Multi Saw - Veterinary Instrumentation
Multi Saw - Veterinary Instrumentation
Multi Saw - Veterinary Instrumentation
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Chapter 5<br />
POWER TOOLS 5<br />
Electrical Power<br />
Synthes Quick Fit Adaptor - Jacobs<br />
Variable Speed Orthopaedic Drill<br />
Converts both small and large Jacobs chuck to take Synthes fit drills and<br />
taps. Adds 40mm length. Fits all chucks.<br />
SYNTHES QUICK FIT ADAPTOR<br />
001612 Synthes Quick Fit Adaptor - Jacobs £120.00<br />
Mini Re-chargeable Drill<br />
Our model has a removeable battery pack. This feature makes charging<br />
easier and a spare battery pack can be maintained on charge. The battery<br />
charges more quickly than you can discharge the one in the drill. This<br />
remains the best drill we have found.<br />
All the original features remain.<br />
• excellent control over speed 0-600rpm via trigger<br />
• stainless steel chuck (6.35mm capacity) and extension<br />
• 80mm through chuck cannulation<br />
• autoclavable shroud<br />
• low speed, high torque<br />
• supplied as a complete kit including stainless chuck, key, extension,<br />
autoclavable shroud, 2 batteries and a charger.<br />
VARIABLE SPEED ORTHOPAEDIC DRILL<br />
001600 Variable Speed Orthopaedic Drill (Complete Kit).<br />
Drill, chuck, key, shroud, extension, 2 x batteries £350.00<br />
001605 Spare Chuck (& key) 1/4" 6.35mm £120.00<br />
001606 Spare Key for standard chuck £22.50<br />
001607 Drill Extension £52.50<br />
001620 Spare Drill Shroud £17.50<br />
Spare Battery Pack<br />
Our standard orthopaedic drill can feel quite bulky when used in cats or<br />
with fine wires. Our mini drill fits in the palm of your hand and weighs only<br />
865 grams.<br />
Speed is variable via the trigger 0-600 rpm appropriate for drills and wires<br />
• forward and reverse key above the trigger<br />
• stainless steel chuck and key 4mm capacity with extension<br />
• 50mm through cannulation<br />
• supplied with two lithium ion batteries to ensure you are never left<br />
without a charged battery<br />
• supplied as a complete kit with two batteries, charger, stainless<br />
cannulated extension, 4mm chuck and key and waterproof shroud<br />
MINI RECHARGEABLE DRILL<br />
001660 Mini Rechargeable Drill complete kit £295.00<br />
001661a Waterproof Shroud £17.50<br />
001605S Spare chuck with key £120.00<br />
001662 Mini Drill Extension to fit 5/32” (4mm) chuck £52.50<br />
001666 Mini Drill Extension to fit 1/4” (6.3mm) chuck £52.50<br />
For use as standby or replacement. The quick charge unit supplied with<br />
the drill charges the spare battery pack faster than you can discharge the<br />
battery pack in the drill. With drills having a permanent integral battery,<br />
once the battery fails the drill must be replaced, but with this system you<br />
simply replace the battery.<br />
SPARE BATTERY PACK<br />
001610 Spare Rechargeable Battery £42.50<br />
101
5 POWER TOOLS<br />
Desoutter Cast Cutter<br />
Removal of casts without a power saw is extremely hard work and very<br />
time consuming. This has implications for procedure costs and anaesthetic<br />
risk. The Desoutter saw is extremely reliable and makes short work of all<br />
cast materials. (The harder synthetics require the diamond blade).<br />
DESOUTTER CAST CUTTER<br />
001700 Desoutter Cast Cutter CC4 £645.00<br />
001710 Spare Blade for Gypsum Casts 64cm £20.00<br />
001720 Diamond Blade for Resin Casts 64mm £90.00<br />
001721 Diamond Blade for Resin Casts 80mm £90.00<br />
<strong>Multi</strong> <strong>Saw</strong><br />
<strong>Multi</strong> <strong>Saw</strong> battery powered<br />
<strong>Multi</strong> <strong>Saw</strong> Variable Speed 240volt<br />
<strong>Multi</strong> <strong>Saw</strong> in use during a<br />
closing wedge TPLO<br />
operation<br />
The <strong>Multi</strong> <strong>Saw</strong> is a multi-function oscillating saw which may be used as a<br />
cast cutter and a surgical oscillating saw. The standard rechargeable saw<br />
is supplied as a kit including charger, battery and Diamond blade.<br />
Our stainless attachment converts the multi saw into a surgical saw in a<br />
similar fashion to our orthopaedic drill. With the converter and shroud in<br />
place, all exposed surfaces are sterile. Excellent for total femoral head and<br />
neck excision, TPLO by Tibial Wedge Osteotomy and TTA. A wide range<br />
of blades fit the multi saw. We recommend either the Desoutter S82 series<br />
or the Halls 5071 series. The latter offers a slimmer cut 0.8mm c.f. 1.2mm.<br />
MULTI SAW BATTERY POWERED<br />
001715 <strong>Multi</strong> <strong>Saw</strong> (rechargeable) including Diamond Blade £385.00<br />
001702 Stainless Converter (c/w spanner) £105.00<br />
001703 Waterproof shroud for <strong>Multi</strong> <strong>Saw</strong> £17.50<br />
001705 <strong>Multi</strong> <strong>Saw</strong> Diamond Blade £45.00<br />
001708 <strong>Multi</strong> <strong>Saw</strong> Surgical Kit incl converter, shroud,<br />
Diamond blade and S82-103 blade £485.00<br />
001701B Spare Battery for <strong>Multi</strong>saw £102.50<br />
The well established <strong>Multi</strong> <strong>Saw</strong> is also available in a mains powered (240v)<br />
version. This plug in version has the advantage of reliability of power and<br />
significantly the speed of the saw is variable allowing a slow start speed.<br />
The disadvantage is that a flex is not convenient and care should be taken<br />
to eliminate electrical hazards in theatre.<br />
The option of a slow speed is also an advantage when used as a cast saw.<br />
The surgical attachment and blades are common to both battery and<br />
mains powered saws.<br />
MULTISAW, VARIABLE SPEED MAINS POWERED 240V<br />
001711C <strong>Multi</strong> <strong>Saw</strong> including Diamond blade £395.00<br />
001711 <strong>Multi</strong> <strong>Saw</strong> Kit incl convertor, shroud<br />
Diamond blade and S82-103 blade £495.00<br />
001703MAINS Shroud for Corded <strong>Multi</strong> <strong>Saw</strong> £15.00<br />
Slocum Blade Adaptor<br />
This adaptor converts our standard <strong>Multi</strong> <strong>Saw</strong> into a radial/bi-radial blade<br />
driver. The mount is in fact the old Stryker triangular mount. Please bear in<br />
mind the following, once mounted the saw sits at right angles to the long<br />
axis of the saw c.f. standard Slocum type saws. Additionally the cut is less<br />
aggressive in that the oscillation is 4˚ rather than the 6˚ of standard saws.<br />
The cut will, therefore, be slower. Ideal as a budget alternative or as a<br />
back up to your air saw.<br />
MULTI SAW SLOCUM BLADE ADAPTOR<br />
001707 <strong>Multi</strong> <strong>Saw</strong> Slocum Blade Adaptor £105.00<br />
102
www.vetinst.com<br />
POWER TOOLS 5<br />
<strong>Multi</strong> <strong>Saw</strong> Blades<br />
Cast Blades<br />
CAST BLADES<br />
001705 Diamond <strong>Multi</strong> <strong>Saw</strong> Blade 63mm for resin casts £45.00<br />
Surgical Blades<br />
Other patterns available - phone for full list<br />
MULTI SAW BLADES<br />
CODE CUT THICKNESS LENGTH WIDTH PRICE<br />
S82-100 0.9mm 45mm 12mm £45.00<br />
S82-103 1.2mm 70mm 12mm £45.00<br />
S82-104 1.2mm 70mm 25mm £45.00<br />
SB5071-134 0.4mm 41mm 9.0mm £55.00<br />
SB5071-232 0.4mm 41mm 19.5mm £55.00<br />
SB5071-135 0.6mm 30mm 5.0mm £55.00<br />
SB5071-133 0.4mm 25mm 9.5mm £45.00<br />
SB073310 0.7mm 33mm 10.0mm £45.00<br />
All blades with a central hole bigger than 6mm will fit the <strong>Multi</strong> <strong>Saw</strong>.<br />
S82-100* †<br />
SB5071-134 † SB073310 †<br />
SB5071-133 †<br />
SB5071-135 †<br />
SB5071-232 †<br />
S82-103*<br />
S82-104*<br />
Actual Size Actual Size<br />
Actual Size<br />
Actual Size<br />
Actual Size<br />
Actual Size Actual Size<br />
Actual Size<br />
*Also fits desoutter M171/M172<br />
† Suitable for use with TTO <strong>Saw</strong>guide<br />
Guide to <strong>Saw</strong> Blades<br />
A <strong>Veterinary</strong> <strong>Instrumentation</strong> <strong>Saw</strong> Blade guide is now available. Either download from www.vetinst.com or request a paper copy with your next order.<br />
The guide includes blades for all major manufacturers including the VI power tool range, 3MS MiniDriver & MaxiDriver, Synthes, Halls, Linvatec,<br />
Zimmer and Desoutter.<br />
103
5 POWER TOOLS<br />
VI MiniDriver<br />
The MiniDriver Is Dead!! Long Live the MiniDriver!!<br />
3Ms Orthopaedic was sold to Linvatec who killed off the MiniDriver and<br />
the MaxiDriver as they competed with their own product range. The<br />
MiniDriver remains in widespread use and in many ways is the ideal<br />
small animal orthopaedic power system particularly when used with the<br />
Mark II saw. <strong>Veterinary</strong> <strong>Instrumentation</strong> is pleased to announce that we<br />
are having the entire MiniDriver range re-manufactured including the<br />
K220 which takes a larger blade than the original Mark I saw. In fact we<br />
have improved on some of the accessories. New MiniDriver sets are<br />
available from £2800. Some say the torque on the MiniDriver is too low.<br />
OK then buy the high torque chuck which more than triples the torque!<br />
MiniDriver Sets<br />
K111 Wire Driver<br />
Re-attachment of osteotomies or<br />
small bone fragments is often best<br />
achieved using ‘K’ or arthrodesis<br />
(‘A’) wires. Driving a long pin in a<br />
chuck often results in bending and<br />
kinking making driving difficult.<br />
Incrementally advancing the wire<br />
through a chuck is fiddly and time<br />
consuming. The wire driver allows<br />
the easy incremental advancement<br />
of the wire through the handpiece via the use of a clutch arrangement.<br />
K111 WIRE DRIVER<br />
K111VI Wire Driver 0.7/1.8mm £625.00<br />
K211 Pin Driver<br />
Similar to the wire driver in<br />
operation the pin driver has a<br />
larger capacity. 1.6 to 4mm.<br />
K211 PIN DRIVER<br />
K211VI K211 Pin Driver 1.6 to 4mm £775.00<br />
K120 Mark I Sagittal <strong>Saw</strong><br />
Illustrated above is the basic MiniDriver set comprising<br />
K200<br />
Handpiece Mark II<br />
K110<br />
4mm chuck<br />
K111<br />
Wire Driver<br />
K114B<br />
AO quick release chuck<br />
K120<br />
Sagittal <strong>Saw</strong> Mark I Push button release<br />
3MHOSEVI MiniDriver Hose<br />
Also available with the Mark II saw<br />
When purchased as a set the savings are considerable.<br />
MINIDRIVER SETS<br />
VIMDB1 MiniDriver Basic Set (inc Mk I saw) £3,450.00<br />
VIMDB2 MiniDriver Basic Set (inc MkII saw) £3,750.00<br />
K200 MiniDriver Handpiece<br />
Fully re-furbished to the new<br />
K200 standard, the handpiece<br />
is the centre of the modular<br />
system. Handpiece has forward<br />
and reverse button plus locking<br />
trigger. Power output with<br />
Medical Air @7bar input is 0.78<br />
Newton Meters. Speed variable<br />
0-1100rpm.<br />
K200 MiINIDRIVER HANDPIECE<br />
K200VI K200 Handpiece £2,300.00<br />
The K120 sagittal saw uses a push button mechanism for blade<br />
attachment. It is relatively widely available and less expensive than the<br />
more robust Mark II K220.<br />
K120 MARK I SAGITTAL SAW<br />
K120VI K120 Sagittal <strong>Saw</strong> Attachment £600.00<br />
K220 Mark II Sagittal <strong>Saw</strong><br />
The Mark II saw is more robust in construction than the K120 saw. Blade<br />
attachment is by use of a hex wrench. While this gave a more rigid<br />
attachment of the blade to the saw it was also the weak point of the<br />
attachment. We have re-engineered the blade holding mechanism to<br />
make it stronger and made the whole attachment from stainless steel.<br />
The Mark II saw drives a larger ranger of blades including longer ones<br />
up to 42mm useful in the TTO and TTA procedures. Much more<br />
expensive than the Mark I version.<br />
K220 MARK II SAGITTAL SAW<br />
K220VI K220 Mark II Sagittal <strong>Saw</strong> Attachment £975.00<br />
MiniDriver Hose<br />
The standard hose is a 3 meter long double hose which vents back at<br />
the wall gas outlet or the regulator. In the UK the standard drive gas is<br />
bottle sterile Medical Air delivered at 7bar (100psi). Elsewhere in the<br />
world Nitrogen may be used. The standard hose supplied is fitted with<br />
an MA7 gas probe (Medical Air @ 7bar) which prevents connection to<br />
other gases e.g. Oxygen.<br />
MINIDRIVER HOSE<br />
3MHOSEVI MiniDriver Hose £395.00<br />
3MHOSEVIUS MiniDriver Hose US Shreader £395.00<br />
104
www.vetinst.com<br />
POWER TOOLS 5<br />
K110 Small (4mm) Jacobs Chuck<br />
K220 Blades<br />
Other patterns available<br />
Both Jacobs chuck<br />
attachments are through<br />
cannulated for driving<br />
long pins. 4mm capacity<br />
with key.<br />
K110 SMALL (4MM) CHUCK<br />
K110VI K110 4mm Chuck Attachment £315.00<br />
K109 Large (6.25mm) Jacobs Chuck<br />
Both Jacobs chuck<br />
attachments are through<br />
cannulated for driving<br />
long pins. 6.25mm<br />
capacity with key.<br />
K109 LARGE (6.25MM) CHUCK<br />
K109VI K109 6.25mm Chuck Attachment £315.00<br />
K210 Hi Torque Large (6.25mm) Jacobs Chuck<br />
Using a the standard<br />
chucks the MiniDriver<br />
has a torque of 0.78<br />
Newton Meters, which<br />
makes heavy weather of<br />
driving large pins without<br />
pre-drilling. By adding a<br />
set of gears the chuck speed is reduced but the stall torque is increased<br />
to 2.8 Newton Meters ideal for driving pins.<br />
K210 HI TORQUE LARGE (6.25MM) CHUCK<br />
K210VI K210 Hi Torque 6.25mm Chuck Attachment £715.00<br />
K107VI & K108VI Keyless Chuck Attachment<br />
Actual Size Actual Size Actual Size Actual Size<br />
K220 BLADES<br />
CODE CUT THICKNESS LENGTH WIDTH PRICE<br />
K141 1.0mm 14.2mm 6.4mm £49.50<br />
K142 1.0mm 30.0mm 6.4mm £49.50<br />
K144 1.0mm 30.0mm 10.2mm £49.50<br />
K146 0.65mm 27.4mm 19.0mm £49.50<br />
K147 0.65mm 27.4mm 14.0mm £49.50<br />
K148 0.65mm 27.4mm 9.5mm £49.50<br />
K149 0.65mm 42.7mm 19.1mm £49.50<br />
K152 0.65mm 30.0mm 6.4mm £49.50<br />
K154 0.65mm 42.7mm 9.5mm £49.50<br />
K155 0.65mm 42.7mm 14.0mm £49.50<br />
K120 Blades<br />
K142<br />
K152<br />
K148<br />
K144<br />
K154<br />
K155<br />
Other patterns available - phone for full list<br />
Actual Size<br />
K123<br />
K133<br />
Chuck keys wear quickly, become lost and can be awkward to use in some<br />
situations. The keyless chuck, as are found on most DIY drills allow the<br />
surgeon to quickly switch drills and pins without a key. The distal part of<br />
the chuck is held using fingers and the chuck opened or closed by<br />
engaging the drill in either the forward or reverse drive respectively. The<br />
downside is that the chuck is slightly bulkier than the keyed equivalent.<br />
KCA032 & KCA063 KEYLESS CHUCK ATTACHMENTS<br />
K108VI Keyless Chuck Attachment 0.3-2mm £475.00<br />
K107VI Keyless Chuck Attachment 0.6-3 mm £475.00<br />
K114B AO Quick Release Attachment<br />
Many drills and taps are<br />
available with a quick<br />
release fitting, the most<br />
common of which is to<br />
the Synthes or AO<br />
standard. Drills may be<br />
changed quickly without the use of a chuck key. The original version was<br />
made from relatively soft aluminium. The re-manufactured K114B is<br />
made from stainless steel and is easier to use than the original.<br />
K114B AO QUICK RELEASE ATTACHMENT<br />
K114BVI K114B AO Quick Release Attachment £425.00<br />
Actual Size Actual Size<br />
K122<br />
K132<br />
K124<br />
K134<br />
K120 BLADES<br />
CODE CUT THICKNESS LENGTH WIDTH PRICE<br />
K121 1.0mm 15.1mm 6.4mm £49.50<br />
K122 1.0mm 31.0mm 6.4mm £49.50<br />
K123 1.0mm 15.1mm 10.4mm £49.50<br />
K124 1.0mm 31.0mm 10.4mm £49.50<br />
K125 1.0mm 15.1mm 16.5mm £49.50<br />
K131 0.7mm 15.1mm 6.4mm £49.50<br />
K132 0.7mm 31.0mm 6.4mm £49.50<br />
K133 0.7mm 15.1mm 10.4mm £49.50<br />
K134 0.7mm 31.0mm 10.4mm £49.50<br />
K135 0.7mm 15.1mm 16.5mm £49.50<br />
105
5 POWER TOOLS<br />
Maxi Driver Modular System<br />
The MaxiDriver remains the<br />
workhorse of very many human<br />
and veterinary orthopaedic<br />
units. It is extremely reliable and<br />
almost infinitely repairable. It’s<br />
robust construction will tolerate<br />
a good deal of abuse.<br />
<strong>Veterinary</strong> <strong>Instrumentation</strong> is remanufacturing<br />
the handpieces<br />
and attachments and has taken<br />
steps to ensure that all spares<br />
are available or can be re-made.<br />
The New MaxiDriver has a full 1<br />
MAXL100R<br />
year warranty. The handpiece is<br />
significantly bigger than the<br />
MiniDriver (940g vs 480g). The modular system takes 15 quick release<br />
attachments. All attachments also available in new re-manufactured<br />
condition. Please phone for details. A huge range of saw blades is<br />
available making the MaxiDriver Kit an extremely good value<br />
introduction to orthopaedic power. MaxiDriver Kits are particularly<br />
good value.<br />
Orthopaedic<br />
Equipment<br />
Desoutter is a long established U.K. company providing high quality air<br />
driven equipment for orthopaedic surgeons. Excellent equipment with high<br />
quality, local backup.<br />
MPZ Modular System<br />
This system is similar in size and feel to<br />
the Mini Driver. The range of available<br />
attachments is greater than the Mini Driver.<br />
The saw can take blades up to 44mm useable<br />
length. The pin driver attachment accepts pins<br />
up to 3.2mm (1/8”) which is very useful when<br />
placing external fixation pins.<br />
Air and corded versions are available.<br />
A full colour stand alone brochure is available which illustrates all the MPZ<br />
options, together with other De Soutter small bone equipment.<br />
Small Jacobs chuck<br />
Wrench tightening sagittal saw<br />
MAXKITR Basic MaxiDriver Set<br />
Quick release sagittal saw<br />
Wire driver<br />
MAXL110 Jacobs Chuck<br />
MAXL320 Sagittal <strong>Saw</strong><br />
MAXL513 AO Quick Release<br />
AO Quick release chuck<br />
MAXL111 Wire/Pin Driver<br />
MAXI DRIVER MODULAR SYSTEM<br />
MAXL100R MaxiDriver Handpiece Refurbished to new £2,300.00<br />
MAXL110 Jacobs Chuck Attachment 6.35mm capacity £295.00<br />
MAXL111 Wire/Pin Driver 1.6 to 4mm capacity £425.00<br />
MAXL320 Sagittal <strong>Saw</strong> Large Attachment £475.00<br />
MAXL140 Reciprocating <strong>Saw</strong> Attachment £375.00<br />
MAXL513 AO Quick Release Attachment £475.00<br />
MAXIHOSE 3 Metre MA7 Hose to fit MaxiDriver £395.00<br />
MAXKITR MaxiDriver Basic Kit with as new handpiece £3,500.00<br />
MPZ MODULAR SYSTEM<br />
MPZ226414 <strong>Multi</strong>drive MPZ Handpiece £3,450.00<br />
MPZ14110 Small Jacobs Chuck attachment max 4.0mm £525.00<br />
MPZ14240 Large Jacobs Chuck attachment max 6.3mm £550.00<br />
MPZ14140 AO attachment £575.00<br />
MPZ14230 Sagittal <strong>Saw</strong> Attachment (quick release) £1,950.00<br />
MPZ14210 Sagittal <strong>Saw</strong> Attachment (wrench fitting) £1,725.00<br />
MPZ14220 Reciprocating <strong>Saw</strong> Attachment £1,725.00<br />
MPZ14260 Wire Driver Attachment 0.6 to 1.8mm Gold Nose £1,575.00<br />
MPZ14270 Pin Driver Attachment 1.8 to 3.2mm Silver Nose £1,575.00<br />
MPZ10900 3 metre hose MA7 fitting £525.00<br />
BRDESOUTSM Small Bone Surgery Brochure £FOC<br />
BRDESOUTLB Large Bone Surgery Brochure £FOC<br />
106
www.vetinst.com<br />
POWER TOOLS 5<br />
MPZ Blades for Sag <strong>Saw</strong> with Wrench 14210(SZ-450)<br />
MPX Blades for Sag <strong>Saw</strong> with Wrench 12300(MX-600)<br />
MPX 600 Modular System<br />
Many other blade styles are available<br />
phone for all profiles<br />
S85-103<br />
S85-100<br />
S85-110<br />
S85-117<br />
Heavier duty than the MPZ system, the<br />
MPX will be of particular interest to those<br />
surgeons with a high through put of<br />
Closing Wedge TPLOs and TTOs. The<br />
working blade length goes up to 100mm.<br />
High power, high torque coaxial motor.<br />
A massive 27 quick release attachments,<br />
including 3 different saws which take all the<br />
blades styles illustrated on this page.<br />
Air, battery and corded versions available.<br />
Air hose is the same as the Slocum saw. KX-600<br />
Full colour stand alone brochure is<br />
available which illustrates all the MPX<br />
options together with other De Soutter<br />
NX-600<br />
large bone equipment.<br />
MPZ/MPX BLADES TO FIT WRENCH FITTING SAG SAW SZ-450/NX-600<br />
CODE CUT THICKNESS LENGTH WIDTH PRICE<br />
S85-100 0.7mm 23mm 10.4mm £47.50<br />
S85-103 0.7mm 11mm 6.4mm £47.50<br />
S85-107 0.7mm 44mm 19mm £47.50<br />
S85-109 0.7mm 44mm 17mm £47.50<br />
S85-110 0.7mm 33mm 10mm £47.50<br />
S85-117 0.7mm 48mm 17mm £47.50<br />
MPZ Blades for Quick Release Sag <strong>Saw</strong> 14230(NZ-450)<br />
MPX Blades for Quick Release Sag <strong>Saw</strong> 144400(NX-600)<br />
Many other blade styles are available<br />
phone for all profiles<br />
S88-103<br />
MPX-600 MODULAR SYSTEM<br />
MPX226464 MPX Handpiece £3,625.00<br />
MPX11720 Jacobs Chuck 4mm cap £695.00<br />
MPX11710 Jacobs Chuck 6.35mm cap £695.00<br />
MPX11930 Wire Pin Driver 0.6 to 3.2mm £1,950.00<br />
MPX12380 MPX Sagittal <strong>Saw</strong> Large Blade Head KX-600 £1,725.00<br />
MPX14400 Mini Sagittal <strong>Saw</strong> Quick Release Head NX-600 £1,725.00<br />
MPX12300 Mini Sagittal <strong>Saw</strong> Wrench Fit MX-600 £1,850.00<br />
MPX11730 AO Quick Release Attachment £575.00<br />
MPX11760 Oscillating Drill £1,550.00<br />
MPX5300 3 Metre MA7 Hose to fit MPX & Slocum <strong>Saw</strong> £375.00<br />
BRRDLBS Large Bone Surgery Brochure £FOC<br />
MPX Blades for Large Quick Release Sag <strong>Saw</strong> KX-600<br />
Many other blade styles are available<br />
phone for all profiles<br />
S87-109<br />
S88-100<br />
S87-103<br />
S88-110<br />
S87-108<br />
S88-109<br />
MPZ/MPX BLADES TO FIT QUICK RELEASE SMALL SAG SAW NZ-450/NX-600<br />
CODE CUT THICKNESS LENGTH WIDTH PRICE<br />
S88-100 0.6mm 25mm 10.0mm £47.50<br />
S88-103 0.6mm 22mm 6.4mm £47.50<br />
S88-109 0.6mm 46mm 15mm £47.50<br />
S88-110 0.6mm 35mm 10mm £47.50<br />
MPX BLADES TO FIT LARGE QUICK RELEASE SAG SAW 12380(KX-600)<br />
CODE CUT THICKNESS LENGTH WIDTH PRICE<br />
S87-103 0.8mm 60mm 13mm £47.50<br />
S87-108 0.75mm 52mm 20mm £47.50<br />
S87-109 0.8mm 32mm 12mm £47.50<br />
107
5 POWER TOOLS<br />
Blue Line Battery Surgical Power<br />
The Blue Line Drill is fully<br />
autoclavable at 134 degrees. (not<br />
batteries). The batteries are no<br />
memory Lithium for long life.<br />
Supplied with a quick fit 1/4”<br />
(6.3mm) stainless chuck. An AO<br />
quick fit attachment may be coupled<br />
to the drill’s industry standard<br />
hudson drive. Fully cannulated.<br />
Supplied complete with battery,<br />
battery charger and battery transfer<br />
sleeve.<br />
Weight 1110g<br />
The Blue Line <strong>Saw</strong> accepts a range<br />
of blades from 6mm wide. <strong>Saw</strong><br />
speed is nicely controlled via the<br />
trigger.<br />
The saw has a maximum oscillation<br />
of 15000/min. Noise levels are<br />
below 90dB.<br />
Supplied complete with battery<br />
charger and battery transfer sleeve.<br />
Weight 905g<br />
Drill/<strong>Saw</strong> Set<br />
Blue Line Drill<br />
Blue Line <strong>Saw</strong><br />
Jacobs Chuck<br />
AO Quick Release Chuck<br />
2 x Battery Chargers<br />
3 x Batteries<br />
2 x Battery Sleeves<br />
12 month Warranty<br />
Instructions<br />
The system is CE marked and carries a full 12 month warranty. The<br />
batteries should not be autoclaved but an autoclaveable transfer system is<br />
included.<br />
SPECIAL OFFER<br />
Buy both Drill/<strong>Saw</strong> set and save over £500.00.<br />
Drill/<strong>Saw</strong> Set £2,750.00<br />
Less than the price of the battery charger of<br />
other systems!!!<br />
BLUE LINE BATTERY POWER<br />
BLDKIT Blue Line Drill Complete Kit £1,650.00<br />
BLAOA AO quick fit attachment £115.00<br />
BLSSKIT Blue Line Sagittal <strong>Saw</strong> £1,650.00<br />
BLDSSET Blue Line Drill/<strong>Saw</strong> Full set £2,750.00<br />
BLBAT Spare Battery £175.00<br />
BLBH Spare Battery Exchange Device £15.00<br />
BL841008 <strong>Saw</strong> Blade 84mm x 10 x 0.8mm £32.50<br />
BL840808 <strong>Saw</strong> Blade 84mm x 8 x 0.8mm £32.50<br />
BL840608 <strong>Saw</strong> Blade 84mm x 6 x 0.8mm £32.50<br />
BL540906 <strong>Saw</strong> Blade 54mm x 9 x 0.6mm £32.50<br />
BL622912 <strong>Saw</strong> Blade 62mm x 29 x 1.2mm £32.50<br />
Mini Blue Line Battery Surgical Power<br />
The standard Blue<br />
Line drill and saw<br />
have proved very<br />
popular since the<br />
launch last year.<br />
There has been<br />
demand for a smaller<br />
system for smaller<br />
procedures and<br />
smaller hands. We<br />
are pleased to add the<br />
Mini Blue Line system<br />
in 2011. Manufactured<br />
by the same company<br />
as the larger system<br />
the Mini Blue Line<br />
offers the same<br />
reliability and build<br />
quality but<br />
significantly less<br />
weight 530g<br />
compared to 950g of<br />
the Blue Line.<br />
Chuck capacity is the<br />
same as the small jacobs chuck at 4.0mm and is fully cannulated.<br />
Both drill and saw are available seperately or together as a set at a special<br />
price. The smaller battery is not inter-changeable with the larger Blue Line<br />
system.<br />
The system is CE marked with full 12 month warranty.<br />
MINI BLUE LINE BATTERY POWER<br />
BLMINIDKIT Mini Blue Line Drill Complete Kit £3,500.00<br />
BLMINISSKIT Mini Blue Line Sagittal <strong>Saw</strong> Kit £3,500.00<br />
BLMINIDSSET Mini Blue Line Drill/<strong>Saw</strong> Full Set £5,950.00<br />
BLMINIBAT Spare Battery £350.00<br />
BLMINIBH Spare Battery Exchange Device £15.00<br />
BLMINI221006 <strong>Saw</strong> Blade 22mm x 10 x 0.6mm £47.50<br />
BLMINI321006 <strong>Saw</strong> Blade 32mm x 10 x 0.6mm £47.50<br />
BLMINI451506 <strong>Saw</strong> Blade 45mm x 15 x 0.6mm £47.50<br />
Synthes<br />
Special Offer<br />
Buy both Drill/<strong>Saw</strong> Set<br />
and save over £1,000<br />
Jacobs Chuck (4mm) with Synthes Quick Release<br />
Attachment<br />
The small Jacobs stainless chuck is fitted with the<br />
standard Synthes quick release attachment. This chuck<br />
will now fit the 511 series of Synthes drill allowing it to drive<br />
round shaft drills as well as pins and wires. It will also fit all Sythes tap<br />
handles making it a useful hand driver.<br />
4MM JACOBS CHUCK WITH SYNTHES QUICK RELEASE ATTACHMENT<br />
SYN4MM 4mm Chuck with Synthes quick release fitting £145.00<br />
108
www.vetinst.com<br />
POWER TOOLS 5<br />
V.I. AIR POWER<br />
<strong>Veterinary</strong> <strong>Instrumentation</strong> is pleased to be able to offer a full<br />
range of air driven small bone surgery tools. They are based on<br />
the well known Halls range and all take a standard Halls hose.<br />
High Speed Drill<br />
Reciprocating <strong>Saw</strong><br />
Speed variable 100-90,000rpm At high speed the bur becomes partially<br />
self cleaning. Bone debris is thrown off.<br />
Accepts all spine and HP burs. Always use a bur guard (not included).<br />
Twist locking system<br />
This bur system is the same as the Surgairtome.<br />
VI HIGH SPEED DRILL<br />
VIHSD VI high Speed Drill £1675.00<br />
Medium Speed Drill<br />
100-18,000 cuts per minute<br />
Accepts both flat and round shank saws with finger grip tightening<br />
Used for small osteotomies. May also used to make radial cuts in the<br />
proximal tibia for the TPLO procedure and cTTA procedure.<br />
VI RECIPROCATING SAW<br />
VIRCPS VI Reciprocating <strong>Saw</strong> £1,650.00<br />
Reciprocating <strong>Saw</strong> Blades<br />
5053-021<br />
S22-059M<br />
RECIPROCATING SAW BLADES<br />
CODE CUT THICKNESS LENGTH WIDTH PRICE<br />
5053-021 0.6mm 39mm N/A £47.50<br />
S22-059M 0.6mm 60mm N/A £47.50<br />
The medium speeed drill has vey similar styling to the above. The maximum<br />
speed is 25,000rpm delivered at a higher torque where more aggressive<br />
debridement is required. Always use a bur guard (not included).<br />
VI MEDIUM SPEED DRILL<br />
VIMSD VI Medium Speed Drill £1350.00<br />
TPLO <strong>Saw</strong><br />
Bur Guards<br />
VI BUR GUARDS<br />
Sagittal <strong>Saw</strong><br />
Burs should not be driven without a burguard<br />
which supports the shaft of the bur. Without<br />
bur guards burs vibrate and can bend causing<br />
injury to both patient and surgeon.<br />
The shortest guard available is the medium for<br />
burs 45-51mm long<br />
VIMBG Medium Bur Guard for Burs 45-51mm long £275.00<br />
VILBG Long Bur Guard for Burs 70mm long £300.00<br />
VIXBG Extra Long Bur Guard for Burs 95mm long £325.00<br />
Speed 100-18,000 cuts per minute. Ideal for precise small osteotomies.<br />
Accepts a wide range of flat and angled blades includes wrench.<br />
VI SAGITTAL SAW<br />
VISS Sagittal <strong>Saw</strong> includes Wrench £1750.00<br />
Blades<br />
Many patterns available please phone or email for details<br />
This is the same saw as the Whittemore which we have sold for many<br />
years with a very good record of reliability. Has the standard triangular<br />
drive for TPLO saw blades.<br />
See Chapter 1, Page 25 for TPLO starter kit.<br />
VI TPLO SAW<br />
TPLOSW VI TPLO <strong>Saw</strong> £2250.00<br />
VI Wire Driver<br />
Considered by many to be the best<br />
wire driver available this design functions<br />
using a single two stage trigger. Most other<br />
drivers require the use of an extra lever which<br />
needs to be adjusted for each size of wire.<br />
The first stage pull on the trigger ‘grabs’ the<br />
wire. The second pull on the trigger engages<br />
the drive. Now automatically grabs wire<br />
0.7mm to 2.00mm. Also has forward and<br />
reverse facility. Supplied with wire guard and<br />
wire brush.<br />
VI WIRE DRIVER<br />
VIWD VI Wire Driver £3350.00<br />
VI HOSE FITS ALL MOTORS ON THIS PAGE<br />
HALLHOSEVI VI Hose, Halls fitting £395.00<br />
109
5 POWER TOOLS<br />
Bur Systems<br />
Halls (Linvatec)<br />
Spinal Bur System<br />
Surgairtome II<br />
Electric Flexidrive Bur System<br />
This is the current replacement for the Minos A200. Available both<br />
new and pre-owned. Similar performance to the Minos but has an air<br />
brake, so the bur stops immediately the trigger is released. Not as robust<br />
as the Minos as the drive is through gears but preferred by some surgeons<br />
e.g. Simon Wheeler.<br />
SURGAIRTOME II<br />
505800 Surgairtome II kit. Includes hose,<br />
medium bur guard, motor and case £4,650.00<br />
5058 Surgairtome motor. £3,600.00<br />
PREHALLSSURG Pre-owned Surgairtome II kit.<br />
Includes hose and bur guard £2,150.00<br />
5042-35E Halls UK Hose MA-7 £625.00<br />
HALLHOSEVI VI Hose – Halls Fitting £395.00<br />
3M Spinal Bur System<br />
Minos A200<br />
A dedicated bur system, the<br />
Minos A200 drives a large range<br />
of burs at up to 100,000 rpm.<br />
This is the top line instrument in<br />
use at most universities and<br />
referral practices. Robustly built<br />
and easy to repair, the bur is<br />
driven by an air vane. Always use<br />
an appropriate length bur guard to protect the bur and operator. No longer<br />
available from 3Ms, <strong>Veterinary</strong> <strong>Instrumentation</strong> has this item built from<br />
scratch by an ex 3Ms engineer. We have improved the design in one or two<br />
areas. Further details and trials are available on request. A set will include<br />
the A200 motor, bur guard and a hose. Full 12 months warranty.<br />
MINOS A200<br />
MINOSA200<br />
Minos A200 kit.<br />
Includes motor, hose & bur guard £2,150.00<br />
3MHOSEVI Hose with 3M fitting. £395.00<br />
For the occasional spinal surgeon, this budget system performs very well.<br />
The burs run at 0 - 15,000 rpm controlled via a foot pedal and the flexidrive<br />
is easy to use. Now supplied with removable, autoclavable handpiece. Use<br />
sterile autoclavable film to shroud the flexible shaft. Supplied as a complete<br />
kit including burs and instructions. When you are cutting more than one<br />
back per month think about a Minos/Surgairtome.<br />
ELECTRIC FLEXIDRIVE BUR SYSTEM<br />
001640A Mini Drill (Electric Drive) 15,000 rpm<br />
Foredom full kit incl burs £575.00<br />
D235A Spare Handpiece £90.00<br />
D295051/2 Spare Inner Drive Flex £44.50<br />
D295051/3 Spare Outer Drive Flex £44.50<br />
001641 Collet for HP burs £11.00<br />
001785 1.6mm Round Short Carbide Bur £6.00<br />
HP8 2.3mm Round Short Carbide Bur £3.75<br />
001787 2.7mm Round Short Carbide Bur £8.50<br />
001784 6.0mm Round Short Carbide Bur £17.00<br />
Bur Brush<br />
Bur Guards<br />
Burs and bur guards are common to both<br />
the Minos and the Surgairtome II. A bur<br />
guard should always be used when<br />
driving burs. Spinning at 100,000 rpm the<br />
shaft needs support.<br />
BUR GUARDS<br />
1375-023 Extra Long Bur Guard £595.00<br />
1375-011 Long Bur Guard £425.00<br />
1375-012 Medium Bur Guard £425.00<br />
When burs stop cutting mid procedure the reason is usually clogging of the<br />
cutting flutes. High speeds (100,000 rpm) minimise the problem. Dremel<br />
type flexdrive units are particularly prone. Our bur brush is used to clean<br />
the bur without damaging it. It may be more convenient to change the bur<br />
and clean them up afterwards.<br />
BRUSH<br />
A315 Bur Brush £23.50<br />
110
www.vetinst.com<br />
POWER TOOLS 5<br />
Burs<br />
All surgical burs have a 2.36mm shank (HP fitting) and will fit in all high speed surgical bur machines e.g. 3M's Minos, Halls Surgairtome, Foredom. We<br />
have selected Komet burs for their high quality. All are single pack and non sterile. In human surgery burs are regarded as disposable items. In veterinary<br />
surgery the cost precludes using burs as disposables. However, use of burs which are less than sharp extends procedure time and creates heat. We do<br />
advise that burs are checked and changed on a regular basis.<br />
Diamond burs are sharper and create less heat that carbide equivalents. Adequate irrigation is essential. Please see chart for options and prices.<br />
BURS<br />
BUR TYPE<br />
illustrations are actual size<br />
ORDER<br />
ORDER<br />
HEAD OVERALL BUR CODE PRICE CODE PRICE<br />
SIZE LENGTH GUARD (Carbide) £ (Diamond) £<br />
1.8 50mm Medium M18R £28.50 - -<br />
2.0 50mm Medium M20R £28.50 M20D £77.50<br />
2.3 50mm Medium M23R £28.50 - -<br />
3.0 50mm Medium M30R £28.50 M30D £80.00<br />
4.0 50mm Medium M40R £57.50 M40D £80.00<br />
5.0 50mm Medium M50R £57.50 - -<br />
6.0 50mm Medium M60R £57.50 M60D £80.00<br />
1.8 72mm Long L18R £35.00 - -<br />
2.0 72mm Long L20R £35.00 L20D £47.50<br />
3.0 70mm Long L30R £44.50 L30D £47.50<br />
4.0 69mm Long L40R £44.50 L40D £50.00<br />
5.0 69mm Long L50R £62.50 L50D £67.50<br />
6.0 69mm Long L60R £65.00 L60D £80.00<br />
6.5 69mm Long L65R £67.50 - -<br />
2.0 95mm Extra Long X20R £49.50 X20D £57.50<br />
2.3 95mm Extra Long X23R £49.50 X23D £57.50<br />
3.0 95mm Extra Long X30R £49.50 X30D £57.50<br />
4.0 95mm Extra Long X40R £67.50 X40D £85.00<br />
Bur Stands<br />
5.0 95mm Extra Long X50R £75.00 X50D £85.00<br />
Bur Block x 6<br />
Bur Block x 10 Bur Block Split Level<br />
BUR BLOCKS HP BURS (2.36MM SHAFT)<br />
BUR6 Basic Bur Block for 6 burs £25.00<br />
BUR10 Bur Block for 10 burs £34.50<br />
BURSP12 Bur Block Split Level for 12 burs £49.50<br />
BURRACK Bur Rack Flip Out for 12 burs £72.50<br />
BURROT Bur Rack Rotating for 24 burs £225.00<br />
111<br />
Bur Rack Flip Out<br />
(NB Bur stands do not include burs)<br />
Bur Rack Rotate folded flat for autoclaving<br />
Bur Rack Rotate rotated out for use.
5 POWER TOOLS<br />
Aesculap Motor Systems by B Braun<br />
Acculan Ti Modular System<br />
Aesculap TPLO <strong>Saw</strong> Blades<br />
Aesculap TPLO<br />
blades are, as you<br />
would expect,<br />
engineered to<br />
very high<br />
standards and<br />
have a number of<br />
important<br />
features.<br />
Aesculap is known world wide for its quality and reliability. The Acculan<br />
3Ti is their latest battery driven modular system which meets the highest<br />
standards of reliability, durability and ergonomics. The body is machined<br />
from Titanium for light weight and durability.<br />
All standard attachments are available including: drill, oscillating saw,<br />
AO quick fit & wire driver. The wire driver takes all pins up to 4.0mm and<br />
the Acculan 3Ti has the power to drive 4.0mm pins.<br />
AESCULAP ACCULAN MODULAR SYSTEM<br />
GA671 Handpiece £4,925.00<br />
GA666 Battery £575.00<br />
GA677 Charger £3,150.00<br />
GA638R Drill Attachment £1025.00<br />
GA660R Oscillating <strong>Saw</strong> Attachment £1,750.00<br />
GA635R AO Quick Fit Attachment £995.00<br />
BRAESPOW Aesculap Power System Brochure £FOC<br />
BRAESPBURBLA Aesculap Burs and Blades Brochure £FOC<br />
• Blade is slightly thicker at the cutting edge<br />
which reduces friction and heat at the<br />
level of the blade body.<br />
• Cutouts in the blade body further reduce<br />
heat generated by friction, the single<br />
biggest problem associated with TPLO.<br />
• The blade is designed to be resharpened<br />
by laser twice<br />
• Available in 18, 20, 24, 27 and 30mm<br />
• TPLO blade template available printed<br />
onto a clear acetate. The blade profile is a<br />
useful planning aid for radial cut TPLOs.<br />
AESCULAP TPLO SAW BLADES<br />
GC544R Aesculap Radial <strong>Saw</strong> Blade 18mm £255.00<br />
GC545R Aesculap Radial <strong>Saw</strong> Blade 20mm £255.00<br />
GC546R Aesculap Radial <strong>Saw</strong> Blade 24mm £260.00<br />
GC547R Aesculap Radial <strong>Saw</strong> Blade 27mm £270.00<br />
GC548R Aesculap Radial <strong>Saw</strong> Blade 30mm £270.00<br />
GCTEM TPLO Blade Template £FOC<br />
Aesculap Sharpening service<br />
Aesculap TPLO Motor System<br />
LASER<br />
SHARPENED<br />
HAND<br />
SHARPENED<br />
For maximum efficiency saw blades must be sharp, this is particularly true<br />
of radial and biradial blades which are inherently inefficient. It is not<br />
possible to sharpen a blade by hand to the same degree of sharpness as a<br />
computer controlled laser cutter. See above pictures.<br />
Blunt blades are the biggest source of TPLO complication through thermal<br />
necrosis.<br />
TPLO BLADE SHARPENING SERVICE<br />
TPLOSHARPA Aesculap TPLO Blade sharpening £105.00<br />
TPLOSHARPS Slocum TPLO Blade sharpening £115.00<br />
The heart of this system is the tried and tested Aesculap air motor. The<br />
motor will drive other attachments such as drills and oscillating saws<br />
making this TPLO saw part of a truly modular system. Aesculap radial<br />
blades are driven by the TPLO saw attachment.<br />
AESCULAP TPLO MOTOR SYSTEM<br />
GA200 Air Motor £1,925.00<br />
GB124R TPLO <strong>Saw</strong> Attachment £1050.00<br />
GA468 MA7 Aesculap Air Hose £825.00<br />
Aesculap Power Lubricants - Sterilit<br />
This is the especially formulated lubricant<br />
for all Aesculap power tools.<br />
AESCULAP STERILIT SPRAY<br />
GB600 Aesculap Sterilit Spray (300ml) £57.50<br />
112
www.vetinst.com<br />
POWER TOOLS 5<br />
TPLO <strong>Saw</strong>s and Blades<br />
Modular Stainless TPLO Blades<br />
Slocum TPLO blades create a patented biradial cut which means that the<br />
tibial plateau segment fits the distal tibia section exactly with maximum<br />
bone contact. While this is a good thing the design of the blade does not<br />
cut very efficiently and needs regular hand sharpening if excess heat is not<br />
to be produced. <strong>Veterinary</strong> <strong>Instrumentation</strong> has been looking at TPLO<br />
blades for a number of years and is introducing a range of Radial blades<br />
which cut better and are cheaper to replace than the Slocum original. They<br />
have the same triangular stryker connection.<br />
TPLO SAWS AND BLADES<br />
TPLOSW TPLO <strong>Saw</strong> £2,250.00<br />
HALLHOSEVI VI Hose – Halls Fitting £395.00<br />
TPLO <strong>Saw</strong> Blades VI Pattern<br />
We have sold TPLO<br />
saw blades from<br />
various<br />
manufacturers over<br />
the years but have<br />
always thought that<br />
none of them cut as<br />
well as they should.<br />
In addition some of<br />
the blade lengths<br />
available did not<br />
match the clinical<br />
requirement. We<br />
have, therefore,<br />
designed our own.<br />
Currently available blades either have no ‘set’ or a one sided ‘set’. The ‘set’<br />
of a saw is the way that alternate teeth protrude outside the blade of the<br />
saw. The set, which is found on all woodworking and metal working saws,<br />
is there to create a slot in the material, wood, metal or bone, which is<br />
slightly larger than the blade so that the blade does not produce friction in<br />
the slot. Friction creates heat which although not serious in either wood or<br />
metal is very serious in bone. Thermal necrosis along the saw cut of TPLO<br />
osteotomies is a common cause of delayed union and failure. In addition to<br />
heat, friction leads to jamming of the blade in the slot which is both<br />
frustrating and destructive. VI TPLO blades have a full bilateral set for<br />
maximum efficiency.<br />
Blade length varies from 35mm in the 15mm blade to 65mm in the 30mm<br />
blade as requested by leading surgeons.<br />
A re-sharpening service is available and encouraged on a service<br />
exchange basis.<br />
TPLO BLADES VI PATTERN<br />
TPLOV115 TPLO Blades VI Pattern 15mm, 35mm length £225.00<br />
TPLOV118 TPLO Blades VI Pattern 18mm, 40mm length £230.00<br />
TPLOV121 TPLO Blades VI Pattern 21mm, 45mm length £235.00<br />
TPLOV124 TPLO Blades VI Pattern 24mm, 50mm length £240.00<br />
TPLOV127 TPLO Blades VI Pattern 27mm, 60mm length £245.00<br />
TPLOV130 TPLO Blades VI Pattern 30mm, 65mm length £250.00<br />
TPLOV155 Sharpening Service - Exchange basis £95.00<br />
For further information regarding the TPLO starter kit see page 25<br />
All the blades fit the standard hub. The 30mm blade requires a collar which<br />
is supplied with the hub. The blades have a ‘set’ which makes the teeth<br />
slighter wider at the tips which reduces friction and heat as the blade<br />
passes through the bone.<br />
For those who purchased our stainless steel hub system taking semi<br />
disposable radial cut blades we are pleased to inform you that in addition<br />
to the 24mm blade, 18 and 30mm blades are now available. The blades<br />
are long lasting with a tooth ‘set’ to reduce heat generation. When they get<br />
dull simply fit a new one.<br />
MODULAR STAINLESS TPLO SAW BLADES<br />
TPLOBHUB Hub for 18, 24 & 30mm blades includes collar £395.00<br />
TPLOB18 18mm Radial cut stainless blade £125.00<br />
TPLOB24 24mm Radial cut stainless blade £125.00<br />
TPLOB30 30mm Radial cut stainless blade £125.00<br />
TPLOB30COL Collar for 30mm blade £125.00<br />
TBHEX32 3.2mm ‘T’ Bar Hex Driver (Whittemore/VI) £35.00<br />
TPLO Radial <strong>Saw</strong> Blades<br />
We are now able to supply<br />
radial cut blades in the<br />
following sizes: 15, 18, 21,<br />
24, 27, & 30mm.<br />
Mandrels are available for the following sizes: 15, 18 & 24, 21 & 27 and 30mm.<br />
The theoretical benefits of a bi-radial blade are well known. However, in<br />
practice the bi-radial blade is not very efficient at cutting bone even when new.<br />
After hand sharpening the efficiency falls still further. An inefficient blade<br />
creates heat. The thermal necrosis produced by the bi-radial blade neutralises<br />
any benefit derived from the bi-radial cut.<br />
Our titanium blades are light, thin, hard and replaceable. In addition the blades<br />
have a ’set’ (the teeth are alternately offset as in all wood cutting saws) which<br />
creates a slot slightly wider than the blade. This reduces the friction and heat<br />
still further as well as preventing the blade jamming in the osteotomy. When<br />
the blade becomes worn simply replace with new sharp blade.<br />
RADIAL CUT TPLO BLADES<br />
TPMDRL15 Mandrel for 15mm Blades £295.00<br />
TPMDRL1824 Mandrel for 18 & 24mm Blades £295.00<br />
TPMDRL2127 Mandrel for 21 & 27mm Blades £295.00<br />
TPMDRL30 Mandrel for 30mm Blades £295.00<br />
TPBL15 15mm Blade £175.00<br />
TPBL18 18mm Blade £175.00<br />
TPBL21 21mm Blade £175.00<br />
TPBL24 24mm Blade £175.00<br />
TPBL27 27mm Blade £175.00<br />
TPBL30 30mm Blade £175.00<br />
113
5 POWER TOOLS<br />
TPLO <strong>Saw</strong> Hex Driver ‘T’ Bar type<br />
Air Regulators and Hose Probes<br />
The fitting on most TPLO saw blades is<br />
of the triangular Stryker type. The<br />
means of attachment to the saw is by<br />
hex drive grub screws which are<br />
notorious for working loose. Our ‘T’ bar<br />
hex drivers allow the surgeon to quicky,<br />
easily and firmly attach the blade to the<br />
saw.<br />
Available in 2.5mm (Slocum), 3.0mm (Aesculap) and 3.2mm Whittemore.<br />
‘T’ BAR HEX DRIVERS<br />
TBHEX25 2.5mm ‘T’ Bar Hex Driver (Slocum) £35.00<br />
TBHEX30 3.0mm ‘T’ Bar Hex Driver (Aesculap) £35.00<br />
TBHEX32 3.2mm ‘T’ Bar Hex Driver (Whittemore/VI) £35.00<br />
TPLO <strong>Saw</strong> Blade Protractor<br />
notch UK MA7 US Schrader<br />
Use to accurately measure the tibial plateau slope. In addition the<br />
protractor is marked with blade outline to further assist in the planning of<br />
the TPLO procedure.<br />
TPLO PROTRACTOR<br />
TPLOPRO TPLO Protractor £23.00<br />
Slocum Flat Blade Convertor<br />
001770<br />
Blade not included<br />
Allows any saw with a Slocum type drive to drive flat blades<br />
Huge range of blades available<br />
Friction grip allows infinite range of blade angles<br />
Use for osteotomies, wedge TPLOs, TTO, TTA.<br />
SLOCUM FLAT BLADE CONVERTOR<br />
001770 Slocum Flat Blade Convertor £97.50<br />
All the air equipment runs on Medical Air at 7 Bar (100PSI) Drills and saws<br />
can be run from compressors as their air requirement is intermittent. High<br />
speed drills need bottled gas or a big compressor. A twin dial regulator is<br />
best to control gas pressure (001756). One dial gives bottle pressure, the<br />
other one gives line pressure (7 Bar).<br />
UK supplied hoses come with an MA7 probe (Medical Air 7 Bar pressure).<br />
Schrader fittings on hoses purchased from the USA look similar to UK MA7<br />
probes. Many will however not lock into UK MA7 sockets. The best<br />
solution is to change the probe. A cheaper alternative is to use a<br />
Schrader/MA7 adaptor (001758).<br />
AIR REGULATORS AND HOSE PROBES<br />
001756 Medical Air Regulator MA7 outlet * £335.00<br />
001758 Schrader / MA7 Convertor (plug in) £65.00<br />
001759 Hose conversion US Schrader to UK Probe P.O.A.<br />
Carriage is extra for all items marked *<br />
Air Instrument Care Products<br />
Orthopaedic Air instruments are<br />
expensive to buy and replace.<br />
Regular basic maintenance will<br />
ensure continuing excellent<br />
performance and minimal repair<br />
bills. Many instruments which<br />
come to us for repair have simply<br />
not been lubricated. Follow<br />
manufacturer's recommendations<br />
exactly.<br />
AIR INSTRUMENT CARE PRODUCTS<br />
M105 Blitz Spray Cleaner £22.00<br />
M317 Lubricant for Minidriver and Minos £18.50<br />
M316 VI Air Instrument Oil £9.75<br />
114
www.vetinst.com<br />
POWER TOOLS 5<br />
Pre-Owned Equipment<br />
Quality pre-owned equipment typically costs a fraction of new. Buying<br />
second hand is often the only way to justify the purchase of capital<br />
equipment for orthopaedics and arthroscopy.<br />
Equipment may be purchased from Ebay or other auction houses but<br />
carries signficant risk. There is usually a reason why the previous owner is<br />
selling. We carefully source quality brands, check for function and service<br />
and repair as necessary. Everything comes with a six month warranty.<br />
Typically we keep stocks of orthopaedic power tools, xenon lights,<br />
cameras and shavers. The stocks change daily but details are to be<br />
found on www.vetinst.com in the web shop. Alternatively please telephone<br />
or e-mail with your requirements and we will advise and source what you<br />
need.<br />
+44 (0) 114 2588530 info@vetinst.com<br />
DyonicsSingle Chip Camera and Light Source<br />
MaxiDriver3 Modular System<br />
The MaxiDriver Mk 3 was the final version of this industry standard air<br />
system before 3Ms were taken over by Linvatec and the MaxiDriver was<br />
killed off. The preowned price is only 25% of original list<br />
The Maxi 3 is a lovely system to work with, which we support<br />
wholeheartedly. The attachments are particularly easy to switch. The<br />
system comes with a 12 month warranty as if it was new. Amazing value<br />
compared with new equipment.<br />
Weight of the handpiece is 1065g .<br />
Set includes: Handpiece, Jacobs Chuck, Keyless Chuck, Sagittal <strong>Saw</strong>, AO<br />
Chuck, Reciprocating <strong>Saw</strong>, Pin/Wire Driver, Hose and Case.<br />
Sagittal <strong>Saw</strong> takes the standard range of MaxiDriver blades.<br />
Servicing is not a problem.<br />
MAXIDRIVER3 MODULAR SYSTEM<br />
PREMAXI3SET MaxiDriver3 Set (Pre-owned) £3,250.00<br />
MicroDriver Modular System<br />
Linvatec Shaver System<br />
Used Air Equipment<br />
We maintain a large stock of used air equipment which John Lapish has<br />
personally selected for condition. Everything carries a 6 month warranty.<br />
Loan items are usually available. The stock list varies from day to day so<br />
please telephone to ask for our current stock list.<br />
All items available on a sale or return basis so that you can trial<br />
before you buy.<br />
Usually available - Mini Driver, Maxi Driver (Larger version of Mini Driver)<br />
Desoutter MPZ and MPX<br />
Halls Drills & <strong>Saw</strong>s<br />
Surgairtome II<br />
Minos<br />
The 3Ms MicroDriver modular system is designed for precise control when<br />
cutting and drilling small delicate bone. The kit is complete and includes<br />
the following:<br />
U100 Micro-Driver Motor<br />
U200 Drill/Bur: Takes standard spine burs. Runs at 0-28,000rpm<br />
U300 Sagittal <strong>Saw</strong>: Drives a range of small blades<br />
U500 Oscillating <strong>Saw</strong>: Drives a range of small blades<br />
U700 Reciprocating <strong>Saw</strong>: Drives a range of small blades<br />
Hose: MA7 (UK hose) and a selection of blades<br />
This system is as new and includes the standard 12 month warranty.<br />
Was originally £8,000.00 plus !!!<br />
MICRODRIVER MODULAR SYSTEM<br />
PREMICROFULL MicroDriver Set (Pre-owned) £2,400.00<br />
Check the pre-owned section<br />
of www.vetinst.com<br />
for latest offers<br />
115