SOLDIER'S MANUAL AND TRAINER'S GUIDE MOS 250N ... - AskTOP

STP 11-250N-SM-TG
Subject Area 2: MESSAGE SWITCHING
Direct the Installation and Integration of a Message Switch
113-324-7003
Conditions: You are assigned to a message switch team. You are given an OPORD, a team of soldiers,
appropriate references, and a message switch.
Standards: The message switch was operational IAW the OPORD.
Performance Steps
1. Initialize the Power Group.
2. Initialize the Central Processor Group (CPG).
3. Initialize the Time Division Interface Module (TDIM) Group.
4. Initialize the Common Interface Group (CIG).
5. Initialize the Communications Group.
6. Perform on-line procedures.
7. Perform shutdown procedures.
8. Conduct risk assessment.
Performance Measures GO NO GO
1. Initialized the Power Group. —— ——
2. Initialized the CPG. —— ——
3. Initialized the TDIM Group. —— ——
4. Initialized the CIG. —— ——
5. Initialized the Communications Group. —— ——
6. Performed on-line procedures. —— ——
7. Performed shutdown procedures. —— ——
8. Conducted risk assessment. —— ——
Evaluation Guidance: Score the soldier GO if all steps are passed. Score the soldier NO GO if any
step is failed. If the soldier fails any step, show what was done wrong and how to do it correctly.
3-6