Draft Commander 3000® A/T Mobile Fire Pump - Weis Fire & Safety ...

More documents

Recommendations

Info

Drafting Water With The Draft Commander 3000® A/T Mobile Fire Pump Testing & Training Simulator As Per NFPA – 1911 2012 Standards Revised 7-2012 Page 8
Draft Commander 3000® A/T Mobile Fire Pump Testing & Training Simulator Specifications MODEL NUMBER DC1911-3000 A/T Purpose Specific Engineered Aluminum Heavy Duty DOT Rated Transporter: ‣ The Aluminum Draft Commander 3000® A/T transporter is specially designed and manufactured only for the Draft Commander 3000® A/T to maintain a low profile for minimal wind resistance, weight distribution, and safety. ‣ The front of the Draft Commander 3000® A/T transporter is equipped with an aluminum tread plate shield 46 ¾” high by 78” wide to protect and reduce wind drag when transporting. ‣ There is to be a minimum of 18” between the front shield and the front of the Draft Commander 3000® reservoir. This space is for extra storage for equipment and to gain access to the front ventilator. ‣ Two (2) 6,000 lbs. Torflex 22 ½” up axles with 12,000 GVWR equipped with electric brakes. ‣ Aluminum transporter designed and engineered for distribution of weight of the Draft Commander 3000® A/T and its components. ‣ Two (2) sets of mud flaps to be installed on transporter. ‣ Equipped with four (4) 7000 lb. capacity screw type jacks to support transporter when the reservoir is filled with water. Jacks are located: two (2) on left side and two (2) on right side. ‣ One (1) 10,000 lb. tongue jack. ‣ Equipped with load transporter tires, ICC Lights, work lights, stop, and turn signal lights. ‣ Equipped with a crossbar at rear 15” high above the Draft Commander 3000® A/T with stop, tail, and turn signal lights. ‣ 3M reflective tape on front, rear, and sides of unit. ‣ Floor of transporter to be extruded aluminum. Note: Wood or steel flooring is not acceptable ‣ Folding rear step and work area of transporter is 16” deep X 77” wide. ‣ Fenders of transporter to be aluminum tread plate and equipped with two hold brackets for mounting the entrance steps for entering the pitot nozzle changing compartment. ‣ OAW (less water) not to exceed 6,500 lbs. ‣ Over all height not to exceed 70 inches (low profile). ‣ Over all length not to exceed 27 feet. ‣ Standard RV 7 pin electrical connector. Revised 7-2012 Page 9
Page 1 and 2: Draft Commander 3000® A/T Mobile F
Page 3 and 4: Revised 7-2012 PUMPING WITH CLEAN C
Page 5 and 6: 1 ¾” Fire Hose: _______________
Page 7: Revised 7-2012 Page 7
Page 11 and 12: 3,000 GPM plus. ‣ One (1) liquid
Page 13 and 14: ‣ One (1) etched fire pump test f
Page 15 and 16: FIRE PUMP TEST FLOW CHART DRAFT COM
Page 17 and 18: Elma, NY Hayfork, CA Raton, NM Phon
Page 19 and 20: Revised 7-2012 Page 19
Page 27: “Having our apparatus pump tested

Draft Commander 3000® A/T Mobile Fire Pump - Weis Fire & Safety ...

Create successful ePaper yourself

Delete template?

Save as template?