PLC Programming

4 - The Individual Components
How the status of an object resp. its handling in the data base is displayed in the Object Organizer :
Grey shaded icon:
Object is stored in the data base (source
control)
Green check in front of the object name:
Object is checked out in the currently opened
project.
Red cross in front of the object name:
Object is currently checked out by another
user.
behind object name:
The object can only be read, but not edited.
Please regard: some objects (Task
configuration, Sampling Trace, PLC
Configuration, Target Settings, Watch- and
Receipt Manager) are per default assigned
with a as long as they are not checked
out. This means that you will not automatically
be asked whether the object should be
checked out, as soon as you start to edit the
object; it not necessarily means that you
cannot edit the object. If there is no write
access then the command 'Check out' will not
be available.
Login
This command will open the dialog 'Login' where you can enter the access data for the ENI data base
via the ENI Server. The access data also have to be defined in the ENI Server (ENI Admin, User
Management) and – depending on the currently used data base – also in the user management of the
data base. After the command has been executed, first the Login dialog for category 'Project objects'
will open.
CoDeSys V2.3 4-35