ORION EM G

EMG-2372 DD-250 Transistorized Stroboscope
The instrument can be used for determining the speed of rotating
machine element, motors and gear transmissions. By means of
the glow tube of the instrument, the measurement can be performed
employing the stroboscopic effect. The instrument is fully
transistorized, it has small dimensions, is battery operated.
Measuring range:
500 to 15,000 r.p.m.
(flash frequency)
Reading :
on direct reading
frequency meter
Accuracy of frequency meter: ±2% f.s.d.
Dimensions:
166 x 237x 100 mm
INDUSTRIAL MEASURINCi
INSTRUMENTS
EMG-2355 RZ-007 Transistorized Strain Gauge Measurin1
Bridce
The instrument is suitable for static and dynamic measurements
of mechanical deformat ions. Measurements might be pe rformed
e ither by the two- or by the four-gauge method. The Instrument
is fully transistorized, it has small dimensions and is battery
operated.
Measurable strain in middle position of
measuring range extender switch:
Full measuring range in extreme positions
of measuring extender switch :
Controllability of measuring li mits:
Maxi mum adjustment accuracy:
± 129.,, i.e. 12.10- 3 t
(specific strain)
+ or - 2-4o/ 00,
i.e. 24.10- 3 e
(specific strain)
in steps of 1X,.,
further 2%o
continuously
± 0.01 %.,
i.e. ±1.10- 5 t
Frequency measurable with dynamic
measurement:
0 t o 200 cjs
Dimensions :
220 X 280 X 225 mm
The field of application of t he instrument can be widened considerably
by using t he adapte r type EMG-2352 (RZ-00-4). By
means of t he adapters deformations can be measured on nu merous
measuring places (max. 12 by adapter).
and
:
Expom4 by
EMG
WOP.t