TROPEA & EVOLUT - Metrix
TROPEA & EVOLUT - Metrix
TROPEA & EVOLUT - Metrix
- No tags were found...
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>TROPEA</strong> & <strong>EVOLUT</strong><br />
inwall cisterns<br />
The more<br />
stars the more<br />
water efficient<br />
WELS<br />
The more<br />
stars the more<br />
water efficient<br />
WELS<br />
Apaiser Cea Dornbracht Duravit Gessi Glass-Design Inda Kaldewei Marblo Paini Rapsel Silfra Tubes Valsir Vola
Tropea Cistern<br />
Tropea Pneumatic Cistern<br />
Art. VS0866014 - 6/3 litre flush<br />
3 Star Wels Rating<br />
Art. VS0866914 – 6/3 litre flush<br />
Art. VS0866922 – 4.5/3 litre flush<br />
3 Star Wels Rating<br />
4 Star Wels Rating<br />
Art. VS0866022 - 4.5/3 litre flush<br />
4 Star Wels Rating<br />
This dual flush front push mechanical cistern fits inside a 90mm<br />
deep timber framed wall, and is designed to be used with wall<br />
hung pans or independent supply floor pans.<br />
With wall hung pans use the Art. 400 pan bracket. The minimum<br />
installation height to the top of the cistern is 1070mm. Allow a<br />
further 30mm for water connection.<br />
This cistern is preset 6/3 litre flush and can be adjusted up to<br />
7.5/4 litres.<br />
A 4.5/3 litre 4 Star Wels option is also available.<br />
Use code VS0866022.<br />
When using standard P.V.C. waste pipes through the floor, a larger<br />
150mm wall cavity may be required to accommodate them.<br />
The push panel is easily removed, providing full access into the<br />
cistern for servicing.<br />
Supplied with: Cistern fixings, isolator tap, ½” water connection,<br />
flushpipe & Kee seal.<br />
These cisterns are used in installations where there may not<br />
be room to fit the cistern behind the pan, e.g. under a low<br />
window, so the cistern is mounted elsewhere and flushed<br />
remotely with pneumatic buttons.<br />
In all installations, access to the cistern is still required for<br />
servicing and maintenance. This may be achieved by installing<br />
the cistern in the ceiling cavity, behind a removable mirror, or<br />
by rotating the cistern 180 degrees in the wall and accessing it<br />
from behind, perhaps through a wardrobe.<br />
A 4.5/3 litre 4 Star Wels option is also available.<br />
Use code VS0866922.<br />
The options here are endless and Inspection cover plates<br />
are available. The cistern can be set single or dual flush<br />
depending on the button selected. The plumber makes the<br />
extended flushpipe from P.V.C. fittings.<br />
Supplied with: Cistern fixings, isolator tap, ½” water<br />
connection, flushpipe & Kee seal, 2.5m of tubing (pair).<br />
Max pneumatic tubing length 2.5m.<br />
Max working pressure for all cistern is 5 bar (500 Kpa).<br />
Test pressure is 20 bar (2000 Kpa).<br />
Please check wall hung pan set out for correct installation height.<br />
Max Weight 250kg
Tropea 90mm Full Frame Cistern<br />
Art. VS0866319 - 6/3 litre flush<br />
Art. VS0866523 - 4.5/3 litre flush<br />
3 Star Wels Rating<br />
4 Star Wels Rating<br />
This dual flush front push mechanical cistern is pre-mounted<br />
inside a height adjustable, full steel frame designed to hang wall<br />
hung pans from (therefore no extra pan bracket is required).<br />
The minimum installation height to the top of the frame is 1150mm.<br />
This cistern is preset 6/3 litre flush and can be adjusted up to<br />
7.5/4 litres.<br />
A 4.5/3 litre 4 Star Wels option is also available.<br />
Use code VS0866523.<br />
The advantages of the fully framed option is all the pipework<br />
is pre-assembled, making for quick and simple installations,<br />
(Only 6 coach screws and connect the waste and inlet pipe).<br />
Included is a special outlet pipe and seal which enable the<br />
wastepipe to turn down through the floor inside 90mm,<br />
meaning the complete installation, including wastepipe, fits<br />
inside a standard 90mm wall cavity and then plugs into 100mm<br />
P.V.C. pipe.<br />
Supplied with: Frame fixings, isolator tap, ½” water connection,<br />
flushpipe & Kee seal, pan fixing kit incl. cover caps, S & P Pan<br />
connector set to fit inside 90mm.<br />
Max working pressure for all cistern is 5 bar (500 Kpa).<br />
Test pressure is 20 bar (2000 Kpa).<br />
Please check wall hung pan set out for correct installation height.<br />
Max Weight 250kg
Evolut Full Frame Cabinet Cistern<br />
Art. VS0864502 - 6/3 litre flush<br />
3 Star Wels Rating<br />
Evolut Cabinet Cistern<br />
Art. VS0864001 - 6/3 litre flush<br />
3 Star Wels Rating<br />
This 6/3 litre dual flush pneumatic cistern is pre-mounted inside<br />
a height adjustable, full steel frame,designed to hang wall hung<br />
pans from. (therefore no extra pan bracket is required).<br />
The Evolut can be installed as low as 820mm, making it<br />
suitable for installation inside vanities or under low windows.<br />
However the Evolut cistern requires a minimum wall cavity<br />
depth of 150mm.<br />
This cistern is preset 6/3 litre flush and can be adjusted up to<br />
7.5/4 litre.<br />
The push panel can be installed on the vanity top or the vanity<br />
front. These are only 145mm High x 215mm Wide, and are easily<br />
removed, providing full access into the cistern for servicing.<br />
The Evolut may also be flushed using remote pneumatic<br />
buttons, however access is still required into the cistern<br />
for servicing.<br />
Supplied with: Frame fixings, isolator tap, ½“ water connection,<br />
flushpipe & Kee seal, pan fixing kit incl. cover caps, S & P Pan<br />
connector set.<br />
The Evolut cistern is also available unframed, designed to be<br />
used with wall hung pans or independent supply floor pans.<br />
With wall hung pans use the Art. 400 pan bracket.<br />
The Evolut can be installed as low as 820mm, making it suitable<br />
for installation inside vanities or under low windows<br />
Supplied with Cistern fixings, isolator tap, ½” water connection,<br />
flushpipe and Kee seal.<br />
Water Inlet<br />
Max working pressure for all cistern is 5 bar (500 Kpa).<br />
Test pressure is 20 bar (2000 Kpa).<br />
Please check wall hung pan set out for correct installation height.<br />
Front Push Panel<br />
Top Push Panel<br />
Max Weight 400kg
<strong>TROPEA</strong> WHITE CHROME SATIN STAINLESS STEEL<br />
165<br />
ABS<br />
245<br />
VS0872501 VS0872535 VS0872537<br />
165<br />
METAL<br />
<strong>EVOLUT</strong><br />
VS0872701 VS0872735 VS0872737 VS0872741<br />
145<br />
ABS<br />
215<br />
REMOTE PNEUMATIC<br />
VS0872601 VS0872635 VS0872637<br />
46<br />
110<br />
54<br />
120<br />
ABS<br />
VS0873335<br />
VS0873337<br />
VS0873435<br />
VS0873437<br />
PNEUMATIC CISTERN PUSH PANEL<br />
<strong>TROPEA</strong> <strong>EVOLUT</strong> REMOTE PNEUMATIC<br />
INOX<br />
165<br />
145<br />
110<br />
5<br />
245<br />
215<br />
170<br />
CHROME VS0877901 VS0877905 VS0877931 VS0877935 VS0877961 VS0877965<br />
SATIN VS0877903 VS0877907 VS0877933 VS0877937 VS0877963 VS0877967<br />
ANTHRACITE<br />
14.5<br />
STONE<br />
CHROME VS0876601 VS0876605 VS0876801 VS0876805 --- ---<br />
SATIN VS0876603 VS0876607 VS0876803 VS0876807 --- ---<br />
RED<br />
8<br />
CHROME VS0877001 VS0877005 VS0877301 VS0877305 VS0877601 VS0877605<br />
SATIN VS0877003 VS0877007 VS0877303 VS0877307 VS0877603 VS0877607<br />
WHITE<br />
8<br />
GLASS<br />
CHROME VS0877031 VS0877035 VS0877331 VS0877335 VS0877631 VS0877635<br />
SATIN VS0877033 VS0877037 VS0877333 VS0877337 VS0877633 VS0877637<br />
BLACK<br />
8<br />
CHROME VS0877051 VS0877055 VS0877351 VS0877355 VS0877651 VS0877655<br />
SATIN VS0877053 VS0877057 VS0877353 VS0877357 VS0877653 VS0877657
VALSIR ARIA PUR BATHROOM VENTILATION SYSTEM<br />
Valsir Aria Pur is a unique bathroom ventilation system, combined with the Tropea wall hung cistern that simultaneously removes odours<br />
from the bathroom and the toilet pan itself, reducing the likelihood of any foul odours in the bathroom.<br />
The exhausted air is piped directly into the plumbing vent pipe, eliminating the need for further wall and/or roof penetrations. An internal<br />
non return flap prevents the return of odours and external noise into the bathroom. This system is ideal for windowless bathrooms and<br />
bathrooms centrally located in households.<br />
The simply designed fan can be wall or ceiling mounted. The attractive cover hides the grate and filter, and allows air to be drawn in around<br />
its edges. The fan removes 100m 3 air / hour and has a noise rating below 35db.<br />
The complete system includes the fan unit and a Tropea Inwall cistern with a special flushpipe with a side take-off enabling the plumber to<br />
pipe from this flushpipe to the fan unit in standard PVC pipes. The fan unit has a 5 minute timer and may be wired into the light switch or<br />
independently switched.<br />
This section is assembled by<br />
the plumber using standard<br />
PVC pipe and fittings.<br />
ELEMENTS THAT MAKE A DIFFERENCE<br />
• Air-removal up to 100 m3/h.<br />
• Noise level below 35 dB in compliance with<br />
requirements of D.P.C.M. 5/12/1997.<br />
• Centralised installation in high-rise buildings.<br />
• Prevents return of odours from the centralised<br />
inhalation duct.<br />
• Prevents the entrance of outside noises<br />
through the ventilation duct.<br />
• Wide choice of activating systems.<br />
• Clean and essential design for all rooms.<br />
• Simple installation and servicing.<br />
* Valsir products have 10 years limited warranty.<br />
Architectural Showrooms<br />
62 Apollo Dr, Mairangi Bay, Auckland. p 64 9 444 5656 f 64 9 444 5151<br />
155 The Strand, Parnell, Auckland. p 64 9 379 7399 f 64 9 379 7035<br />
www.metrix.co.nz<br />
email: info@metrix.co.nz