Blacksmith Metalsmith Knifemaker Farrier Blacksmith ... - Pieh Tool

FARRIER FORGES
Forgemaster Companion
Forgemaster Farrier
Forgemaster E-1
Forgemaster Excalibur
Pro-Forge
Farrier Propane Forges
Forgemaster
Standard features on all Forgemaster furnaces include an extra long 9' fuel hose; fully assembled
UL listed regulator and gauge; convenient spark ignitor assembly; heavy cast iron burners permanently
welded to top housing, full 11/4" thick molded hearth brick bolted in place. All units are fitted for
propane, buy may be configured for natural gas.
Item # Weight
10000 Companion, Single Burner 45 lb
Open front. Heating chamber dimensions: Width: 8”, Diameter: 7”, Height: 2-2/3”. Designed for
modifying pre-made shoes, the single burner unit is small, lightweight and efficient. Convenient for
farriers to take to the barn for final fittings.
20000 Farrier, Double Burner 76 lb
Perfect for horseshoers who work with both hand-made and keg shoes. The front opening is large
enough to handle draft or saddle-horseshoes with toe clips.
30000 E-1, Single Burner 81 lb
Single burner with a front port on door and tool rest. Heating chamber dimensions: Width: 13”,
Diameter: 8-1/2”, Height: 3”. This fuel efficient forge has closed sides to pack the heat into a larger
heat chamber using less gas. The E-1 features one port in the tight fitting door and an adjustable
tool rest for added convenience.
40000 Excalibur, Single Burner 76 lb
Front and rear ports and self-closing door. Heating chamber dimensions: Width: 11”, Diameter:
8-1/2”, Height: 3”. The self-closing door with front and rear ports to the heat chamber make this an
ideal forge for many jobs involving large bar material. This one-burner, compact forge combines the
performance of the four larger models with the efficiency of the more compact units.
Accessories for Forgemaster are with the Blacksmith Forge Accessories, on page 69.
Cliff Carroll Pro-Forge
Item # Weight
PF-200 Pro-Forge, Twin Interchange Jets 60 lb
The propane Pro-Forge, known worldwide to shoers, is rugged in construction and will withstand
wear and tear. It operates with a clean fast heat that is easy to weld without sacrificing fuel
efficiency. This forge has a bar stock port on the left end, cast iron doors that do not warp, and a
hassle free ignition system with twin interchange jets that realign instantly after cleaning. It also has
hearth plates you can change right through the front door. A barstock support and welding plate is
available making the forge more versatile.
Time for first heat of the day: 4 minutes.
Normal Heats (depending on shoe size): 2-1/2 to 3-1/2 minutes.
Working Pressure: Average 7-10psi;
Welding Pressure: 10-12 psi
Temperature: 2450 degrees Fahrenheit at 7 lbs.; higher temps at higher pressures.
Outside Case Dimensions Firebox Depth Door Opening
wide high length high long high
15” 17-1/2” 16” 8” 12” 3-1/2”
PR-201 Pro-Forge Reliner Kit 18 lb
Includes firebox, soft door, cushion, gasket and hearth plate
PF-223 Welding Brick, 6 x 6 “ 3 lb
Mankel
Item # Weight
MOE2+4115P Mankel, Horseshoers, Open End +4 85 lb
2 burners, 115 volt blower
This is Mankel's oldest model-since 1976. The forge should be used to heat your material and then
shut down. The bottom and top are lined with 2800 degree insulation material that reflects the heat
right now. The front and side lips are made of the refractory material. This lining should give you
two or more years of life. Three versatile side openings allow larger pieces to be heated in the
forge. This forge can be used to weld bar shoes and even make knife blades. Forge is fabricated of
formed steel. It is tough-will take just about any abuse. It is also extremely easy to repair. Supplied with:
Manifold, complete with orifices, Blower with switch, Regulator with pressure gauge 8 ft hose.
Outside Case Dimensions Opening (with ends in)
wide high deep wide deep
17-1/2” 19” 17” 13” 2”
Mankel Horseshoers
86 1-888-743-4866 Pieh Tool Company, Inc.