Heavy Duty Balanced Opposed Compressors - Ariel Corporation
Heavy Duty Balanced Opposed Compressors - Ariel Corporation Heavy Duty Balanced Opposed Compressors - Ariel Corporation
FOR MODELS: JGZ AND JGU SECTION 7 - APPENDICES age facilities are cost effective. Please contact Ariel if you have questions about tools on Ariel units. • Tool boxes for hand tools. 1 • 12 and 18 in. Adjustable Wrenches (Crescent Type). • 1Combination Open/Boxed End Wrench Set - 15 Piece, 5/16 thru 1-1/4 in. • 1 Screw Driver Set, Flat and Phillips - including 2 - Medium; 1 - Extra Large; 1 - Extra Long Sizes. • Forged Steel Punch and Chisel Set, including a 60° Center Punch. • 3/8 in. Square Drive Wrench Set, including: 1. 112 Point Socket Set - 12 Pieces, 3/8 thru 1 in., with clip rail, and Breaker Bar, Ratchet, Speed Wrench, and Extensions, 1-1/2, 3, 6 and 12 in. 2. 1Universal Joint, Impact Type (Ball). 3. 1Adapter to 1/2 in. Drive. 4. 11/4 in. Hex Key (Allen) Socket. 5. 2 Calibrated Torque Wrench, 30 to 200 Lb-In range. Or metric (3.4 to 23 N·m) range. • 1/2 in. Square Drive Wrench Set, including: 1. 112 Point Socket Set - 14 Pieces, 3/8 thru 1-1/4 in. with clip rail, and Breaker Bar, Ratchet, Speed Wrench, and Extensions, 2, 5, and 10 in. 2. 1 Universal Joint, Impact Style (Ball). 3. 1 Adapters to 3/8 and 3/4 in. Drive. 4. Open End Crowfoot "Torque Adapter" Extension Wrench Set, including 11-1/4 in. sizes. 5. 12 Point Box-End "Torque Adapter" Extension Wrench Set, including 1-1/2 and 2-1/4 in. sizes. 6. 1 1/2, and 5/8 in. Hex Key (Allen) Socket. 7. 2 Calibrated Torque Wrench, 30 to 250 LB-FT range, for use with right and left hand threads. Or metric (40 to 350 N·m) range. • 3/4 in. Square Drive Wrench Set, including: 1. 1 12 Point Socket Set - 18 Piece, 3/4 thru 2 in., and Breaker Bar, Ratchet, Extensions, 3-1/2, 8, and 16 in. 2. 1Adapters to 1/2 and 1 in. Drive. 3. 2 Calibrated Torque Wrench to 100 to 600 LB-FT range. Or metric (135 to 800 N·m) range. • 1 in. Square Drive Wrench set, including: 1. 1 12 Point Socket Set, 21 Pieces,1-7/16 thru 2-5/8 in. and Breaker Bar, and Extensions, 8 and 17 in. 1. Included in Separately Purchased SAE Hand Tool Kit G-16312. 2. Included in Separately Purchased SAE Hand Measurement Tool Kit G-16313. 7/09 PAGE 7 - 9
FOR MODELS: JGZ AND JGU SECTION 7 - APPENDICES • • • 2. 1 Adapter to 3/4 in. Drive. 3. 2Calibrated Torque Wrench to 200 to 1000 Lb-Ft range. Or metric (270 to 1400 N·m) range. 1 Two (2) Dead Blow Semi-Soft Faced Hammers, approximately 3 lb and 6 lb. Or metric, approximately (1.5 and 3 kg). 1 Long Blade Feeler Gage Pack in Assorted Thickness’. 1 Two (2) Pry Bars - 3/4 X 36 in. Or metric (2 cm x 1 m). • Hexagon Allen-Type Key-Wrenches (to ANSI/ASTM B18.3) for Piston-Nut Set- Screws. Two Hex Wrenches are Consumed (Destroyed) with each Tightening of a Piston Nut. A quantity of hex wrenches needs to be kept on hand, considering the consumption during maintenance. Hex Allen-type-wrench sizes for piston-nut setscrews - nominal inch sizes: 1. JGB:V:KBB:V 1/8. 2. JGH:E:K:T 5/32. 3. JGC:D:Z:U 3/16. • Tape Measure. • Flashlight. • Small Mirror on a Flexible Extension Rod. • Small Magnet on a Flexible Extension Rod. • Small Gas Torch. • Electric and/or Pneumatic Drill. • Twist Drill Set. • General Purpose Knife. • 1 - Medium and 1 - Large Ball-Peen Hammers. • Grease Gun. • Hacksaw. • Metal File Set. • Snap Ring Pliers. • Fine Grit Stone. • 1 12 in. Machinist scale with 0.01 in. increments. Or metric (0.5 mm) increments. 2 • Calibrated, Button Dial Indicator with 0.001 in. increments and Needle Dial Indicator with 0.0005 in. increments, and magnetic base. Or metric (0.01 mm) increments. • Torque Multiplier Wrench and/or Hydraulic Torque Wrench. TABLE 7-1 SI METRIC CONVERSION MEASUREMENT CONVERSION Area • square inch or in 2 x 0.00064516 = meter 2 or m 2 • square inch or in 2 x 6.4516 = centimeter 2 or cm 2 PAGE 7 - 10 7/09
- Page 155 and 156: FOR MODELS: JGZ AND JGU SECTION 5 -
- Page 157 and 158: FOR MODELS: JGZ AND JGU SECTION 5 -
- Page 159 and 160: FOR MODELS: JGZ AND JGU SECTION 5 -
- Page 161 and 162: FOR MODELS: JGZ AND JGU SECTION 5 -
- Page 163 and 164: FOR MODELS: JGZ AND JGU SECTION 5 -
- Page 165 and 166: FOR MODELS: JGZ AND JGU SECTION 5 -
- Page 167 and 168: FOR MODELS: JGZ AND JGU SECTION 5 -
- Page 169 and 170: FOR MODELS: JGZ AND JGU SECTION 5 -
- Page 171 and 172: FOR MODELS: JGZ AND JGU SECTION 5 -
- Page 173 and 174: FOR MODELS: JGZ AND JGU SECTION 5 -
- Page 175 and 176: FOR MODELS: JGZ AND JGU SECTION 5 -
- Page 177 and 178: FOR MODELS: JGZ AND JGU SECTION 5 -
- Page 179 and 180: FOR MODELS: JGZ AND JGU SECTION 5 -
- Page 181 and 182: FOR MODELS: JGZ AND JGU SECTION 5 -
- Page 183 and 184: FOR MODELS: JGZ AND JGU SECTION 5 -
- Page 185 and 186: FOR MODELS: JGZ AND JGU SECTION 5 -
- Page 187 and 188: FOR MODELS: JGZ AND JGU SECTION 5 -
- Page 189 and 190: FOR MODELS: JGZ AND JGU SECTION 5 -
- Page 191 and 192: FOR MODELS: JGZ AND JGU SECTION 6 -
- Page 193 and 194: FOR MODELS: JGZ AND JGU SECTION 6 -
- Page 195 and 196: FOR MODELS: JGZ AND JGU SECTION 6 -
- Page 197 and 198: FOR MODELS: JGZ AND JGU SECTION 6 -
- Page 199 and 200: FOR MODELS: JGZ AND JGU SECTION 7 -
- Page 201 and 202: FOR MODELS: JGZ AND JGU SECTION 7 -
- Page 203 and 204: FOR MODELS: JGZ AND JGU SECTION 7 -
- Page 205: FOR MODELS: JGZ AND JGU SECTION 7 -
- Page 209 and 210: FOR MODELS: JGZ AND JGU SECTION 7 -
- Page 211: FOR MODELS: JGZ AND JGU SECTION 7 -
FOR MODELS: JGZ AND JGU SECTION 7 - APPENDICES<br />
•<br />
•<br />
•<br />
2. 1<br />
Adapter to 3/4 in. Drive.<br />
3.<br />
2Calibrated Torque Wrench to 200 to 1000 Lb-Ft range. Or metric (270 to 1400<br />
N·m) range.<br />
1<br />
Two (2) Dead Blow Semi-Soft Faced Hammers, approximately 3 lb and 6 lb.<br />
Or metric, approximately (1.5 and 3 kg).<br />
1<br />
Long Blade Feeler Gage Pack in Assorted Thickness’.<br />
1 Two (2) Pry Bars - 3/4 X 36 in. Or metric (2 cm x 1 m).<br />
• Hexagon Allen-Type Key-Wrenches (to ANSI/ASTM B18.3) for Piston-Nut Set-<br />
Screws. Two Hex Wrenches are Consumed (Destroyed) with each Tightening of a<br />
Piston Nut. A quantity of hex wrenches needs to be kept on hand, considering the<br />
consumption during maintenance. Hex Allen-type-wrench sizes for piston-nut setscrews<br />
- nominal inch sizes:<br />
1. JGB:V:KBB:V 1/8.<br />
2. JGH:E:K:T 5/32.<br />
3. JGC:D:Z:U 3/16.<br />
• Tape Measure.<br />
• Flashlight.<br />
• Small Mirror on a Flexible Extension Rod.<br />
• Small Magnet on a Flexible Extension Rod.<br />
• Small Gas Torch.<br />
• Electric and/or Pneumatic Drill.<br />
• Twist Drill Set.<br />
• General Purpose Knife.<br />
• 1 - Medium and 1 - Large Ball-Peen Hammers.<br />
• Grease Gun.<br />
• Hacksaw.<br />
• Metal File Set.<br />
• Snap Ring Pliers.<br />
• Fine Grit Stone.<br />
•<br />
1 12 in. Machinist scale with 0.01 in. increments. Or metric (0.5 mm) increments.<br />
2<br />
• Calibrated, Button Dial Indicator with 0.001 in. increments and Needle Dial Indicator<br />
with 0.0005 in. increments, and magnetic base. Or metric (0.01 mm) increments.<br />
• Torque Multiplier Wrench and/or Hydraulic Torque Wrench.<br />
TABLE 7-1 SI METRIC CONVERSION<br />
MEASUREMENT CONVERSION<br />
Area<br />
• square inch or in 2 x 0.00064516 = meter 2 or m 2<br />
• square inch or in 2 x 6.4516 = centimeter 2 or cm 2<br />
PAGE 7 - 10 7/09
Change language