Tait Flyer P25 TM9100 Mobile Configurations - contact@epi-groupe ...

P25 MOBILE 

CONFIGURATIONS 

P25 mobile configurations for public safety 

Public safety organizations are always ready to respond. Teams and task-forces 

often have differing communications needs across many vehicle types. 

Tait’s mobile solutions are reliable, customizable and designed with the user 

in mind leaving public safety agencies to focus on getting the job done. 

The Tait P25 series of 9100 mobiles is designed specifically to improve the 

convenience and safety of public safety users, no matter the vehicle, the 

network or the location. Tait P25 mobiles are available in several configurations 

for conventional, trunked and simulcast systems, so interoperable 

communications are always at hand. 

Why choose tait P25 mobiles 

• Proven interoperability: Tait mobiles are tested for interoperability on 

other vendors’ networks as part of the P25 Compliance Assessment 

Program (P25 CAP). Tait radios fulfil performance criteria for use upon 

state-wide networks*. 

• Common interface: The TM9100 (in all configurations), hand-held control 

head (HHCH), and the TP9100 portable have identical displays and 

programming easing the users’ training burden. 

• Encryption options: To improve officer safety with secure communications, 

the TM9155 model is available with FIPS 140-2 certified encryption and 

Over-The-Air Rekeying (OTAR) support. 

• Tait Tough: Built to Tait’s demanding standards (and tested beyond 

MIL-STD-810 F) improves reliability and lowers the cost of ownership. 

• Flexible and customizable: High and low tier (TM9155, TM9135) mobiles 

with either local or HHCH options, are available in 110W and remoted 

configuration options. The dual head configuration is available only on the 

high tier mobile (TM9155). 

• Network options: Tait P25 mobiles work on P25 conventional, trunked and 

simulcast networks, in VHF, UHF and 700/800 MHz bands. 

• Tait services: Work with Tait to ensure your communications solution is 

designed, deployed and supported in ways that are right for your needs. 

• Software enhancements: Software licences allow a solution that 

is readily extended as needs change, removing the risk of 

hardware modifications and factory returns. 

*Contact your local Tait representative for more information. Tel : +33 (0) 1 30 75 11 67 

www.epigroupe.com

A B C D 

A) Standard control head 

inset: non keypad mic 

Tait offers high and low temperature LCD options with 

adjustable contrast to ensure a Tait mobile will have optimized 

screen visibility in all environments. A mobile GPS display option 

integrates the location function into the radio and reduces the 

need for a separate “on dash” unit. As standard, the TM9100s 

have a built-in integrated covert microphone. 

B) Hand-held control head (HHCH) 

inset: color customization 

The TM9100 HHCH option is ideal for space-constrained vehicle 

installations. Stowed out of sight in a glove compartment or 

under a seat, this option is perfect for use in covert operations 

and unmarked vehicles. With the powerful 10W external 

speaker, vehicles can benefit from remote cable kits, 

vizor-mounted microphones and gearshift PTT buttons for the 

ideal surveillance solution. 

C) Dual head configuration**: 

low-temp, heated LCD (std pkg) 

inset: hi-temp, non-heated lcd configuration 

With two standard heads connected to one P25 TM9155 mobile 

radio body, the dual head option allows communications for two 

parties in separate areas of a building or vehicle, for example, 

in an ambulance. 

D) Remote head configuration 

When in-vehicle cab space is limited, the remote head 

configuration allows for the radio body to be installed in the 

trunk of the car. The standard control head of the TM9100 

series can be located up to 6m or 12m with a single cable, and 

up to 1,094 yards (1 km) away with additional hardware. 

SAS EPI FRANCE 

Entreprise des Produits industriels 

12 Chaussée Jules César 95520 Osny France 

Tel : +33 (0) 1 30 75 11 67 

Fax :+33 (0) 1 30 75 12 67 

contact@epi-groupe.com 

Specifications are subject to change without notice and shall not form part of any contract. 

They are issued for guidance purposes only. 

Specifications 

Standard 

control head † Environmental stds* MIL-STD-810 C, D, E and F 

Sealing* 

LCD options* 

Customizable options 

IP54 for dust and rain 

Low-temp, heated LCD (std) 

-22°F to +140°F (-30°C to +60°C) 

Hi-temp, LCD 

+5°F to +185°F (-15°C to +85°C) 

Head and lens surround* 

(including head color, logo) 

Keymat - four custom keys available 

(there may be some restrictions on colors, 

fonts and number of characters used) 

Remoted length

TM9135 

SPECIFICATIONS 

Tough, 

reliable and 

interoperable. 

TM9135 mobile radios provide affordable 

and reliable digital communications for 

Public Safety users who need exceptional 

audio clarity without provision for all 

possible features or configurations. 

key features 

}} 

Radios can be used on analog, P25 conventional, trunked and 

simulcast networks 

}} 

Out of the box and onto the shift - the TM9135 is a radio designed for fast 

integration onto a digital network (the P25 CAI is included) 

}} 

Hand-held control head (HHCH) option 

}} 

Ease of operation: all user controls and menu functions are identical across all the 

Tait P25 portables, mobiles and HHCHs 

}} 

Tested beyond MIL-STD-810C, D, E and F 

}} 

Supports individual, group, broadcast and emergency calls 

}} 

Advanced voting optimizes channel reception 

}} 

User programmable scan 

} } Comprehensive scanning features including P25 talk group, priority, dual priority 

and editable scanning 

© Tait Limited 2012. SM9135-270712.90

TM9135 


Tait Tough radio 

Reliable and durable TM9135 mobile 

radios have been built to withstand 

the extremes of nature. 

A high temperature display option 

on Tait mobiles optimizes screen 

visibility in hot environments. 

Interoperability assured 

Genuine open standards ensure 

choice, value and responsiveness 

during routine operations or crises. 

Digital audio clarity 

Crystal clear digital audio allows 

precise communication even in 

noisy situations. 

Analog operation for phased 

transition 

Protect your current analog 

investment and migrate to P25 at 

your own pace. 

Analog mode allows communication 

between various partner agencies 

signaling options including 

MDC1200 encode/decode and 

Two Tone decode.* 

*A separately enabled option. 

Tailored functionality 

This radio will provide the essential 

network performance required by 

Public Safety users who need 

exceptional audio clarity without 

provision for all possible features 

or configurations. 

For more advanced functionality users 

should consider investing in the TM9155 

for long term flexibility. 

Above left: Colored TM9135 HHCHs 

shown in red, green and yellow. 

Please contact your local Tait 

representative for more information on 

color options. 

© Tait Limited 2012. SM9135-270712.90 


TM9135 


General 

Frequency ranges Frequency band† Transmit power Transmit current (typical) 

VHF 

UHF 

700/800MHz 

Frequency stability 

Channel/zones 

Talk groups 

Scan groups 

Power supply 

Channel spacing 

136–174MHz 

136–174MHz** 

136–174MHz 

350–400MHz** 

380-420MHz** 

400–470MHz 

450–530MHz 

450–520MHz 

450–520MHz 

Transmit 

762–776MHz 

792–825MHz 

850–870MHz 

Receive 

762–776MHz 

850–870MHz 

±1.5ppm (-22ºF to 140ºF/-30ºC to 60ºC) 

1,000 channels/30 zones 

25W 

50W 

110W 

40W 

40W 

25W 

25W 

25W 

40W 

30W (806MHz) 

26 talk group lists comprised of up to 50 members each 

300 with up to 50 members each, maximum of 2,000 members total 

10.8–16VDC 

Frequency increment/channel steps 2.5/5/6.25 

Dimensions (DxWxH) control head 

Dimensions (DxWxH) radio body 

25W 

30/35/40/50W 

110W 

Weight control head 

Weight radio body 

25W 

30/35/40/50W 

110W 

Operational temperature 

Sealing 

RF connector 

Interface connectors 

Analog signaling options 

Transmitter 

Output power 

25W 

30W 

35W 

40W 

50W 

110W 

Modulation limiting 

25/30kHz channel 

12.5kHz channel 

FM hum and noise (typical) 



12.5/15/20/25/30kHz 

1.38 x 7.24 x 2.8in (35 x 184 x 71mm) 

6.9 x 6.3 x 2.1in (175 x 160 x 52mm) 

7.7 x 6.3 x 2.1in (195 x 160 x 52mm) 

14.6 x 9.8 x 5in (370 x 250 x 121mm) 

11.6oz (330g) 

42.3oz (1200g) 

49.4oz (1400g) 

296oz (8400g) 

-22ºF to 140ºF (-30ºC to 60ºC) 

IP54 dust and rain 

50 ohm BNC or Mini UHF 

3 Interface Connectors with Serial Ports 

MDC1200 encode/decode, Two Tone decode, PL (CTCSS), DPL (DCS) 

TM9135 


Receiver (typical figures shown) 

Analog sensitivity VHF/UHF VHF 50W VHF 110W 700/800MHz 

Military Standards 810 C, D, E and F 

Applicable MIL-STD 

Low pressure 

High temperature 

Low temperature 

Temperature shock 

Solar radiation 

Rain 

Humidity 

Salt fog 

Dust 

Vibration 

Shock 

Regulatory Data 

USA 

Canada 

Europe 

12dB SINAD 0.28µV (-118dBm) 0.315µV (-117dBm) 0.25µV (-119dBm) 0.28µV (-118dBm) 

Digital sensitivity (TIA/EIA-102) 

5%BER 0.22µV (-120dBm) 0.233µV (-120dBm) 0.18µV (-122dBm)*** 0.18µV (-122dBm) 

Intermodulation rejection (TIA/EIA 102) -75dB -75dB -70dB -75dB 

Adjacent channel selectivity 

25/30kHz channel (TIA/EIA 603a) 

12.5kHz channel (TIA/EIA 102) 

Australia/New Zealand 

VHF 

UHF 

800MHz 

Method 

25/30/35/50/110W 

500.4 

501.4 

502.4 

503.4 

505.4 

506.4 

507.4 

509.4 

510.4 

514.5 

516.5 

CFR 47 Parts 22, 74, 90, 95J, 90.210 

CFR 47 Parts 22, 74, 90, 95A, 90.210 

CFR 47 Parts 22, 90 

RSS-119 

EN300 086, EN300 113, EN301 489, EN60950 

AS/NZ54295 

Type approval FCC Industrie Canada NTIA 

25W 

30/35W 

40W 

VHF 

UHF 

UHF 

UHF 

CASTMAB1E 

CASTMAH5E 

CASTMAH6E 

CASTMAK5F 

CASTMAH5F 

CASTMAH7F 

737A–TMAB1E 

737A–TMAH5E 

737A–TMAH6E 

737A–TMAK5F 

n/a 

n/a 

Procedure 

25/30/35/50W 

Procedure 

110W 

© Tait Limited 2012. SM9135-270712.90 www.taitradio.com 

www.epigroupe.com 

2 

1, 2 

1, 2 

1 

1 

1, 3 

1 

1 

1 

1 

1, 6 

350-400MHz** 

380-420MHz** 

50W VHF CASTMAB1F n/a 136-174MHz** 

110W 

(ERFPA) 

Emission designators 

VHF CASTMAB1Z n/a 

Specifications are subject to change without 

notice and shall not form part of any contract. 


†Please note that not all frequency bands and 

power outputs are available in all markets. 

For further information please check with 

your nearest Tait office or authorized dealer. 

-75dB 

-65dB 

-80dB 

-70dB 

10K0F1D, 10K0F1E, 10K0F7D, 10K0F7E, 11K0F3E, 12K7F1D, 16K0F3E, 

6K60F2D, 7K70F1D, 8K10F1D, 8K10F1E, 8K10F7D, 8K10F7E, 

9K60F2D 

**Tait confirms that this product model 

conforms with NTIA requirements. 

***Receiver preamplifier installed. 

The word “Tait” and the Tait logo are 

trademarks of Tait Limited. Tait is an ISO 

9001: 2008 and ISO 14001: 2004 certified 

supplier. 

-75dB 

-65dB 

Spurious response rejection -75dB -90dB -70dB -75dB 

FM hum and noise 



-43dB 

-40dB 

-43dB 

-40dB 

-43dB 

-40dB 

Residual audio noise ratio 45dB 45dB 45dB 45dB 

Audio distortion @ rated audio (3W) 

Optional external speaker output 

3% @ 1kHz 60% modulation 

10W (into 4 ohm) 

2 

2 

2 

1 

– 

3 

– 

1 

1 

1 

6 

Authorized Partners 

-75dB 

-65dB 

-43dB 

-40dB 




Tel : +33 (0) 1 30 75 11 67 

Fax :+33 (0) 1 30 75 12 67 


Please note that this product does not 

offer encryption capability and there is no 

upgrade path for this. If encryption may 

be required Tait recommends the TM9155 

mobile radio.

TM9155 


Interoperable, 

flexible, 

configurable. 

With FIPS validated encryption, 

certified interoperability, digital audio 

clarity and superb build quality, the 

TM9155 is a tough, dependable and 

sophisticated mobile radio. 

key features 

}} 

Tested in a Department of Homeland Security-recognized P25 Compliance 

Assessment Program (P25 CAP) laboratory for interoperability and performance 

}} 

Radios can be used on analog, P25 conventional, trunked and simulcast networks 

}} 

FIPS 140-2 certified encryption 

}} 

Tested beyond MIL-STD-810 C, D, E and F 

}} 

A range of analog signaling features - MDC1200 encode/decode* 

and Two Tone decode with the purchase of software licenses** 

}} 

Comprehensive scanning features including P25 talk group, priority, dual priority 

and editable scanning 

}} 

High temperature display option optimizes screen visibility in hot environments. 

*MDC1200 decode includes calling identity display and inhibit/uninhibit functionality. 

**Software license option(s) available separately. 

© Tait Limited 2012. SM9155-270712.90

TM9155 


Encryption for secure 

communications 

AES encryption certified by the 

US National Institute of Standards 

and Technology (NIST) or proven 

DES encryption can be incorporated 

into the TM9155 for highly secure 

communications. 

These radios can be encrypted 

fast in-field with a Tait Key Fill 

Device (KFD) or via Over-the-air 

Rekeying (OTAR) with the Tait Key 

Management Facility (KMF). 

Flexible choices 

Optional dual head configuration 

means the TM9155 can dynamically 

respond to vehicle and user needs. 


The TM9155 is tested on other 

vendors’ networks as part of the P25 

Compliance Assessment Program 

(P25 CAP). 

This offers Public Safety and 

Government agencies a 

multi-vendor environment. 


transition 


investment and migrate to P25 

digital at your own pace. 


between various partner agencies. 

Configure to suit with software 

licenses 

Software licenses allow a solution 

that is readily extended as needs 

change, removing the risk of 

hardware upgrades and factory 

returns. 

Trunking, P25 CAI, encryption, 

location transmission/display*, 

Application Programming 

Interfaces (APIs) and OTAR are 

just some of the software license 

options available. 

*Please contact your local Tait 

representative for more information. 

Remote mounted standard control head. 

Dual head configuration with STN LCD 

for use in warmer climates. 

Dual head configuration with FSTN LCD 

for use in cooler climates (a Control Head 

Interface Box (CHIB) is requried). 

Tait P25 portables, mobiles and the 

hand-held control head all share the 

same intuitive interface. 

© Tait Limited 2012. SM9155-270712.90 

www.taitradio.com 


TM9155 


General 

Frequency ranges Frequency band† Transmit power Transmit current (typical) 

VHF 

UHF 

700/800MHz 


Channel/zones 

Talk groups 

Scan groups 

Power supply 


136–174MHz 

136–174MHz* 

136–174MHz 

350–400MHz* 

380-420MHz* 

400–470MHz 

400–470MHz 

450–530MHz 

450–520MHz 

Transmit 

762–776MHz 

792–825MHz 

850–870MHz 

Receive 

762–776MHz 

850–870MHz 



25W 

50W 

110W 

40W 

40W 

25W 

40W 

25W 

40W 

30W (806MHz) 



10.8–16VDC 

Frequency increment/channel steps 2.5/5/6.25 

Dimensions (DxWxH) control head 

Dimensions (DxWxH) radio body 

25W 

30/35/40/50W 

110W 

Weight control head 

Weight radio body 

25W 

30/35/40/50W 

110W 


Sealing 

RF connector 

Interface connectors 


Transmitter 

Output power 

25W 

30W 

35W 

40W 

50W 

110W 







12.5/15/20/25/30kHz 

1.38 x 7.24 x 2.8in (35 x 184 x 71mm) 

6.9 x 6.3 x 2.1in (175 x 160 x 52mm) 

7.7 x 6.3 x 2.1in (195 x 160 x 52mm) 

14.6 x 9.8 x 5in (370 x 250 x 121mm) 

11.6oz (330g) 

42.3oz (1,200g) 

49.4oz (1,400g) 

296oz (8,400g) 

-22ºF to 140ºF (-30ºC to 60ºC) 


50 ohm BNC or Mini UHF 

3 Interface connectors with serial ports 


TM9155 



Analog sensitivity 

12dB SINAD 

VHF/UHF 

0.28µV (-118dBm) 

VHF 50W 

0.315µV (-117dBm) 

VHF 110W 

0.25µV (-119dBm) 

700/800MHz 

0.28µV (-118dBm) 


5%BER 0.22µV (-120dBm) 0.233µV (-120dBm) 0.18µV (-122dBm)**** 0.18µV (-122dBm) 

Intermodulation rejection (TIA/EIA 102) -75dB -75dB -70dB -75dB 


25/30kHz channel (TIA/EIA 603a) 


-75dB 

-65dB 

-80dB 

-70dB 

© Tait Limited 2012. SM9155-270712.90 www.taitradio.com 


-75dB 

-65dB 

Spurious response rejection -75dB -90dB -70dB -75dB 

FM hum and noise 



-43dB 

-40dB 

-43dB 

-40dB 

-43dB 

-40dB 

Residual audio noise ratio 45dB 45dB 45dB 45dB 

Audio distortion @ rated audio (3W) 

Optional external speaker output 

MILITARY STANDARDS 810 C,D,E AND F 


Low pressure 





Rain 

Humidity 

Salt fog 

Dust 

Vibration 

Shock 


USA 

Canada 

Europe 


Type approval 

25W 

30/35W 

40W 

VHF 

UHF 

800MHz 

VHF 

UHF 

UHF 

UHF 






For further information please check with your 

nearest Tait office or authorized dealer. 

3% @ 1kHz 60% modulation 

10W (into 4 ohm) 

Method 

25/30/35/50/110W 

500.4 

501.4 

502.4 

503.4 

505.4 

506.4 

507.4 

509.4 

510.4 

514.5 

516.5 

CFR 47 Parts 22, 74, 90, 95J, 90.210 

CFR 47 Parts 22, 74, 90, 95A, 90.210 


RSS-119 

EN300 086, EN300 113, EN301 489, EN60950 

AS/NZ54295 

FCC 

CASTMAB1E 

CASTMAH5E 

CASTMAH6E 

CASTMAK5F 

CASTMAH5F 

CASTMAH7F 

Industrie 

Canada 

737A–TMAB1E 

737A–TMAH5E 

737A–TMAH6E 

737A–TMAK5F 

n/a 

n/a 

NTIA 

Procedure 

25/30/35/50W 

2 

1, 2 

1, 2 

1 

1 

1, 3 

1 

1 

1 

1 

1, 6 

350-400MHz*** 

380-420MHz*** 

50W VHF CASTMAB1F n/a 136-174MHz*** 

110W 

(ERFPA) 


VHF CASTMAB1Z n/a 


6K60F2D, 7K70F1D, 8K10F1D, 8K10F1E, 8K10F7D, 8K10F7E, 9K60F2D 

***Tait confirms that this product model 

conforms with NTIA requirements. 

****Receiver preamplifier installed. 

The word “Tait” and the Tait logo are 

trademarks of Tait Limited. Tait is an ISO 9001: 

2008 and ISO 14001: 2004 certified supplier. 

Procedure 

110W 

2 

2 

2 

1 

– 

3 

– 

1 

1 

1 

6 

-75dB 

-65dB 

-43dB 

-40dB 




Tel : +33 (0) 1 30 75 11 67 

Fax :+33 (0) 1 30 75 12 67 


FIPS logo is a Certification Mark of NIST, 

which does not imply product endorsement 

by NIST, the U.S. or Canadian Governments.

TP9135/40 


Tough, 

reliable and 

interoperable. 

TP9135/TP9140 portable radios provide affordable 

and reliable digital communications for Public Safety 

users who need exceptional audio clarity without 

provision for all possible features or configurations. 

key features 

}} 



}} 

Ease of operation: all user controls and menu functions are identical across all the Tait 

P25 portables, mobiles and hand-held control heads 

}} 

Tested beyond MIL-STD-810 C, D, E and F – Tait performs tougher drop tests, then 

performs ingress and other tests on the same radio 

}} 

Supports individual, group, broadcast and emergency calls 

}} 

Programmable power settings and intelligent batteries 

}} 

Emergency features for staff safety include Man Down and Lone Worker 

}} 

Advanced voting optimizes channel reception 

} } Comprehensive scanning features including P25 talk group, priority, dual priority and 

editable scanning. 

© Tait Limited 2012. SP9135-40-270712.90

TP9135/40 


Tait Tough Radio 

Reliable and durable TP9135/TP9140 

portable radios have been built to 

withstand the accidental knocks and 

the extremes of nature. 

Dual shot molding provides builtin 

shock absorption, while a 

unique and patented battery clasp 

mechanism eliminates threat of the 

battery dislodging when the radio is 

dropped. 

Tailored functionality 

This radio will provide the essential 

network performance required by 

Public Safety users. For more 

advanced functionality users should 

consider investing in the TP9155/60 

for long term flexibility. 


Genuine open standards ensure 

choice, value and responsiveness 

during routine operations or crises. 

Digital audio clarity 

Crystal clear digital audio allows 

precise communication even in 

noisy situations. 


transition to P25 digital 


investment and migrate to P25 at 

your own pace. 


between various partner agencies 

signaling options including MDC1200 

encode/decode and 

Two Tone decode.* 

*A separately enabled option. 

Above: A TP9140 with yellow front 

panel shown. 

More front panel colored options are 

available. Please contact your local Tait 


© Tait Limited 2012. SP9135-40-270712.90 


TP9135/40 


General 

Frequency ranges 

VHF 

UHF 

700/800MHz 


Channels/zones 

Talk groups 

Scan groups 

Dimensions (DxWxH) 

Weight 

(includes NiMH battery) 

(includes Li-Ion battery) 

Interfaces 


Frequency band† 

136–174MHz* 

380–420MHz* 

400–470MHz* 

450–530MHz 

Transmit 

762–776MHz 

792–825MHz 

851–870MHz 

±1.5ppm (22ºF to 140ºF/-30ºC to 60ºC) 



Receive 

762–776MHz 

851–870MHz 


1.9 x 2.6 x 6.6in (47 x 67 x 167mm) 

20.4oz (580g) 

16.4oz (480g) 

Frequency increment 2.5/5/6.25 


Sealing 

Rated audio 


Transmitter 

Four-line full dot matrix LCD 

12.5/15/20/25/30kHz 

-22ºF to 140ºF (-30ºC to 60ºC) 


>500mW 


VHF UHF 700/800MHz 

Output power 5W, 3W, 2W, 1W 4W, 2.5W, 2W, 1W 3W, 2.5W, 2W, 1W 



20kHz channel 




12.5/15kHz channel 

±5kHz 

±4kHz 

±2.5kHz 

-48dB 

-42dB 

-41dB 

-37dB 

-40dB 

-34dB 

Conducted emissions (typical) -75dBc -75dBc -70dBc 

Audio response (analog) 

12.5/15kHz 

25/30kHz 

Audio distortion (analog) 

Transmit attack time (TIA/EIA 102) 

Duty cycle 

300–2550Hz +1/-3dB 

300–3000Hz +1/-3dB 

TP9135/40 




12dB SINAD 

Battery 

Intelligent battery options 

Charger 

VHF/UHF 

0.28µV (-118dBm)z 

NiMH 2400mAh 

Li-Ion 2500mAh 

Battery shift life (NiMH/Li-Ion) >12 hours 5/5/90 

700/800MHz 

0.28µV (-118dBm) 


5%BER 0.22µV (-120dBm) 0.22µV (-120dBm) 

Intermodulation rejection (TIA/EIA 102) -78dB -78dB 


25/30kHz channel (TIA/EIA 603) 


-73dB 

-63dB 

-70dB 

-60dB 

Spurious response rejection -75dB -70dB 

Residual audio noise ratio (TIA/EIA 102) 45dB 45dB 

Audio distortion @ rated audio

TP9155/60 


Secure, 

dependable 

and flexible. 

With FIPS validated encryption, certified 

interoperability, digital audio clarity and superb build 

quality the TP9155/TP9160 are tough, dependable 

and sophisticated portable radios. 

The TP9155/TP9160 gives you the flexibility of 

working in digital, analog or auto-sensing dual mode. 

key features 

}} 

Tested in a Department of Homeland Security-recognized 

P25 Compliance Assessment Program (P25 CAP) laboratory 

for interoperability and performance 

}} 



}} 

Intrinsically safe option is available 

}} 

FIPS 140-2 certified encryption 

}} 

Tested beyond MIL-STD-810 C, D, E and F – Tait performs tougher drop tests, 

then performs ingress and other tests on the same radio 

}} 

Configurable emergency features - Man Down and Lone Worker as standard 

}} 

A range of analog signaling features - MDC1200 encode/decode* 

and Two Tone decode with the purchase of software licenses** 

}} 

Comprehensive scanning features including P25 talk group 

}} 

User interface is common with the Tait P25 mobiles for ease of use 

*MDC1200 decode includes calling identity display and inhibit/uninhibit functionality. 

**Software license option(s) available separately. 

© Tait Limited 2012. SP9155-60-270712.90

TP9155/60 


Encryption for secure 

communications 

AES encryption certified by the US 

National Institute of Standards and 

Technology (NIST) or proven DES 

encryption can be incorporated into 

the TP9155/TP9160 for highly secure 

communications. 

These radios can be encrypted fast 

in-field with the Tait Key Fill Device 

(KFD) or via Over-the-air 

Rekeying (OTAR) with the Tait 

Key Management Facility (KMF). 


The TP9155/TP9160 portable radios 

are tested on other 

vendors’ networks as part of the 

P25 Compliance Assessment 

Program (P25 CAP). 

This offers Public Safety and 

Government agencies a 

multi-vendor environment. 


transition 


investment and migrate to 

P25 digital at your own pace. 


between various partner agencies. 

Configure to suit with 

software licenses 

Software licenses allow a solution 

that is readily extended as needs 

change, removing the risk of 

hardware upgrades and factory 

returns. 

Trunking, P25 CAI, encryption, 

location transmission/display*, 

Application Programming Interfaces 

(APIs) and OTAR are just some of the 

software license options available. 

*Please contact your local Tait 


Comprehensive accessory suite 

Complement your public safety radio 

with high performance accessories 

and charging options that will allow 

frontline staff to spend more time on 

patrol. 

Being a manufacturer of digital and 

analog radios, base stations and network 

equipment means Tait has the solution 

focus to serve you better. 

Tait’s P25 portables, mobiles and the 

hand-held control head all share the same 

intuitive interface. 

© Tait Limited 2012. SP9155-60-270712.90 

www.taitradio.com 


TP9155/60 


GENERAL 

Frequency ranges 

VHF 

UHF 

700/800MHz 


Channels/zones 

Talk groups 

Scan groups 

Dimensions (DxWxH) 

Weight 

(includes NiMH battery) 

(includes Li-Ion battery) 

Interfaces 


Frequency band† 

136–174MHz*** 

380–420MHz*** 

400–470MHz*** 

450–530MHz 

Transmit 

762–776MHz 

792–825MHz 

851–870MHz 

±1.5ppm (22ºF to 140ºF/-30ºC to 60ºC) 



Receive 

762–776MHz 

851–870MHz 


1.9 x 2.6 x 6.6in (47 x 67 x 167mm) 

20.4oz (580g) 

16.4oz (480g) 

Frequency increment 2.5/5/6.25 


Sealing 

Rated audio 

Four-line full dot matrix LCD 

12.5/15/20/25/30kHz 

-22ºF to 140ºF (-30ºC to 60ºC) 


>500mW 

Analog signaling options MDC1200 encode/decode, Two Tone decode, PL (CTCSS), DPL (DCS) 

TRANSMITTER 

VHF UHF 700/800MHz 

Output power 5W, 3W, 2W, 1W 4W, 2.5W, 2W, 1W 3W, 2.5W, 2W, 1W 



20kHz channel 




12.5/15kHz channel 

±5kHz 

±4kHz 

±2.5kHz 

-48dB 

-42dB 

-41dB 

-37dB 

-40dB 

-34dB 

Conducted emissions (typical) -75dBc -75dBc -70dBc 

Audio response (analog) 

12.5/15kHz 

25/30kHz 

Audio distortion (analog) 

Transmit attack time (TIA/EIA 102) 

Duty cycle 

300–2550Hz +1/-3dB 

300–3000Hz +1/-3dB 

TP9155/60 




12dB SINAD 

Military Standards 810C, D, E and F 


Low pressure 





Rain 

Humidity 

Salt fog 

Dust 

Vibration 

Shock 

Battery 

Intelligent battery options 

Charger 

Charger options (NiMH, Li-Ion) 


USA 

Canada 

Europe 

VHF 

UHF 

800MHz 


Method 

500.4 

501.4 

502.4 

503.4 

505.4 

506.4 

507.4 

509.4 

510.4 

514.5 

516.5 

CFR 47 Parts 22, 74, 90, 90.210 

CFR 47 Parts 22, 74, 90, 95A, 90.210 


RSS-119 

EN300 086, EN300 113, EN301 489, EN60950-01 

A3/NZS4295 

Type approval FCC Industrie Canada NTIA 

VHF 

UHF 

800MHz 


CASTPAB1A 

CASTPAH5A 

CASTPAH6A 

CASTPAK5A 

ESD Standard IEC 61000-4-2 






For further information please check with your 

nearest Tait office or authorized dealer. 

VHF/UHF 

0.28µV (-118dBm) 

Battery shift life (NiMH/Li-Ion) >12 hours 5/5/90 

NiMH, Standard and Intrinsically Safe (IS) 2400mAh 

Li-Ion, Standard and Intrinsically Safe (IS)**** 2500mAh 

Fast desktop smart charger 

6-way multi charger 

Vehicle charger 

737A–TPAB1A 

737A–TPAH5A 

737A–TPAH6A 

737A–TPAK5A 

136-174MHz*** 

380-420MHz*** 

400-470MHz*** 


6K60FZD, 7K70F1D, 8K10F1D, 8K10F1E, 8K10F7D, 8K10F7E, 9K60F2D 

700/800MHz 

0.28µV (-118dBm) 


5%BER 0.22µV (-120dBm) 0.22µV (-120dBm) 

Intermodulation rejection (TIA/EIA 102) -78dB -78dB 


25/30kHz channel (TIA/EIA 603) 


-73dB 

-63dB 

Procedure 

2 

1, 2 

1, 2 

1 

1 

1, 3 

1 

1 

1 

1 

1, 4 

Authorized Partners 

FIPS logo is a Certification Mark of NIST, 

which does not imply product endorsement 

by NIST, the U.S. or Canadian Governments. 

© Tait Limited 2012. SP9155-60-270712.90 www.taitradio.com 


-70dB 

-60dB 

Spurious response rejection -75dB -70dB 

Residual audio noise ratio (TIA/EIA 102) 45dB 45dB 

Audio distortion @ rated audio

TB9100 


Intelligence, 

flexibility and 

high performance. 

The TB9100 base station is intelligent and 

flexible, offering dual mode to ease migration 

with seamless FM or P25 switching. 

The modular design combined with intuitive 

programming software make the Tait P25 

TB9100 base station an ideal solution for 

conventional, trunked and simulcast. 

key features 

}} 

Ideal for P25 trunked, simulcast and conventional networks 

}} 

Tested in a Department of Homeland Security-recognized P25 Compliance Assessment Program lab 

}} 

Supports P25 open standard DES and AES encryption 

}} 

Dual mode operation for ease of analog-to-digital migration 

}} 

Remote programming and software licenses reduce the need for site visits and hardware upgrades 

}} 

Smart AC/DC switching to ensure continuity of service 

}} 

Built-in test equipment provides self-monitoring with local and remote logging of alarms 

}} 

Digital console interfaces are provided for IP-connected consoles (DFSI for P25 conventional and 

CSSI for P25 trunked) 

}} 

An analog line interface (4-wire + E&M) allows connection to legacy analog consoles. 

© Tait Limited 2012. SB9100-180712.90

TB9100 


features 

Interoperable and versatile 

Fully P25-compliant, the TB9100 can 

be configured as a repeater 

or as a base station in a digital 

P25, analog FM or mixed-mode 

radio network. 

Totally flexible Task Manager 

Routines and code can be written 

quickly and easily allowing fast 

development and delivery of valueadding 

custom applications. 

Convenient Windows-based 

software programming 

Change over 150 parameters with 

intuitive drop downs, tick boxes 

and other easy-to-master software 

commands. Tait Customer Service 

Software makes the TB9100 easy to 

configure and upgrade. 

IP connection for ease 

of diagnostics 

No special equipment will be needed 

to ensure total control of your base 

station. Connect and configure alerts 

and alarms, monitor performance and 

administer the site remotely. 

Integrated VoIP networking 

with voting 

Network your TB9100s using VoIP 

with built-in centralized voting while 

eliminating hardware. 

Showing a small sub-routine written into the TB9100 task manager to deliver 

customized behavior for a specific situation. 

Comprehensive and intuitive software 

can be used to change configuration 

quickly and easily. 

Clean back panel design with industrystandard 

interface enables easy 

connectivity to the rest of the system 

and third party vendors. 

Pictured: Dual 50W systems with 

AC/DC Power Management Unit. 

Front-loading modules slip into 

the 4U subrack, making building 

the system, replacing a module or 

accessing a system interface board 

fast and simple. TB9100 modules 

include: 

}} 

Reciter - contains the receiver 

and exciter 

}} 

Power Amplifier - available as 5W, 

50W and 100W modules 

}} 

Power Management Unit - can 

be AC and/or DC powered, and 

includes an auxiliary 

power supply 

}} 

Network Board - provides access 

to multiple interfaces 

}} 

Subrack, front panel and 

control panel. 

© Tait Limited 2012. SB9100-180712.90 www.taitradio.com 


TB9100 


General 

Operational frequency+ 

Electronic switching range 

Channel/network capacity 255 


Channel increment 

Dimensions 

HxWxD (subrack only) 

HxWxD (including front panel) 

VHF 

136–174MHz 

UHF 

380–520MHz 

700/800MHz 

762–870MHz 

≥2% of the center frequency (e.g. 10MHz @ 500MHz) 

12.5kHz, 20kHz, 25kHz 

0.125kHz 

7in (177.8mm) x 19in (482.6mm) x 15.2in (386mm) 

7in (177.8mm) x 19in (482.6mm) x 16.1in (409mm) 

Weight (with AC and DC PMU) 

5/50W base station system (single channel) 

100W base station system 

47.0lb (21.5kg) 

50.2lb (22.8kg) 


-22ºF to 140ºF (-30ºC to 60ºC) 

Description 

Modular base station/Repeater/Receiver 



External Reference 

10MHz or 12.8MHz 

Power Consumption 

Standby 

Tx @ 5W 

Tx @ 50W 

Tx @ 100W 

12V PA 

0.81A 

2.2A 

9.2A 

- 

12V PMU 

1.2A 

2.7A 

10.0A 

19.2A 

24V PMU 

0.63A 

1.4A 

5.4A 

10.3A 

48V PMU 

0.3A 

0.65A 

2.6A 

4.9A 

110VAC 

- 

49VA 

138VA 

239VA 

240VAC 

- 

118VA 

177VA 

262VA 

Supply Requirements 

Mains 

DC 

88 to 264V (PFC Power Factor Correction) 

12V, 24V, 48V (Nominal +ve or -ve earth) 

Adjacent Channel Power 

Analog 20/25kHz 

Analog 12.5kHz 

Digital 12.5kHz 

TB9100 


Transmitter 

Modulation Limiting 


20kHz channel 

25kHz channel 

Modulation Fidelity 

Transmit Rise Time 

Transmitter Power Rating 

FM Hum and Noise 

12.5kHz and 20kHz channels 

25kHz channel 

Conducted/Radiated Emissions 

Emission Designators 

±2.5kHz 

±4kHz 

±5kHz

Tait Flyer P25 TM9100 Mobile Configurations - contact@epi-groupe ...

Create successful ePaper yourself

Delete template?

Save as template?