to access function codes through the link and these formats are
common to the FRENICS500VG7S models.
13.4.1 Data Type 0 to 13
You can basically exchange data in the data types from 0 to 13.
Code Description Display/setting Resolution Notes
0 Integer 0, 1, 2, 3, ⋅⋅⋅⋅⋅⋅ 1
1 Integer 0, 2, 4, 6, ⋅⋅⋅⋅⋅⋅ 2 Only for pole number of motor
2 0.0, 0.1, 0.2, ⋅⋅⋅⋅⋅⋅ 0.1
3 Fixed point
0.00, 0.01, 0.02, ⋅⋅⋅⋅⋅⋅ 0.01
4
0.001, 0.002, 0.003, ⋅⋅⋅⋅⋅⋅ 0.001
5 Integer (signed) -2, -1, 0, 1, 2, ⋅⋅⋅⋅⋅⋅ 1
6 -0.1, 0.0, 0.1, ⋅⋅⋅⋅⋅⋅ 0.1
7 Fixed point (signed) -0.01, 0.00, 0,01, ⋅⋅⋅⋅⋅⋅ 0.01
8
-0.001, 0.000, 0.001, ⋅⋅⋅⋅⋅⋅ 0.001
Initial cursor position is left end.
Cursor does not move automatically.
9 Hexadecimal 1A8E 1h
When setting range is from 00 to 11,
you should specify individual digits to
set only 00, 01, 10, or 11.
10 Special data 3 0.75, 1, 2, ⋅⋅⋅⋅⋅⋅ 14, 15 Carrier frequency setting
11 Operation data 1 Reset to 0 after writing
12
13
Exponent/mantissa 1
Exponent/mantissa 2
0.01
0.01
See 13.4.2 "Data Type 12 to 127"
13.4.2 Data Type 12 to 127
The following data have special formats.
Type [12]: Time, current, power, PID process values
15 14 11 9 0
Type [13]: Current and others
15 13 0
Mantissa ⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅ Exponent=0: 0 to 999, Exponent=1
to 3: 100 to 999
Exponent⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅ 0: 0.01 times (0.00 to 9.99)
1: 0.1 times (10.0 to 99.9)
2: 1 times (100 to 999)
3: 10 times (1,000 to 9,990)
Polarity⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅ 0: Positive (+), 1: Negative (−)
Mantissa ⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅ Exponent=0: 0 to 9999, Exponent=1
to 3: 1,000 to 9,999
Exponent⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅⋅ 0: 0.01 times (0.00 to 99.99)
1: 0.1 times (100.0 to 999.9)
2: 1 times (1,000 to 9,999)
3: 10 times (10,000 to 99,990)
13-29