European Technical Catalogue 2009 - Pinmar

DVFR- 8 FILTER REGULATOR
COALESCER WITH ACTIVATED CARBON FILTER
High air flows for conventional and compliant spray guns
Provides air filtered to 0.01 microns suitable for air-fed
respiratory outfits
Activated carbon filter removes oil carry over to 0.003 ppm
Maximum airflow of 3500 l/min (124cfm)
Suitable for use in booth/oven up to 100°C (212°F)
Three ball valve controlled outlets
Rolling diaphragm gives rapid response and sensitive air
pressure control
Specification
Air Inlet Thread 1/2” BSP (F)
Regulated Outlets 3 Valved
Unregulated Outlets NA
Air Outlets (Ball Valves) 1/ 4” BSP (M)
Width (Overall) 305mm (12”)
Height (Overall) 280mm (11”)
Weight 3.3kg
Capacity (maximum air flow) 3500 l/min (124cfm)
Maximum Air Inlet Pressure 13 bar (189 psi)
Maximum Regulated Outlet Pressure 0-8 bar (0-116psi)
Maximum Operating Temperature 100°C (212°F)
Pressure Gauge 0-11 bar (0-160 psi)
Gauge port 1/8” BSP (F)
Air Filtration Down to 0.01 microns *
Drain Valve Semi-Automatic
Maximum Pressure Drop 10% of Inlet Pressure
* Suitable for Breathing Air
DVFR-8 Regulator
Part No Description
DVFR-8 3 Outlet Filter Regulator Coalescer with activated carbon filter
DV-9451705 Replacement 5 micron filter element for DVFR-8
DV-9451711 Replacement 0.01 micron fine filter breathing air element for DVFR-8
D Replacement 0.003 ppm activated carbon filter element for DVFR-8
DV-9420601 Filter bowl removal tool
Ref No Description Part Number
1 Upper Cover Assembly DV-9450806
2 Filter (Air) DV-9451705
3 Metal Filter Bowl DV-9453301-MET
4 Ball Valve SER-3414-MF
5 Pressure Gauge GA-319
6 Fine Filter (Oil) DV-9451711
7 Isolation Valve DV-8000035
8 Activated Carbon Filter DV-9451711AC
European Technical Catalogue 2009
DV-9451705
& DV-9451711
DV-9451711AC
Page 15