SOLDIER'S MANUAL AND TRAINER'S GUIDE MOS 250N ... - AskTOP

STP 11-250N-SM-TG
Performance Measures GO NO GO
a. TPN (net ID).
b. Developed and interpreted SAR/GAR.
c. Special circuits.
4. Determined network timing requirements. —— ——
5. Established Parent Switch (master/slave) relationship. —— ——
6. Identified COMSEC Parent Switch. —— ——
a. Determined network keying and rekeying requirements.
b. Developed crypto-key distribution plan.
c. Developed crypto-key variable management plan.
7. Identified Defense Red Switch connectivity requirements for CINC support. —— ——
8. Determined transmission media requirements (SHF, TROPO, EHF, UHF,
VHF/RAU, fiber or cable, ATM, wireless, COTS, satellite, and STEP).
a. Determined signal equipment availability.
b. Determined signal system and satellite interface and configuration
requirements.
c. Determined hybrid transmission interface and connectivity requirements.
d. Determined digital transmission group requirements (8/9-channel modularity,
radio frequency, etc.).
e. Determined commercial leased lines and interface equipment requirements.
f. Developed and interpreted crew assignment worksheets.
—— ——
9. Prepared system diagram, network diagrams, and OPORD appendix. —— ——
10. Determined EUB and duplication scheme. —— ——
11. Determined PAL requirements and develop PAL distribution plan. —— ——
12. Developed reconstitution and contingency plan for the network. —— ——
Evaluation Guidance: Score the soldier GO if all steps are passed. Score the soldier NO GO if any
step is failed. If the soldier fails any step, show what was done wrong and how to do it correctly.
References
Required
TM 11-5805-778-12-1
TM 11-5805-778-12-2
TM 11-5805-778-12-3
TM 11-5805-778-12-4
TM 11-5805-778-12-5-1
TM 11-5805-778-12-5-2
TM 11-5805-778-12-6
TM 11-5805-778-12-7
Related
3-25