ORION EM G

SIGNAL GENERATORS
EMG -1165 TR-0550 Crystal-controlled Signal Generator
The instrument furnishes calibrated HF signals which can be used either
unmodulated or amplitude modu lated. Fully transistorized.
Frequency range :
Frequency accuracy :
Frequency calibration:
Output voltage :
Modulation :
Dimensions:
100 kc/s to 30 Mc/s
± 1%
by means of a built-in
1 Mc/s
quartz oscillator
0.5 .uV to 100 mY
{int~ 50 ohms)
internal AM
(400 or 1,000 cfs)
external AM
200x260x280 mm
EMG-1168 TR-0503 Crystal-controlled Laboratory Signal Generator
This is a high-accuracy signal generator operating in the 50 kcfs to
65 Mcfs frequency range. By means of the built-in crystal oscillator hig h
accuracy of frequency calibration can be obtained.
Frequency range:
SO kcfs to 6S Mc/s
Frequency accuracy: ± 1%
Frequency calibration :
Output voltage:
Modulation:
Dimensions:
by means of a built-in
quartz oscillator with
10- • accuracy
0. 1 '! V to 3 V
{into SO ohms)
internal AM
(400 or 1,000 cis)
external AM
300 X 500 X 380 mm
EMG-1173 /2 TR-0604 VHF Signal Generator {AM-FM­
Video-Stereo)
:
The instr ument can be used in almost al l fields of telecommunication
engineering where in the frequency range of 4 to
300 Mc/s an AM , FM, video-, stereo-, or pulse modulated highly
accurate H F sig nal source is needed.
Frequency range:
Frequency accuracy :
Output vo ltage:
Modulation·
Dimensions :
4 to 300 Mc fs
± 1%
0.5 iJ.V to 100 mV .
0.5 iJ.V to 1 V,
resp.
internal.
exter nal AM ,
internal ,
external FM ,
video, stereo, pu lse
317 X S70 X 340 mm
EM G-11 75 /2 TR-0602 UHF Signal Generator
Owing to its wide modu lation and other control faci li ties, the
instrument can be used for performing a variety of UH F measurements.
Frequency range :
Frequency accuracy:
Output voltage :
Modulation:
Dimensions :
250 to 1,000 Mcfs
± 1%
O.S iJ.V to 100 mV,
0.5 (J.V to 4 V,
resp.
internal square wave,
internal,
external AM.
internal.
external FM,
external video, pulse
330 x 580 x 380 mm