Blacksmith Metalsmith Knifemaker Farrier Blacksmith ... - Pieh Tool

GRINDERS, BUFFERS, BENDERS
Jet Grinder
Item # Ship Wt.
577101 Jet Industrial Bench Grinder #JBG-6A, 6” 37 lb
3,450 RPM; 1/2 HP, 115V, 1Ph. Dimensions (LWH): 17 x 10 x 9”
6 x 3/4” Wheel with a 1/2” Shaft. Includes 36 & 60 grit grinding wheels.
Used for cleaning, sharpening, buffing, removing rust, & removing burs
from metal. Features heavy duty construction with a powerful, long-life
motor for use all day, every day. Comes standard with fine and coarse
vitrified grinding wheels, cast iron wheel guards and dust vents. Totally
enclosed pre-lubricated ball bearings. UL listed.
• Heavy Guarded Toggle Switch
• Rubber Foot Mounts
• Quick Adjusting Spark Guards
577172 Jet Pedestal Stand, #JPS-2A 52 lb
Compatible for all JET Bench Grinders. Heavy cast iron construction
provides strength and durability. Wide stance base provides a stable
workstation. The coolant tank and tool tray are conveniently located on an
adjustable platform. Height: 31”; Mounting Surface: 11 x 10”
Baldor Buffer
Item # Ship Wt.
114 Baldor Industrial Buffer, 20C 4P 24 lb
For use with soft cloth buffing wheels and buffing compounds.
Includes flanges and nuts.
1,800 RPM, 1/4 HP, 60 Hz, 1 Ph. 115V
Wheel: 1/2 to 3/4” thick, 6” diameter.
U.L. Listed not C.S.A. Certified.
Power cord not included, wiring is
required.
FOB Manufacturer-Special Order
Jet Pipe Bender
Item # Ship Wt.
331900 Jet 2” Hydraulic Pipe Bender, #JHPB-20 115 lb
Simple manual operation! Six bending dies
included: (1/2”, 3/4”, 1”, 1-1/4”, 1-1/2”, 2”)
Rotating stand locks in three positions for stability
and versatility. The Heavy-duty hydraulic cylinder is
capable of bending schedule 40 pipe. The radius
produced with a 90 degree bend on different size
pipes are listed below.
1/2” 75mm
3/4” 94.5mm
1” 118mm
1-1/4” 149mm
2
Year
Warranty
Pipe Size Inside Radius Pipe Size Inside Radius
1-1/2” 169mm
2” 212mm
2-1/2” 262.25mm
3” 313.75mm
• Large Quick Adjusting Eye Shields
• Adjustable Tool Rests
Pedestal
Stand
Max. Pipe Wall: 0.20”; Max Load: 9”; Piston Stroke: 10-1/4”, Ram: 1-3/4”
Don’t see what a product you wanted?
We can order any Jet or Baldor products for you!
Please inquire.
Find Grinding Wheels and Sanding Belts on Page 70
Baldor Belt
Sander
Belt Sanders
Item # Ship Wt.
2048-151D Baldor Abrasive Belt Sander, 2 x 48” 88 lb
3,600 RPM; 1 1/2 HP, 115/230V 60 HZ, 1 Ph. Supplied with start/stop
Switch. Power cord not included - wiring is required. U.L. Listed but
not C.S.A. Certified. FOB Manufacturer-Special Order.
577004 Jet Bench Belt & Disc Sander, 2 x 42” (8”) 60 lb
3,450 RPM; 3,100 SFPM; 3/4 HP; 115V, 1 Ph; (20.5x23x20”)
Allows for sanding, grinding or finishing of outside curves or odd shaped
work pieces on the belt. Abrasive belt unit does the work of a jig saw,
coping saw, or hand file while removing material and finishing.
• 45° Locking Disc/Miter Table Tilt
• Miter Table is slotted to accept
Deluxe Miter Gauge
• Hinged Idler Wheel Cover
• Removable Platten, Dust Chute
FOB Manufacturer-Special Order
“Built for knifemakers by
a 15 year knifemaker veteran.”
Jet Bench Belt
& Disc Sander
• Chamfer or Bevel
• Grind, Finish on Disc or Belt
• Fast, Cool Cutting
• Cast Construction, Steel Base
• Cast Iron Tilting Table
Bench Grinder Attachment
Multitool
Item # Ship
Wt.
MT362 Multitool 2 x 36” Bench Grinder Attachment 16 lb
MTBL Miter Table Attachment
Multitool 362 Attachment fits on most 6-8" grinders with minimum 1/3 HP.
This is a must-have tool for any fabricator! Removes material up to 5X
faster than with the equivalent grit grinding wheel. Includes (1) 100 grit
3M belt & (1) 80 grit 3M disk. OSHA & UL compliant guards.
2 x 36" Belt, 7” Disk; Miter Table Size: 4 1/4 x 10", 3,450 RPM.
Pieh Tool Company, Inc. 1-888-743-4866 71
2
Year
Warranty
TW-90 Knifemakers Vertical/Horizontal Sander, 2 x 72”
2 HP Variable Speed, 110/220V 1 Ph. (1-1/2 HP, 110V 1 Ph).
Combination grinder that can be easily switched between the
vertical and horizontal position. Includes a variety of tool rests &
grinding tables that adjust for multi-angle grinding or flat grinds.
1/4” powder coated welded steel plate frame. A very QUIET Grinder!
• 90° Vertical to Horizontal Tilt
• Vertical and Horizontal Tool Rest
• KB Electronics Controller
• 8" Polyurethane Contact Wheel
• 2 x 10" Flat Platten
• CNC Machined Alum. Wheels
• Dual Bearings Wheels
• Multiple Configuration Billet
Quick Change Tool Rest
• Dual Fork Quick Change Small
Wheel Receiver (1/2" - 2")
Accepts Bader Small Wheels
Made in USA.
Miter Table Attachment