Draft Commander 3000® A/T Mobile Fire Pump - Weis Fire & Safety ...
Draft Commander 3000® A/T Mobile Fire Pump - Weis Fire & Safety ...
Draft Commander 3000® A/T Mobile Fire Pump - Weis Fire & Safety ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Revised 7-2012<br />
PUMPING WITH CLEAN CLEAR WATER<br />
MODEL NUMBER: DC1911-3000 A/T<br />
THE DRAFT COMMANDER <strong>3000®</strong> A/T MOBILE FIRE PUMP TESTING & TRAINING<br />
SIMULATOR DEMANDS YOUR FIRE APPARATUS HAS BEEN TESTED AND IS<br />
READY FOR ITS EMERGENCY CALL<br />
The <strong>Draft</strong> <strong>Commander</strong> <strong>3000®</strong> A/T is a SOLE SOURCE mobile fire pump testing and training<br />
simulator from draft laboratory and is exclusively manufactured by <strong>Weis</strong> <strong>Fire</strong> & <strong>Safety</strong> Equipment<br />
Company, Inc. in Salina, Kansas. The <strong>Draft</strong> <strong>Commander</strong> <strong>3000®</strong> A/T offers unmatched simplicity,<br />
accuracy and safety allowing a true fire pump test from draft with clean clear water. The <strong>Draft</strong><br />
<strong>Commander</strong> <strong>3000®</strong> A/T is a proven testing and training device since 2002 testing thousands of fire<br />
trucks by municipalities, government agencies, commercial and industrial fire apparatus service<br />
agencies utilizing the <strong>Draft</strong> <strong>Commander</strong> <strong>3000®</strong> A/T. This unit performs pump service tests up to<br />
3,000 plus GPM as per NFPA-1911 and ISO Guidelines.<br />
Conventional testing of a pumper has involved the grueling task of finding a standing water source<br />
such as swimming pools, lakes or streams. Suitable water sources are becoming more difficult to<br />
access and water levels are unpredictable. Water cleanliness can vary causing abrasive premature<br />
pump wear. Test pits often contain dirty run off water and sediment and require transport to and<br />
from. The <strong>Draft</strong> <strong>Commander</strong> <strong>3000®</strong> A/T comes with all hoses, a complete set of testing discharge<br />
tips, and a portable testing <strong>Draft</strong> <strong>Commander</strong> <strong>3000®</strong> A/T telescoping monitor simulator station.<br />
<strong>Pump</strong> testing can be done at the firehouse or a desired location with no apparatus or personnel<br />
downtime in the event of an emergency fire call.<br />
The <strong>Draft</strong> <strong>Commander</strong> <strong>3000®</strong> A/T allows you to perform a true pump test from draft creating a<br />
suction lift requiring the use of a primer as per NFPA 1911-2012 Edition, Section 18.7.5.1. This<br />
makes sure the engine and fire pump are performing with the correct horsepower and the fire pump<br />
is pumping the correct GPM. This service test is done by working from a suction lift throughout the<br />
test with flowing clean clear water as per NFPA-1911 up to 3000 GPM. This service also allows you<br />
to test your fire truck at your desired location, at any time, and during various seasons of the year.<br />
The <strong>Draft</strong> <strong>Commander</strong> <strong>3000®</strong> A/T offers fire departments a cost effective means of complying with<br />
their annual pump test requirements as defined by ISO and the National <strong>Fire</strong> Protection<br />
Page 3
Change language