Blacksmith Metalsmith Knifemaker Farrier Blacksmith ... - Pieh Tool

Chisels
Pieh Legacy Collection
Pieh
Item #
VC000 Pieh Veining Chisel, S7
VC000-H13 Pieh Veining Chisel, H13
The curve helps you to stay in the vein
allowing you to keep a straight line.
7” long. Try our entire collection of S7
tools. See our Punch Sets in the index.
Made in USA.
Peddinghaus
5045020000 Hot Chisel with Ash Handle
5046020000 Cold Chisel with Ash
Handle
6615110000 Hand Slitting Chisel
6615110000 Hand Slitting Chisel with
Plastic Handle Guard
The Peddinghaus slitting chisel is made of
chrome-molybdenum air-hardened steel with
a non-spread head. Made in Germany.
Hardys
Pieh Legacy Collection
Our hardy is drop forged from H13 tool
steel. Chisel style is beveled on both
sides. Made in USA.
Item #
PTCH750 Pieh Chisel Hardy, 3/4”
PTCH875 Pieh Chisel Hardy, 7/8”
PTCH100 Pieh Chisel Hardy, 1”
PTCH125 Pieh Chisel Hardy, 1-1/4”
PTCH750-B Pieh Bias Hardy, 3/4”
PTCH875-B Pieh Bias Hardy, 7/8”
PTCH100-B Pieh Bias Hardy, 1”
PTCH125-B Pieh Bias Hardy, 1-1/4”
Shank fits 1” hardy holes. May be used in
anvil hardy hole for forging or raising and
at the fly press, vise etc. Made in USA.
Ball Hardy
Item #
CDB1 Pieh Ball Hardy, 1”
Cone Mandrels
Pieh Legacy Collection
Pieh
Item #
PTCM34 Mini Mandrel, 3/4”
PTCM78 Mini Mandrel, 7/8”
PTCM1 Mini Mandrel, 1”
PTCM114 Mini Mandrel, 1-1/4”
Fits in anvil hardie hole. Shank is not
tapered. OAL: 8”, 5-3/4” from base to
tip. Diameter starts at 2” and tapers to
point. Fully machined. Made in the USA.
Green-Mengel
Item # Weight
GMCM15 Mandrel, 3/4” 15 lb
Foundry cast-finished with a tong grove.
OAL: 11”, Cone Length: 9”, Cone
Diameter: 4-1/2” - 3/8”. Shaft tapers 3/4 - 1”.
See more Chisels & Hardys in the
Farrier Tools Section, page 35.
We offer Swages and
Guillotines Fullers on see page 76.
CHISELS, HARDY TOOLS
Pieh
Veining Chisel
Slitting Chisel
Slitting Chisel
with Handle
Hot & Cold Chisel,
1500g, 24”
Pieh Hardy
Pieh Hardy
Bias
Pieh Ball
Hardy
Pieh Mini
Mandrel
Green
Mengel
Mandrel
Anvil Fork Saddle
Pieh Legacy Collection
All steel construction. The Pieh Tool Anvil Saddle works
great for scroll work and other fine detail work that you can’t
get around the horn. This tool is ideal for forging barbecue
forks! Also makes a great replacement for a worn out anvil
horn. Shank is 2” long. Surface can be treated with Cherry
Red to make a tougher working surface. Made in USA.
OAL 5-1/4” (OD x ID x L) 2 x 1 1/2 x 3”
Item #
PTAS750 Pieh Anvil Fork Saddle, 3/4”
PTAS875 Pieh Anvil Fork Saddle, 7/8”
PTAS100 Pieh Anvil Fork Saddle, 1”
PTAS114 Pieh Anvil Fork Saddle, 1-1/4”
Turning Forks
Pieh Legacy Collection
Fits in anvil hardy hole. Welded shank is not tapered.
Useful in bending stock at the anvil. Made in the USA.
Pieh
Item # Shank OAL Between Forks
TF34 3/4” 5-1/2” 5/8”
TF78 7/8” 5-1/2” 5/8”
TF1 1” 5-1/2” 5/8”
TF114 1-1/4” 5-1/2” 5/8”
Scrolling Wrench
Has a hole drilled in handle so you can hang it on a hook
in your shop. Made in USA.
Item #
CDSW12 Pieh Scroll Wrench, for 1/2”
10 inches long, 1-3/4 inch long jaw, 1-7/8” long prongs (2).
CDSW38 Pieh Scroll Wrench, for 3/8”
10 inches long, 2 inch long jaw, 1-1/2” long prongs (2).
Vise Scroll Tool
Pieh Legacy Collection
Item #
CDVSH Pieh Vise Scroll Tool
Our vise scroll tool has a hexagon base making it adaptable
to many holding methods. Two prongs protrude allowing for
tight bending or scrolling to be accomplished. Made in USA.
Smoosh-O-Matic
Item #
SMOOSH Smoosh-O-Matic, 1”
Fits in the anvil hardy hole to help you make tenons and
more. It comes with 2 sets of dies: a flat top and bottom
die set; and a side butcher top and bottom die set.
Made in USA.
Anvil Devil
An Anvil Devil is a hard triangular piece of heat-treated
steel that is used by farriers & blacksmiths for cutting or
making V notches. You can place it on any flat surface.
(or use in a GE Anvil Devil holder if you can still find one!)
Item #
SAD Anvil Devil, 2-1/2x1/2” (63.5x 13mm)
Rose Blank Kit
Pieh Legacy Collection
Item #
ROSE-K Pieh Rose Blank Set
This is a rose in kit form cut from 18 gauge steel. It
makes a very beautiful rose! Make it open or closed!
Consider embellishing with Gilders Paste or one of our
patinas for added beauty. Kit consists of 5 pieces; 1 each
of the following blanks: 4-1/2”, 3-1/2”, 2-3/4”, 2-1/2” and
a 2” bud bottom.
Pieh Anvil Fork
Saddle
Pieh Turning
Fork
Pieh Scrolling
Wrench 3/8”
Pieh Scrolling
Wrench 1/2”
Pieh Vise
Scroll Tool
Smoosh-O-Matic
Anvil Devil
Pieh Rose Blank
Photo of
Finished Rose
Pieh Tool Company, Inc. 1-888-743-4866 53