PLC Programming

Errors
Special timer/counter commands are not convertable into IEC 61131-3.
4409
"Contents of ACCU1 or ACCU2 undefined, not convertible into IEC 61131-3."
A command, which connects the both accus, cannot be converted, because the accu values are not
defined.
4410
4411
4412
4413
4414
4415
4416
4417
4418
4419
"Called POU not in project."
Import the called POU.
"Error in global variable list."
Please check the SEQ file.
"Internal error no.11"
Please contact the PLC manufacturer.
"Error in format of line in data block"
In the code which should be imported there is an errouneous date.
"FB/FX name missing."
In the original S5D file the symbolic name of an (extended) POU is missing.
"Instruction after block end not allowed."
A protected POU cannot get imported.
"Invalid command"
The S5/S7 command´cannot be disassembled.
"Comment not closed"
Close the comment with "*)".
"FB/FX-Name too long (max. 8 characters)"
The symbolic name of an (extended) POU is to long.
"Expected format of line ""(* Name: *)"" "
Correct the line correspondingly.
10-130 CoDeSys V2.3