Blacksmith Metalsmith Knifemaker Farrier Blacksmith ... - Pieh Tool
Blacksmith Metalsmith Knifemaker Farrier Blacksmith ... - Pieh Tool Blacksmith Metalsmith Knifemaker Farrier Blacksmith ... - Pieh Tool
FLY PRESSES Fly Presses John Crouchet at his Fly press. Be sure to check out our Fly Press Tooling and Accessories and Fly Press DVD (page 126) by John Crouchet. Fly Press C Frame Model All fly presses have an extra heavy cast frame, with ribbed construction and cast tapered central ram and machined guideways and is easily adjustable against wear and tear. The bed is provided with heavy duty adjustable steel die holding clamps which will preserve your dies and allows easy indexing of your die and tool. The base hole is adjustable with bushings to suit different jobs. The large hole is available by easily removing smaller ring in the base. The top end of the screw has hexagonal tapered reception for the wheel to ensure no-slipping. This allows quick & easy repositioning of fly wheel and handle. Mild steel screw with heavy duty square angular thread and threaded die hole. The adjustable clutch allows the fly wheel to stay put when you back it up. You don't have to worry about the handle spinning down on you while you change tooling. This is done with the interplay of the two nuts on top of the ram. It is up to you to make this adjustment, but it can be done in a couple of minutes. Applications of Fly Presses: Punching, Cutting, Chiseling, Fullering, Pressing, Slitting, Drifting, Bending, Stamping, Deep Drawing, Texturing & Surface Ornamentation, Straightening, Open and Closed Die Work, Bending Large Stock in Graceful Arcs, and Cones or Corkscrew Like Shapes. Combine these forms to add a new dimension to your work. Break into the high end architectural, furniture, lighting or sculpture markets. Great for furniture (tables, beds, chairs, etc.) Ornamental Ironwork like: gates, railings, fences and much more. If you have a repetitive element to make, just weld up the top profile and insert it into the top hole in the ram. Place the bottom profile on the press bed. Insert the hot steel in between the top and bottom tools and with a motion like closing a refrigerator door, out pops your repetitive element. Can't get much easier than that. See the photo at the left. Think of the drudgery, time and money you'll save and how much faster you can make your various elements. No electricity required. No noise either. The only limitation is your imagination and initiative. What the fly press really means to the shop owner is PROFIT! Less time doing repetitive jobs, more time working on new jobs or spending time with friends and family. What this also means is now you can take on more jobs and perform processes previously impossible using other means or without a helper on hand and lot of time getting it right. C-Frame Features: • Two die clips for the base to hold tooling or dies to the base • Large round flywheel • No Ball weight style head bangers • One handle rod • Single sided frame. Specifications Item# CF0 CF1 CF2 CF3 CF4 CF5 CF6 CF8* Base to Guide: 4-1/2” 5” 5-3/4” 6-3/4” 7-1/4” 8” 9” 11” Center to back: 3” 3” 3-3/4” 4-1/2” 4-3/4” 5-1/4” 6” 7-1/2” Diameter of Screw: 1-7/16” 1-11/16” 1-11/16 1-11/16” 1-7/8” 1-7/8” 2-3/8” 3” Hole through Base: (without ring) 1-3/4” 2” 2-1/2” 3” 3-1/2” 4” 4-1/2” 6” Hole through Base: (with ring) -- -- -- 1-1/2” 1-3/4” 2” 2-1/4” 3” Stroke: 3” 4” 4-1/2” 4-1/2” 5-1/2” 5-3/4” 6” 8” Hole in Ram Diameter: 1” 1” 1” 1” 1” 1” 1” 1-1/2” Hole in Ram Depth: 1-1/2” 1-1/2” 1-1/2” 1-1/2” 1-1/2” 1-1/2” 2” 2-1/2” Diameter of Flywheel: 18” 18” 19-1/4” 21” 23” 23” 29” 32” Weight of Flywheel: 44 lb 48.5 lb 62 lb 80 lb 94 lb 100 lb 148 lb 200 lb Height of the body: 19-1/4” 19-1/4 21-1/2” 23-3/4” 26-1/4” 28-3/4” 33-1/4” 40” Net Weight: 77 lb 171.6 lb 220 lb 308 lb 374 lb 440 lbs 660 lb 1,075 lb Ship Weight: 115 lb 215 lb 310 lb 350 lb 560 lb 588 lbs 870 lb 1,150 lb *The #8 Fly Press is Special Order and needs 4-6 month lead time. Prepayment is required. 78 1-888-743-4866 Pieh Tool Company, Inc.
FLY PRESS ACCESSORIES & TOOLING Fly Press Accessories & Tooling Pieh Legacy Collection Pieh Tool Fly Press Stand Item # PTFPST Fly Press Stand Our sturdy stand was designed by John Crouchet (DVD5 How to use a Fly Press) is manufactured at Pieh Tool Company from A36 steel. The legs are angled to give more stability and strength and are made from 2” hot rolled steel welded tubing. The 1” welded diagonal support bars on three sides provide the added strength needed to handle the constant counter clockwise turning force of the fly press. The front has a 1” cross section bar providing strength while also allowing you to sit close to your press with legs underneath. The front opening of the table allows for easy cleaning and room to keep your tooling handy. The vertical welded 1-1/2” sections on three sides keeps your tools safe from falling onto the floor. Fits our #5 and #6 presses. We recommend you bolt the stand to your floor. We will modify the table top holes to accommodate other size presses on request. Stand is left unpainted. Table Height: 31”; Table Size: 24 X 24 X 3/8”; Footprint: 39 X 36”; Weighs 122 lbs. Ships motor freight only. We can customize other sizes! Pieh Tool - Crouchet Fly Press S7 Tooling & Accessories Item # PTFPSBT Side Butcher Set Great for making shoulders or tenons. Tool steel construction with welded back. 1” shanks. Set includes top and bottom. PTFPF-1 Fuller Set, 1” radius PTFPF-3/4 Fuller Set, 3/4” radius PTFPF-5/8 Fuller Set, 5/8” radius PTFPF-1/2 Fuller Set, 1/2” radius PTFPF-3/8 Fuller Set, 3/8” radius Fullers make reducing or stretching stock effortless. Can be used to make shoulders or other indentations. Tool steel construction with welded steel back. Has 1” shanks. Set includes top and bottom. PTCFP-VCL Veining Tool, Large PTCFP-VCS Veining Tool, Small Use with your fly press to make veining in leaves or to mark stock for twists or decoration. Tool steel construction with welded steel back. 1” shank. PTFPBDF Bending Die & Forcer Set Our right angle forcer and base is constructed from steel. Make right angle bends easy on hot or cold steel. Has a 1” shank. Set includes top and bottom. PTCFP-M Mushroom Use underneath a leaf to provide a curved working surface while using the veining chisel or ball punch. The piece can be rocked on the mushroom to create curved lines. Can be used at the anvil or fly press. Made from low carbon steel and is soft (not hardened) & can be hardened with Kasenit. (Item #KSNT1-1) We left it soft so that the veining chisels or ball punches would not be damaged. 3 1/2” OAH, 2-3/8” x 2”. Has a 1” shank. Fuller Set Side Butcher Fly Press Stand Used fly presses, with high quality screws that aren't worn out, are hard to find. Many of the used machines don't have a steep enough pitch to the screw. This means that you must have multiple revolutions of the fly wheel. Our presses are designed, from the ground up, for forging. Note, the screw only requires a bump on the handle that hangs down from the fly wheel. For bigger jobs try a full revolution. You might need a full revolution for hot bending a 2x4" piece of bar stock on some of the smaller machines. This is a four lead screw and the fly wheel on top sits on an octagonal screw for positioning the handle to the most comfortable and productive position. We offer an excellent DVD on how to use a Fly Press and how to make tooling. See page 126. See page 52 for photos of the 1/2” Ball and Character Punches. Pieh Tool S7 Ball & Character Punches These are a shortened version of the 7” tools. 1/2” Shanks (Fits 1/2” Tool Extension) Item # Item # Item # DE000-FP Duck Eye Punch BP500-FP Ball Punch, 1/2” BP125-FP Ball Punch, 1/8” EE000-FP Eagle Eye Punch BP437-FP BP375-FP BP312-FP BP250-FP BP188-FP Ball Punch, 7/16” Ball Punch, 3/8” Ball Punch, 5/16” Ball Punch, 1/4” Ball Punch, 3/16” Ball Punch EP250-FP Eye Punch, 1/4” EP188-FP Eye Punch, 3/16” EP125-FP Eye Punch, 1/8” ES000-FP Eye Socket Punch WE000-FP Wolf Eye Punch Ball Tool 1” & 1 1/4” HE000-FP Horse Head Ear Punch CP000-FP Center Punch 1” Shank (Fits 1” Tool Extension) BP1125-FP Ball Tool, 1-1/4” BP1000-FP Ball Tool, 1” Vein Tool Bending Die/Forcer Mushroom Accessories Pieh Tool Item # PTCP4/5/6 Clamping Plate, (for #4, 5, 6) Tee-nuts and cap screws included (not pictured). The bolt holes are countersunk. The clamp plate is necessary in order to use your fly press for blacksmithing. The Hardie Bolster or Guided Bolster is clamped to this plate with vise grips. 3/8 x 10 x 19” PTHB1-19 Hardie Bolster, 1” (for #4, 5, 6) This plate holds your hardy tools that you already have. Designed to hold our Mushroom, Side Butcher and Fullers. Attach to our Clamping Plate. Has 1“ square hole, 19“ long. PTGB38-19 Guided Bolster (for #4, 5, 6) Use as a guide so that your working piece stays straight. Consists of a plate and guide. 3/8 x 4 x 19” PTTE1 Tool Extension, 1” hole PTTE58 Tool Extension, 5/8” hole PTTE34 Tool Extension, 3/4” hole PTTE12 Tool Extension, 1/2” hole All tool extensions have a 1” round shank. Used to hold and extend your tools under the fly press ram. Allows for quick tool changing. Allen cap screw locks your tool in place. PTC1x2.5 Collar PTC1x2.5D.5 Collar, 1/2” hole drilled Used for making your own tooling. A collar is the shank ready to be welded to the tool. PTSLV Fly Press Sleeves Adaptors fit the tooling extensions: 1/2”, 5/8”, 3/4”. Collar, Drilled (shown with S7 piece) Pieh Tool Company, Inc. 1-888-743-4866 79 Collar Clamping Plate Hardy Bolster Guided Bolster Tooling Extension We can make most of our tooling in other shank sizes, including the Tool Extensions. Please contact us with your requests.
- Page 31 and 32: Dewormers Farnam Item # HHEIP Horse
- Page 33 and 34: Farrier Aprons Leather - Continued
- Page 35 and 36: Farrier Rasps Nicholson Item # 1815
- Page 37 and 38: NIPPERS, NAIL PULLERS, PULL OFFS Ho
- Page 39 and 40: Clinchers (continued) Lopez Item #
- Page 41 and 42: BLACKSMITH & KNIFEMAKER APRONS Blac
- Page 43 and 44: The Bill Pieh Resource for Metalwor
- Page 45 and 46: ANVILS SPECIFICATIONS CHART ANVIL C
- Page 47 and 48: Wilton Shop Vise NC Folding Stand w
- Page 49 and 50: Rounding Hammers Pieh Legacy Collec
- Page 51 and 52: SPECIALTY HAMMERS, LAPIDARY Special
- Page 53 and 54: Chasing Raising 300g Picard Chasing
- Page 55 and 56: Rectangular Stake Square Stake Crea
- Page 57 and 58: Chisels Pieh Legacy Collection Pieh
- Page 59 and 60: Repousse Supplies Item # PB8 Pitch
- Page 61 and 62: BLACKSMITHING & FARRIER TONGS Tongs
- Page 63 and 64: RIVET SPECIFICATIONS, LAG BOLTS For
- Page 65 and 66: Magnets Item # PM Pencil Magnet To
- Page 67 and 68: Utility Tools, Saws Folding Jab Saw
- Page 69 and 70: M18 Cordless LITHIUM-ION 1/2” Hig
- Page 71 and 72: M12 Cordless LITHIUM-ION Copper Tub
- Page 73 and 74: DRILL & DRIVER BITS/SAW BLADES Milw
- Page 75 and 76: GRINDERS, BUFFERS, BENDERS Jet Grin
- Page 77 and 78: Beverly Shears (Throatless) Beverly
- Page 79 and 80: Free Form Forging Dies Item # LDC L
- Page 81: Pein Anvil Die Set We use the Mark
- Page 85 and 86: WELDING FLUXES, COMPOUNDS, INGOTS W
- Page 87 and 88: Forgemaster When you are in the mar
- Page 89 and 90: Johnson Gas Furnace Forges Versatil
- Page 91 and 92: FARRIER PROPANE FORGES (continued)
- Page 93 and 94: Ceramic Shell Burn-Out Furnaces Joh
- Page 95 and 96: CLOTHING, SUSPENDERS & GIFTS Clothi
- Page 97 and 98: BK469 Custom Knifemaking, McCreight
- Page 99 and 100: BLACKSMITHING TECHNIQUES & PROJECTS
- Page 101 and 102: BK959 Boone Wrought Iron, Plummer 7
- Page 103 and 104: BK941 Make Your own Woodworking Too
- Page 105 and 106: BLACKSMITHING DECORATIVE & SCULPTUR
- Page 107 and 108: BK732 Fireplace Accessories, Meilac
- Page 109 and 110: BK808 Masterpieces of 18th Century
- Page 111 and 112: PATINAS & FINISHES BK976 *S/O Bronz
- Page 113 and 114: BK78 Heat Treatment, Selection, and
- Page 115 and 116: BK798 Mousehole Forge, Postman, Hat
- Page 117 and 118: BK192 Expose of Repousse for the Be
- Page 119 and 120: JEWELRY & PMC BK98 Beaded Chain Mai
- Page 121 and 122: DESIGN & STYLE BK927 Art Forms Plan
- Page 123 and 124: BK657 How to Sell What you Make, Ge
- Page 125 and 126: BK105 Natural Balance Hoof Care Boo
- Page 127 and 128: BOOKS OXEN & MULES, FARRIER INVOICE
- Page 129 and 130: ARMOR DVD53 Armorer’s Workshop Se
- Page 131 and 132: VIDEOS BLACKSMITHING, CHASING & REP
FLY PRESSES<br />
Fly Presses<br />
John Crouchet at his Fly press.<br />
Be sure to check out our<br />
Fly Press <strong>Tool</strong>ing and Accessories<br />
and Fly Press DVD (page 126)<br />
by John Crouchet.<br />
Fly Press C Frame Model<br />
All fly presses have an extra heavy cast frame, with ribbed construction and cast tapered<br />
central ram and machined guideways and is easily adjustable against wear and tear. The bed<br />
is provided with heavy duty adjustable steel die holding clamps which will preserve your dies<br />
and allows easy indexing of your die and tool. The base hole is adjustable with bushings to<br />
suit different jobs. The large hole is available by easily removing smaller ring in the base. The<br />
top end of the screw has hexagonal tapered reception for the wheel to ensure no-slipping.<br />
This allows quick & easy repositioning of fly wheel and handle. Mild steel screw with heavy<br />
duty square angular thread and threaded die hole. The adjustable clutch allows the fly wheel<br />
to stay put when you back it up. You don't have to worry about the handle spinning down on<br />
you while you change tooling. This is done with the interplay of the two nuts on top of the<br />
ram. It is up to you to make this adjustment, but it can be done in a couple of minutes.<br />
Applications of Fly Presses: Punching, Cutting, Chiseling, Fullering, Pressing, Slitting,<br />
Drifting, Bending, Stamping, Deep Drawing, Texturing & Surface Ornamentation, Straightening,<br />
Open and Closed Die Work, Bending Large Stock in Graceful Arcs, and Cones or Corkscrew<br />
Like Shapes. Combine these forms to add a new dimension to your work.<br />
Break into the high end architectural, furniture, lighting or sculpture markets. Great for<br />
furniture (tables, beds, chairs, etc.) Ornamental Ironwork like: gates, railings, fences and<br />
much more.<br />
If you have a repetitive element to make, just weld up the top profile and insert it into the top<br />
hole in the ram. Place the bottom profile on the press bed. Insert the hot steel in between<br />
the top and bottom tools and with a motion like closing a refrigerator door, out pops your<br />
repetitive element. Can't get much easier than that. See the photo at the left.<br />
Think of the drudgery, time and money you'll save and how much faster you can make<br />
your various elements. No electricity required. No noise either. The only limitation is your<br />
imagination and initiative.<br />
What the fly press really means to the shop owner is PROFIT!<br />
Less time doing repetitive jobs, more time working on new<br />
jobs or spending time with friends and family. What this<br />
also means is now you can take on more jobs and perform<br />
processes previously impossible using other means or<br />
without a helper on hand and lot of time getting it right.<br />
C-Frame Features:<br />
• Two die clips for the base to hold tooling or dies to the base<br />
• Large round flywheel<br />
• No Ball weight style head bangers<br />
• One handle rod<br />
• Single sided frame.<br />
Specifications<br />
Item# CF0 CF1 CF2 CF3 CF4 CF5 CF6 CF8*<br />
Base to Guide: 4-1/2” 5” 5-3/4” 6-3/4” 7-1/4” 8” 9” 11”<br />
Center to back: 3” 3” 3-3/4” 4-1/2” 4-3/4” 5-1/4” 6” 7-1/2”<br />
Diameter of Screw: 1-7/16” 1-11/16” 1-11/16 1-11/16” 1-7/8” 1-7/8” 2-3/8” 3”<br />
Hole through Base:<br />
(without ring)<br />
1-3/4” 2” 2-1/2” 3” 3-1/2” 4” 4-1/2” 6”<br />
Hole through Base:<br />
(with ring)<br />
-- -- -- 1-1/2” 1-3/4” 2” 2-1/4” 3”<br />
Stroke: 3” 4” 4-1/2” 4-1/2” 5-1/2” 5-3/4” 6” 8”<br />
Hole in Ram Diameter: 1” 1” 1” 1” 1” 1” 1” 1-1/2”<br />
Hole in Ram Depth: 1-1/2” 1-1/2” 1-1/2” 1-1/2” 1-1/2” 1-1/2” 2” 2-1/2”<br />
Diameter of Flywheel: 18” 18” 19-1/4” 21” 23” 23” 29” 32”<br />
Weight of Flywheel: 44 lb 48.5 lb 62 lb 80 lb 94 lb 100 lb 148 lb 200 lb<br />
Height of the body: 19-1/4” 19-1/4 21-1/2” 23-3/4” 26-1/4” 28-3/4” 33-1/4” 40”<br />
Net Weight: 77 lb 171.6 lb 220 lb 308 lb 374 lb 440 lbs 660 lb 1,075 lb<br />
Ship Weight: 115 lb 215 lb 310 lb 350 lb 560 lb 588 lbs 870 lb 1,150 lb<br />
*The #8 Fly Press is Special Order and needs 4-6 month lead time. Prepayment is required.<br />
78 1-888-743-4866 <strong>Pieh</strong> <strong>Tool</strong> Company, Inc.