Blacksmith Metalsmith Knifemaker Farrier Blacksmith ... - Pieh Tool

DRILL PRESSES, BRAKES, SAWS
Jet Drill Presses
Item # Ship Wt.
354401 Jet 15” Bench Model Drill Press 115V, #J-2530 157 lb
354400 Jet 15” Floor Model Drill Press 115V, #J-2500 167 lb
115V, 1 Ph 3/4 HP. The J-2530 and the J-2500 Drill Presses boast a
45” tilting table and a cast iron head with large quill - allowing greater
accuracy. Features a permanently lubricated heavy duty ball bearing (4)
spindle assembly in an enclosed quill for longer life & accuracy.
The large ground steel column gives maximum head and table support.
Specifications: J-2530 J-2500
Number of Spindle speeds 16 16
Spindle Taper MT-2 MT-2
Quill Diameter 1-7/8” 1-7/8”
Column Diameter 2-7/8” 2-7/8”
Drilling Capacity Cast Iron 5/8” 5/8”
Drilling Capacity Mild Steel 1/2” 1/2”
Quill & Spindle Travel 3-1/8” 3-1/8”
Chuck/Arbor Size 5/8” 5/8”
Drills to Center of Circle 15” 15”
Swing 15” 15”
Distance Column to Spindle 7-1/2” 7 1/2”
Spindle Distance to Base 24” 48 3/4”
Max Distance - Spindle to Table 15-1/2” 24”
Distance Base to Spindle 24” 48 3/4”
Table Size 11-1/2 x 11-1/2” 11-1/2 x 11-1/2”
Base Work Table 8 x 8” 7 x 7 1/2”
Base Dimensions 18 x 10-1/2” 11 x 19-1/2”
Overall Dimensions 31 x 13 x 39 1/2” 31 x 13 x 63”
Gross Weight 163 lb 167 lb
ADDED FEATURES
Hinged metal belt and pulley cover; Accurate depth stop displays
inch/mm and has a quick set bolt for fast accurate adjustments.
J-2500 Floor
Model Drill Press
Special
Order
2
Year
Warranty
Jet Saws
Item # Ship Wt.
414220 Jet Manual Bench Model Cold Saw 115V, #J-F225 84 lb
579002 Replacement Blade for Jet J-F225 Cold Saw 1 lb
The J-F225 Manual Bench Cold Saw includes a 225mm blade for sawing solid steel. With a 1HP motor,
manual vise, bronze worm gear, and hardened bronze ground worm screw gear box, this bench cold
saw is everything but small. Manually cuts from 0-45 degrees from the left. Features an oil bath and a
control handle with a safety spring loaded trigger switch to start or stop the machine.
Saw has a coolant system, manual vise and an adjustable depth stop.
414459 Jet Horizontal & Vertical Bandsaw 115/230V, #HVBS-7MW 286 lb
The JET HVBS-7MW Metalworking Bandsaw is UL listed and powered by a 3/4 HP motor. Four large
diameter wheels and built in handle allow easy movement. Unit comes equipped with a 3/4” carbon
steel blade, chip brush adjustable material stop and vertical worktable. Unit shuts off automatically after
each cut. Features a heavy cast iron bow & bed, a hardened ground worm gear box and a hydraulic
downfeed for ease of cut. Unit is on a convenient roller cabinet with a built-in chip tray.
Specifications: HVBS-7MW
Motor 3/4 HP, 115/230V, 1 Ph Pre-wired 115V
Round at 90 Degrees 7”
Round at 45 Degrees 4-1/2”
Rectangle at 90 Degrees 2 x 12” / 7” x 10-7/8"
Blade Size 3/4 x .035 x 93“
Blade Speeds (SFPM) 86, 132, 178, 260
Bed Height 23”
Vertical Work Table Size 9-3/8 x 10”
Vise Swivels 45 degrees
Blade Length 93”
Rectangle at 45 Degrees 7 x 3-1/2" / 5-1/2 x 4-1/2"
Throat Depth 7”
Blade Wheel Diameter 11-3/4”
Overall Dimensions 20-1/2 x 49-1/2" x 38"
Gross Weight 330 lb
Jet Bench Hand Brake
Item # Ship Wt.
756216 Jet 48” Bench Hand Brake, 16 GA 439 lb
Model #HB-1648H
Suitable for many types of metalforming operations.
All body sections are welded steel plate. Heavy truss
rods and braces are designed to give superior strength.
Precise bed and beam alignment assures working
accuracy. Features a removable apron nose extension.
Specifications:
Height 31”
Width 23”
Length 63”
Mild Steel Capacity (Gauge) 16
Maximum Lift of Beam 1-1/4”
Bending Length Capacity 48”
Beam Adjustment (Front to Rear) 5/8”
2
Year
Warranty
Special Order
2
Year
Warranty
Specifications: J-F225
Round at 90 Degrees 2-1/2”
Round at 45 Degrees 2”
Rectangle at 90 Degrees 2-1/2 x 2-15/16”
Square at 90 Degrees 2-1/4 x 2-1/4”
Blade Size 225mm x 32mm x 2mm
Blade Speeds (RPM) 52
Maximum Vise Opening 2-3/4”
Motor 1 HP, 1 Ph, 115V
Square at 45 Degrees 2”
Gross Weight 145 lb
Overall Dimensions 24 x 18 x 27”
Saws are Special Order
72 1-888-743-4866 Pieh Tool Company, Inc.