Performance

Bristol 0117 923 2523 Manchester 0161 480 6402 CLUTCH 25
ill. Part Number Price £ea. Description Req. Details ill. Part Number Price £ea. Description Req. Details
Diaphragm Clutches
1 GCK100AF £45.95 CLUTCH KIT 1 { contains items 2, 3
} and 4
2 GCP204AF £17.30 CLUTCH PLATE 1
GCP596 £89.95 CLUTCH PLATE, road rally 1
3 GCC103 £40.80 CLUTCH COVER, (diaphragm) 1
GCC481 £37.06 CLUTCH COVER, road rally 1
GCC482 £44.80 CLUTCH COVER, rally race 1
4 GRB238 £7.40 RELEASE BEARING 1
5 22A598 £Call PRESSURE PLATE 1
CAHT230 £117.95 PRESSURE PLATE 1 lightweight 3.56.lbs
6 2A3657 £2.45 SCREW 3 diaphragm to plate
7 GHF323 £0.10 WASHER, shake-proof 3
8 2A3658 £6.40 STRAP, driving 6 { road use or 9 for
} race/rally
9 2A3659 £2.15 SCREW, strap to flywheel 3
10 2A3512 £Call LOCKTAB, for above 3
11 GHF302 £0.18 WASHER 3
14 12G3014 £Call FLYWHEEL 1
CAEG619 £155.95 FLYWHEEL, steel 1 super light 8.38lbs
(For 107 tooth ring gear with inertia starter motor).
CAEG620 £Call FLYWHEEL, steel 1 super light 8.38lbs
(For 129 tooth ring gear with pre-engaged starter motor).
CAEG420 £149.95 FLYWHEEL, steel 1 light weight 11lbs
(For 129 tooth ring gear with pre-engaged starter motor).
15 12G676 £25.50 RING GEAR 1 wide type
(Standard manual transmission 107 tooth).
22G2613 £23.95 RING GEAR 1 thin type
(As used on race fly wheels 107 tooth).
16 88G508 £9.14 KEY, flywheel to crankshaft 1
17 22A747 £7.15 BOLT, flywheel 1
18 22A1155 £2.40 LOCKTAB, flywheel bolt 1
Verto Clutches
Note: Verto manufactured clutches were first used on the Metro range in 1983, to counter
problems with clutch judder and reliability. They were built as an assembly and dynamically
balanced to reduce these problems.
Although it is possible to purchase component parts, we only offer the assembly as it
promises less maintenance and reduces the risk of a juddering clutch.
DAM1955 £29.15 PLUNGER, clutch 1 floating fit 1979-84
Note: Always renew DAM2413 when replacing release bearing.
47 DAM2413 £1.96 RING, locking, plunger to bearing 1
48 DAM5353 £54.95 PLUNGER 1 Verto clutches
49 AAU2866 £1.90 ‘O’ RING, plunger to bearing 1 use with DAM5353
50 22A427 £8.75 STOP, plunger 1
51 NT610041 £0.50 NUT, plunger stop locking 1
52 22A2204 £12.20 LEVER, clutch release, long 1 diaphragm clutches
53 DAM5355Z £18.35 LEVER, clutch release, short 1 Verto clutches
54 CLZ628 £1.63 CLEVIS PIN, clutch pivot 1
55 GHF302 £0.18 WASHER 1
56 GHF502 £0.10 SPLIT PIN 1 For CLZ628
57 GHF101 £0.16 SCREW, clutch lever stop 1
58 JN2107 £0.16 LOCKNUT 1
59 CLZ518 £1.36 CLEVIS PIN 1
60 2A3601 £3.73 SPRING PLATE, lever end 1
61 GHF301 £0.10 WASHER 1
62 GHF502 £0.10 SPLIT PIN 1
63 1G5999 £3.40 SPRING, clutch arm return 1
64 2A3600 £Call SPRING PLATE, slave cylinder end 1
65 18G8086 £Call LOCK TAB SET 1
(This set contains all lock tabs required for re-assembly of
the flywheel housing, on later cars shouldered bolts are
used instead of studs, these replace the lock tabs as they
are self locking).
Note: Whenever work has been carried out on the clutch assembly or the flywheel has
been removed, its good practice to have the assembly balanced again before it’s
reinstalled. This will help achieve a smoother running engine. An out of balance flywheel
can cause a great deal of damage and shorten the life of the engine.
20 GCK149AF £134.95 CLUTCH ASSEMBLY 1 inertia starter
GCU90115AF £Call CLUTCH ASSEMBLY 1 pre-engaged starter
GCU90122AF £152.95 CLUTCH ASSEMBLY 1 { Cooper 1275cc
} and SE
GCU90121AF £Call CLUTCH ASSEMBLY 1 spi 1991-On
20a GCP90311AF £34.96 CLUTCH PLATE 1 998cc
GCP90832AF £91.94 CLUTCH PLATE, verto 1 1275cc
GCP596 £89.95 CLUTCH PLATE, road/rally 1
20b GCK149AF £134.95 CLUTCH KIT 1 998cc
(181mm centre plate, diaphragm and release bearing).
GCK149AFZ £114.95 CLUTCH KIT 1 1275cc
(190mm centre plate, diaphragm and release bearing).
21 GRB239 £6.07 RELEASE BEARING 1
22 AHU1564 £33.95 THRUST SLEEVE 1
23 DAM5922 £18.95 BOLT, with lock-washer 1
24 DAM5923 £34.96 KEY, crankshaft to fly wheel 1
25 DAM2821 £Call DUSTSHIELD, primary gear seal 1
26 12G2445 £27.00 RING GEAR, 107 teeth 1 inertia starter
PSF10003 £24.95 RING GEAR, 129 teeth 1 pre-engaged starter
(Verto or pre-Verto fly wheel with pre-engaged starter).
27 BAU2319 £0.76 BOLT, cover fixing 6
28 GHF323 £0.10 WASHER, cover fixing 6
29 13H7848 £7.60 BEARING, idler gear 1 1.065” OD-0.750” ID
DAM3745 £22.96 BEARING, idler gear 1 1.375” OD-0.750” ID
AHU1707 £12.85 BEARING, idler gear 1 1.375” OD-0.875” ID
30 AAU8424 £12.74 BEARING, 1st motion shaft spigot 1
31 2A3643 £6.68 SPRING RING, for bearing 1
33 13H2934 £2.15 OIL SEAL 1
LUF10005 £6.20 OIL SEAL, improved seal 1 standard 1991-On
34 AHU1106 £Call COVER, with timing hole 1
35 22A2237B £3.53 GASKET, housing to transmission 1
36 BH605141 £0.80 SCREW, housing to block 3 long
DAM7758 £Call BOLT, flanged, housing to block 3 long
GHF103 £0.25 SCREW, housing to block 3 short
38 FNZ505 £0.50 NUT, housing, stud from gearbox 9
39 GHF332 £0.16 WASHER, locking 9
41 DAM7755 £0.60 SCREW, cover to housing 7
42 GHF301 £0.10 WASHER, plain 1
GHF332 £0.16 WASHER, spring 1 use with DAM7755
43 22A1299 £Call PLATE, dowel retaining 1
46 22A180 £6.60 PLUNGER, clutch 1 press fit To 1979
For the latest prices, please visit www.moss-europe.co.uk