Blacksmith Metalsmith Knifemaker Farrier Blacksmith ... - Pieh Tool
Blacksmith Metalsmith Knifemaker Farrier Blacksmith ... - Pieh Tool
Blacksmith Metalsmith Knifemaker Farrier Blacksmith ... - Pieh Tool
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Farrier</strong> Rasps<br />
Nicholson<br />
Item #<br />
18155N <strong>Farrier</strong>’s Handy Rasp and File, 14“<br />
The Nicholson Handy Rasp is an American pattern and is<br />
tanged and is single cut on the edges. It features a comfortable<br />
cushion grip at point and handle. It has rasp teeth on one<br />
side and file teeth on the opposite side with 6 teeth per row<br />
(other horse rasps have 5 teeth per row). The rasp body is the<br />
same as the 14” Platers’s Special rasp. Overall length: 17 1/2”<br />
HR14 Horse Rasp and File, 14”<br />
American pattern farrier's rasp, has a double extra thin<br />
aggressive cut. Both sides are safe 7/8" 22mm at point.<br />
Rasp teeth on one side, file teeth on opposite and the cut is<br />
6 teeth per row. For race track and horses with light shoes.<br />
18130 Platers Magicut, 14”<br />
American pattern has a single cut on edges. Opposite side<br />
has the unique Magicut file pattern. These are narrow chip<br />
breakers created by steep and angled serrations. Tooth<br />
design is cut deeper to last longer and cuts much faster<br />
than conventional horse rasps.<br />
Bellota<br />
BTSR Top Sharp Rasp, 14”<br />
The aggressive design of the file side on the Top Sharp<br />
lets you get in and get out with maximum results.<br />
BCR Classic, 14”<br />
The smooth cut of the Classic file side is the best choice<br />
for a smooth finish.<br />
Heller by Mustad (formerly Simonds)<br />
SRTR Red Tang Platers, 14”<br />
Simonds, now Heller, set an industry standard with its<br />
Red Tang, providing the sharpest, longest lasting rasp available.<br />
SBR Black Master, 14”<br />
It features an industry standard of sharpening and a special<br />
tooth design. It also has a special black oxide coating that<br />
resists clogging, rust, and stays sharper longer. Has one<br />
more row of teeth than the Red Tang.<br />
SHL Legend, 14”<br />
This is an aggressive rasp especially useful in wet, muddy<br />
and gummy conditions. The thumbnail shaped tool cuts<br />
fast and smooth. The open tooth design resists clogging<br />
in muddy conditions, and the staggered tooth pattern<br />
pulls straight and leaves a smooth finish. The teeth are<br />
specially sharpened to stay sharper longer.<br />
SBHL Black Legend, 14”<br />
An aggressive rasp with the same SHL features. But the<br />
black finish resists clogging and loading, and decreases the<br />
opportunity for rust. The Black Heller Legend Rasp produces<br />
unbelievable consistency and longer lasting results.<br />
SBHR Big Hoof, 17”<br />
17” from heel to shoulder, 3” more than a standard rasp.<br />
Allows you to use fewer strokes, increasing your efficiency<br />
and reducing fatigue. This rasp can be used for warm<br />
bloods, draft horses, or any large horses.<br />
Save Edge<br />
SERP Rasp, 14”<br />
One of the best selling rasps on the market, it is sharp,<br />
consistent, and long lasting.<br />
SEBR-14 Beast, 14”<br />
SEBR-17 Beast, 17”<br />
This impressive rasp gives you 35% more cutting surface.<br />
Has the same patented Save-Edge tooth design.<br />
Vallorbe<br />
VR14 Spirit Rasp, 14”<br />
Vallorbe Swiss have been manufacturing rasps and files for<br />
over a century and their long experience is evident in this<br />
high quality horse hoof rasp, sharpened by the exclusive<br />
V-Sharp technology. Vallorbe rasps last considerably longer<br />
than other rasps due to the high quality steel used. They do<br />
not clog and they give a high quality finish.<br />
Nicholson <strong>Farrier</strong><br />
Handy Rasp<br />
Nicholson<br />
Magicut<br />
Nicholson<br />
Horse Rasp<br />
& File<br />
Save Edge<br />
Bellota<br />
Top<br />
Sharp<br />
Bellota<br />
Classic<br />
Red Tang<br />
Heller Legend<br />
Black Heller Legend<br />
Big Hoof<br />
Save Edge Beast<br />
RASPS, FILES<br />
<strong>Farrier</strong> Finishing Files<br />
Item #<br />
SBMFF Heller Black Finish File, 14”<br />
Specially treated with a black oxide coating. It<br />
lasts longer due to increased resistance to loading<br />
and rust.<br />
SMFF Heller Master Finish File, 14”<br />
SEFR Save-Edge Finish Rasp, 14”<br />
Save Edge rasps are known for their long lasting<br />
and patented tooth design.<br />
Metal Files<br />
Nicholson<br />
Item #<br />
05190 Half Round Pipeliner File, 14”<br />
American pattern half round pipeliner file, with a<br />
bastard cut for use on concave, convex and flat<br />
surfaces. Round on one side, flat on opposite.<br />
Both sides are single cut.<br />
07894 Flat Magicut File, 8”<br />
07917 Flat Magicut File, 10”<br />
American pattern flat Magicut file used by<br />
machinists as an all-purpose file to remove stock<br />
rapidly created by steep, angled serrations.<br />
Leaves a smooth finish. File has a rectangular<br />
shape, a tapered point in width.<br />
03863 Flat Bastard File, 14”<br />
American pattern flat file, with a bastard cut,<br />
used by machinists & repairman who require rapid<br />
removal of metal. Rectangular in cross section &<br />
in taper towards the point in width, double cut on<br />
sides, single cut on edges.<br />
16507 Bastard Cut Warding File, 4”<br />
American pattern warding file, bastard cut. Thin<br />
rectangular shape with double cut on sides, single<br />
cut on edges. Good for narrow spaces where<br />
other files will not fit.<br />
08354 Mill Bastard File, 6”<br />
American pattern mill file, bastard cut used for<br />
sharpening mill or circular saws, also for drawfiling<br />
and finishing metals. Rectangular shape<br />
with single cut on sides and edges. Has 2 square<br />
edges and tapers slightly in width.<br />
14729N Extra Slim Taper File, 8”<br />
American pattern extra slim taper file made<br />
for filing saws with 60° angle teeth. Triangular<br />
shaped, single cut with edges set and cut for<br />
filing gullets between saw teeth. Tapers slightly<br />
towards the point.<br />
02215 Flat Chain Saw File, 8”<br />
American pattern used for cutter-raker type (2 round<br />
edges) chain saws. Has a rectangular shape.<br />
01630 Round Chainsaw File, 5/32x6”<br />
01888 Round Chainsaw File, 7/32x8”<br />
American pattern smooth cut round chainsaw file.<br />
Heller by Mustad (formerly Simonds)<br />
Item #<br />
S6V2RE Veneer Knife - 2 Round Edges, 6”<br />
S8V2RE Veneer Knife - 2 Round Edges, 8”<br />
A specially sharpened Mill Bastard File with 2<br />
round edges designed to sharpen veneer knives.<br />
Veneer Knife Files are single cut and are parallel<br />
in width and thickness.<br />
Heller Black<br />
Finish File<br />
Save Edge<br />
Finish Rasp<br />
Nicholson<br />
Half Round<br />
Nicholson<br />
Magicut File<br />
Nicholson<br />
Flat Bastard<br />
Nicholson<br />
Bastard Cut<br />
Warding<br />
Nicholson Mill<br />
Bastard<br />
Nicholson Extra<br />
Slim Taper<br />
Nicholson Flat<br />
Chain Saw<br />
Nicholson<br />
Round<br />
Chain Saw<br />
Heller Veneer<br />
Knife<br />
Find Knife Sharpeners on page 61.<br />
<strong>Pieh</strong> <strong>Tool</strong> Company, Inc.<br />
Vallorbe Rasp<br />
1-888-743-4866 31