PLC Programming

Parameter Manager
Now close the template and insert a parameter list which is of type 'Instance'. Choose template "fubo_template".
Insert the Base variable "inst1_fubo". Define a Base index of e.g. 16#2300 and a Base subindex of 30 (you must
regard the ranges defined in the target settings in tab Networkfunctionality !). Now press Apply to get displayed
the indices which are calculated for the componentes a, b, c by the addition of base offsets and template
defined offsets: Indices: 16#2301, 16#2302, 16#2303; SubIndices:16#23, 16#33, 16#43.
6.11.4 Editing parameter lists
Insert list
Shortcut: Ins
To insert a new parameter list in the Parameter Manage use the command 'Insert list...', resp. 'Insert
new list' in the 'Insert' or context menu. The commands are available when the focus is in the empty
navigation window resp. on an already existing entry in the navigation tree.
The dialog 'Insert list' opens:
Dialog 'Insert list'
Insert a Name for the new parameter list (must be unique within the list type) and choose one of the
following list types:
Variables
Parameters
Template
Instance
System parameters
Entries for process variables
Entries for constant parameters, whose values remain
unattached by the process
Template of attribut setting for the components of a
functionblock or a structure
Entries for variables of type of a functionbolck or a
structure, basing on the corresponding template (see
above)
Entries for parameters whose values are not attached by
the process and which are defined by the target system
After confirming the settings and closing the dialog with OK the new parameter list will appear as an
entry in the navigation window, the list type beeing indicated by the icon. In the table editor the
appropriate attributes will be displayed as column titles. Selection and order of the columns are
6-54 CoDeSys V2.3