Blacksmith Metalsmith Knifemaker Farrier Blacksmith ... - Pieh Tool

PLIERS, WRENCHES, RULES, BITS
Pliers
Crescent®
C10SV Locking Pliers, 10”
Straight Jaw
Guarantees superior performance with a top quality
design and improved durability. 1-3/4” jaw capacity
stays adjusted for repetitive use.
C10CV Locking Pliers, 10”
and Wire Cutter, Curved Jaw
Compound action for powerful non-slip locking
grip, the versatile curved jaw also features integral
wire cutter. 1-3/4” jaw capacity stays adjusted for
repetitive use.
C11CCV Locking C-Clamp Plier, 11”
The Original Crescent® Locking C-Clamps (regular
tips) with wide-opening jaws provide greater
versatility in clamping a variety of shapes. Its
guarded release trigger quickly unlocks and protects
from accidental release. 4” jaw capacity stays
adjusted for repetitive use.
Wilton
Industry’s top choice for maintenance, production
and repair operations. Drop-forged steel frame,
regular-duty with extra deep-throat, black oxide
coated spindles and Perma-pad® resist corrosion,
and are replaceable Innovative frame geometry
for maximum strength. Made in the USA.
14042 404U C-Clamp Black Spindle
Height: 1.5”; Width: 5.5”; Length: 10.4”.
Clamp Pressure: 6,200 Lbs; Opening: 0 - 4-1/4”;
Throat Depth: 3-1/4”
14070 408U C-Clamp Black Spindle
Height: 1.5”; Width: 8.1”; Length: 15.6”.
Clamp Pressure: 6,900 Lbs; Opening: 0 - 8-1/4”;
Throat Depth: 5”
Tin Snips
Item #
MPC3 Metal Wiss® Snips, 9”
This is perfect for cutting copper sheet! Cuts curves,
straight or any combination. Designed for
multi-purpose use for the home craftsman.
Wrenches
AC8NKWMP Crescent® Rapid Slide Wrench, 8”
Slide adjuster positioned in handle of wrench allows
quicker jaw adjustment compared with knurled
adjuster found on traditional adjustable wrenches.
Features: 1” jaw capacity, SAE/Metric, wide handle,
forged steel with chrome finish, slider debris shield
maintains a smooth operation.
Wilton
Drop Forged upper and lower jaws with heavy duty
adjustable ring. Ductile cast iron handle. Floating
hook jaw with spring suspension for easier
gripping. Made in the USA.
38110 Ductile Pipe Wrench, 10”
1-1/2” pipe capacity
38114 Ductail Pipe Wrench, 14”
2” pipe capacity
Rules
Item #
86 Lufkin Steel Folding Rule, 2 ft
Rule comes to a firm stop when opened straight.
3/4” x 2’, 1/32” thick, 1-fold, tempered steel rule with
legible, permanent, deeply etched black markings.
Lower edge on one side is graduated to 1/16ths of
an inch, upper edge on other side to 1/8th. Lower
edge 75 deg. circumference is in inches to 1/8th,
for converting diameters directly to circumference
measurements.
Crescent Locking
Pliers
Crescent Locking
Pliers and
Wire Cutter
Crescent Locking
C-Clamp Pliers
Wilton C Clamp
Wiss Snip
Crescent Wrench
Wilton
Ductile Pipe
Wrench
Lufkin Steel
Folding Rule
Rules (continued)
Item #
Pieh Legacy Collection
PTBR Pieh Tool Brass Folding Rule
2 foot, 1 fold brass ruler features measurements
in the metric system as well as in inches.
Pieh Steel Rules
Our rules are made of 14 gauge, 304 stainless
steel and successfully resist rust. All numbers
and lines are laser-etched into the tool.
PTSQ.S Pieh Steel Square, 6”
PTSQ.ST Pieh Steel Tri-Square, 6”
The Tri-Square has an extra clip-on piece
allowing it to be held upright hands-free.
PTHR2 Pieh Tool Hook Rule Gauge
Quickly determine stock sizes without the
hassle of a tape measure. The slots are used
to determine the diameter of round stock, the
size of square stock and the thickness of flat
bar. The other side of the Hook Rule Gauge is
used to determine the width of flat bar.
PTPR6 Pieh Round Protractor, 6”
PTPR12 Pieh Round Protractor, 12”
PTPR24 Pieh Round Protractor, 24”
This extremely handy tool is a must for
those who need to layout accurate angles for
fabrication, blacksmithing and woodworking
among other situations.
Pieh Steel Rulers are MADE IN USA
Silver Pencils
Item #
92910-01 Silver Welders Pencil, 3 Pack
Marks clearly on raw metal with a fine line layout. It
actually “Illuminates” when welding or cutting. This
is by far the best, most effective metal marking tool
on the market. Ditch the soapstone and other metal
marking tools, try a pack of these today!
Soap Stone
Item #
SOAP Soap Stone
Soapstone for metal marking temporarily marks
metal surfaces during fabrication. It is all natural
for smooth marking and will not contaminate
welds. Easily removes from workpiece.
1/4 x 5”
Welding Magnets
Item #
WMA50 Welding Angle Magnet, Arrow
Strong magnets attract to any ferrous metal
object and leaves both hands free to safely
work on the project. Ideal for fast setup and
accurate holding for all welding jobs. The
arrow model covers 45, 90 and 135 degree
welding angles. But not recommended for lifting
applications, magnet has a pull rating of 50 lbs.
Measures 6 1/8 x 4.0” x 5/8”.
WMRB80 Magnetic Welding Ground
Strong gripping power holds securely to
ferrous metal work, providing positive ground
for welding applications. Ideal for pipe that
regular grounding clamps cannot grab.
3 1/2 x 2 1/4”. Spring-loaded stud keeps constant
contact. Copper stud provides 800 amps.
Handle rotates 360 degrees and pull of 95 lbs.
Pieh Tool Brass
Folding Rule
Pieh Square &
Tri-Square
Pieh Tool Hook
Rule Gauge
Pieh Tool Protractor
Silver Pencils
Soap Stone
Welding Angle Magnet
Magnetic Welding
Ground
62 1-888-743-4866 Pieh Tool Company, Inc.