Blacksmith Metalsmith Knifemaker Farrier Blacksmith ... - Pieh Tool

COAL FORGES, FIREPOTS, BLOWERS
#1219, #1204, #PTC1203
Blowers
More
Johnson
Blowers
Available
by Special
Lorance Fire Pot
Order
Pieh Tool Coal Forge with Hood
Coal/Coke Forges
Pieh Legacy Collection
Item # Weight
PTCF Pieh Forge Frame 120 lb
Heavy duty 3/16” fabricated steel hearth. Hearth Size: 24x30x3“.
PTCF-WP Pieh Coal or Coke Forge 181 lb
with Firepot and Tuyere
Same as above but includes Lorance Firepot, Clinker and Tuyere.
PTCF-WH Pieh Coal or Coke Forge 193 lb
with Firepot, Tuyere and Hood
Same as above but also includes a 24” Hood.
PTCF-WB Pieh Coal/Coke Forge 205 lb
with Firepot, Blower, Tuyere, Air gate
The same forge as above but includes our PTC1203 blower and air
gate. No hood.
PTCF-WBH Pieh Coal/Coke Forge 230 lb
w/ Hood, Firepot, Blower, Tuyere, Air gate
The same forge as above but includes our PTC1203 blower and air gate
and hood.
PTHD Pieh 24” Half Hood, Steel 12 lb
Base Width: 24“, Depth: 14”; Height: 26“, Flue: 8” Diameter; 21 gauge.
*(Oversized Shipping)
Firepot
RLPOT Roger Lorance Coal/Coke Fire Pot 50 lb
(Clinker unattached; Drilling holes costs extra)
Cast Iron, 14 x 11-1/2 x 11-3/8 x 8-7/8”, Depth: 3-7/8; Outside Bowl
Diameter at Hearth: 9-1/2” x 12”. Heavy enough to burn coke.
Tuyere
Pieh Legacy Collection
TA Tuyere with Ash Dump 11 lb
2” Inlet, 4” Outlet
Our tuyere is made from a 1/4” standard cold rolled steel welded T
with a welded flange.
Tuyere and Dump
Full Blast Gate
Disclaimer: We are not
responsible for any damages to
your health in relation to your
use of these lining products.
Wear protective clothing and
respiratory protection.
Blast Gates (Air Gates)
AG2 2” Sheet Metal Frame with Aluminum Gate
AG3 3” Sheet Metal Frame with Aluminum Gate
Used to control the air between one or more blowers and forges. Blast
gates maximize system efficiency. Allow to switch between blowers
such as a hand crank blower. Has a locking knob.
Electric Blowers
Johnson
Item # Weight
BA0100013 #1218 Blower with flange mount 8 lb
BA0100014 #/1219 Blower (1218 blower with shutter) 8 lb
Housing: Cast Aluminum; RPM: 11,000; WCP: 26 CFM at 4” W.C.;
Outlet: 1”; Motor: 1/3 hp, 115 Volt, Single Phase Brush Style;
Shutter is optional (#1219).
BA0100002 #1203 Blower - High Volume 28 lb
Housing: Cast Aluminum; RPM: 3,450; WCP: 50 CFM at 4” W.C.; Outlet:
1-1/2”; Motor: Continuous, 1/3 hp, 115 Volt, Single Phase. (Baldor motor)
Pieh Legacy Collection/Johnson
Johnson Gas blowers are sturdy, dependable, balanced and
with a reputation for efficient delivery of constant air pressure
and quiet operation.
PTC1203 Pieh #1203 Blower, High Volume 25 lb
The Pieh Legacy Collection high volume coal/coke forge blower is
specially built for Pieh Tool by Johnson Gas Co. It features the sturdy
#1203 aluminum blower housing used on Johnson’s industrial furnaces.
Our blower is ready to use! It includes wired power cord and on/off
switch & mounting plate with bolts. The air gate shutter provides quick
control of air flow eliminating the need for a rheostat, which can shorten
the life of a motor significantly. Enjoy years of forging satisfaction with
a Pieh Tool Blower! Our coal/coke forge is built stock with this blower. 1
year warranty. Specifications for Blower: 50 CFM at 4 in. W.C. Delivery
Outlet: 1-1/2” threaded. For Motor: Dayton, Flange Mount, Capacitor
Start, Continuous Duty, 400-600k BTU, 3,450 RPM, 1/3 hp,
Single Phase, 115/230 Volt, 60 Hz, 6.8/3.4 Amps.
Coke/Coal Blacksmithing
Item # Weight
COKE Coke 50 lb/BAG
Our Coke is, ‘bituminous coal’ or known as ‘coal-coke’, from Alabama.
It is processed and sized (1/4 x 1”) to be used in blacksmith forges. It is
made from good soft coal and will burn very hot. This is not petroleum coke
or anthracite coal!
Moisture 12% Ash 8%
Volatile 1% Carbon 91%
Sulfur 0.70%
COAL Coal 50 lb/BAG
Our coal comes from West Virginia and is of excellent quality.
Moisture 2.36% Ash 04.38/04.48%
Volatile 28.66/29.35% Fixed Carbon 64.60/66.17%
B.T.U.A.B. 14528/14878 Sulfur 00.69%/00.71%
Forge/Kiln Linings
Item # U/M
RCD Refractory Cement-Dry (GM Drybond) LB
Refractory Cement contains cristobalite (crystalline silica), hydrous alumina
silicate, aluminum sulfate.
KW8 Kao Wool, 8 lb, (1” thick x 2’ wide) LFT
Used to insulate high temperature furnaces, kilns and gas forges. It has a
very low density and high purity. It features a maximum temperature rating
of 2400°F (1316°C). The blanket can be cut with scissors making it possible
to cut different shapes. It can be coated with a hard refractory to
protect it from physical damage and creating airborne refractory dust. If
you are interested in purchasing this coating please contact us.
General Parts
Item #
VFBarb Barb (Male) 1/4” Pipe Thread
VFFer Ferrule
PTReg Fisher Regulator 3-35 psi
VFGV Gate Valve (Ball) 1/4” Pipe Thread
HOSE Hose (without Barbs or Ferrules)
VFH-6 LP Gas Hose (with Barbs and Ferrules), 6 ft
VFH-10 LP Gas Hose (with Barbs and Ferrules), 10 ft
VFOrif Orifice (not drilled)
VFPol POL Fitting 1/4” MPT
80 1-888-743-4866 Pieh Tool Company, Inc.