PLC Programming

Appendix H: Target Settings Dialogs in Detail
called by reference (pointer); therefore no constants can be
assigned and no read/write access is possible from outside the
function block.
Initialize Inputs
Automatic boot project load
Softmotion
if not activated: For optimizing reasons no init code will be
generated for the inputs declared with "AT %IX" (-> undefined
values until the 1. bus cycle !)
if activated: A boot project is created automatically after
download of a new program and sent to the PLC.
if activated: The SoftMotion functionality is activated, i.e.
available in the Resources tab (CNC program list, CAMs)
10.21.3 Target Settings in Category Networkfunctionality
The items described for this tab can be available for each standard target.
Dialog Target Settings, Networkfunctionality
Dialog item
Support parameter manager
Support network variables
Names of supported
networkinterfaces
Index ranges for parameter
SDOs
Index-ranges for variable
SDOs
Subindex range
Meaning
If activated: the entry 'Parameter-Manager' appears in the
Resources tab. Use it to create an Object Dictionary for variables and
parameters, which enable the targeted, active data exchange with
other controllers
If this option is selected network variables can be used, which
enable automatic data exchange in the network
List of the supported network systems, e.g.: CAN; UDP; DP
Index Range for Parameter Object Dictionaries (see
Resources, 'OD Editor')
Index Range for Variables Object Dictionaries (see
Resources, 'OD Editor')
Subindex Range within the above mentioned index ranges for
parameter and variable Object Dictionaries (see Resources,
'OD Editor')
CoDeSys V2.3 10-91