ENIGMA Programming - Primayer

Quick Reference Guide
IXD-700-QR Issue 1
Enigma ® - Programming
1
From the PC run the Enigma
software by clicking on the
desktop Icon or programs menu
2
These two buttons are the
logger Programming and
Readback buttons
(The Enigma case lid must be
closed when Programming or
Reading back loggers via the
software.)
3
Ensure the USB communications
cable is connected. Click on the
Program button which will
produce the following progress
box
The screen should indicate that it
has found all the loggers in the case
and give any relevant warnings
A Q U A T E C H N O L O G Y S O L U T I O N S
4
5
The Programming wizard will
appear and is usually set for the
default use of Timed Logging
(overnight) as shown
The settings shown are those
recommended by Primayer and
used by many users
Click on Program
Continued on reverse side
Primayer

Quick Reference Guide
Enigma ® - Programming continued
6
The Programming wizard indicates the loggers
it has found and successfully programmed
The status screen indicates that the loggers are
waiting to record leak noise data
7
The loggers have been successfully
programmed and are ready for deployment
Primayer Limited
Primayer House, Parklands Business Park
Denmead, Hampshire PO7 6XP, United Kingdom
Tel: +44 (0)2392 252228 Fax: +44 (0)2392 252235
Email: sales@primayer.com Internet: www.primayer.com
A Q U A T E C H N O L O G Y S O L U T I O N S Certificate GB05/63731
Registered in England No. 2959100 at above address