Heavy Duty Balanced Opposed Compressors - Ariel Corporation
Heavy Duty Balanced Opposed Compressors - Ariel Corporation
Heavy Duty Balanced Opposed Compressors - Ariel Corporation
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
FOR MODELS: JGZ AND JGU SECTION 3 - START UP<br />
START-UP CHECK LIST - ITEMS TO CHECK IN THE FIELD AT COMMISSIONING<br />
Description Date Checked Date Verified<br />
27. Record “out of plane” readings (post-grout) - see<br />
ER-82. NOTE: If applicable after reassembly, send<br />
readings to <strong>Ariel</strong>.<br />
_________ _________ _________ _________<br />
_________ _________ _________ _________<br />
28. For electric motor drivers, check and verify the motor shaft<br />
is set at its magnetic center before positioning axial clearance.<br />
Check and verify driver rotation matches the compressor<br />
rotation arrow.<br />
29. Check coupling bolt torque to coupling manufacturer<br />
recommendations.<br />
30. Check and verify compressor to driver alignment (installed<br />
on site, cold). Record dial indicator readings in inches<br />
(mm) at the 3, 6, 9 and 12 o’clock positions or attach alignment<br />
tool print-out.<br />
Face Rim<br />
If using a laser alignment tool, make a print out and<br />
attach it to this document.<br />
31. Check and verify compressor crankshaft thrust clearance.<br />
The shaft should remain stationary after thrusting each<br />
direction (see Technical Manual, Clearances).<br />
______________ ______________<br />
Commissioning Agent:<br />
__________________<br />
Commissioning Agent:<br />
__________________<br />
Commissioning Agent:<br />
__________________<br />
Commissioning Agent:<br />
__________________<br />
Commissioning Agent:<br />
__________________<br />
Distributor:___________<br />
Distributor:___________<br />
Distributor:___________<br />
Distributor:___________<br />
Distributor:___________<br />
PAGE 3 - 6 7/09