SAFETY MANUAL - Tuv-fs.com
SAFETY MANUAL - Tuv-fs.com SAFETY MANUAL - Tuv-fs.com
SAFETY MANUAL 3.2.1 Safety-Related Configurations TMR Processor 8110 TÜV Certified Configuration 2oo3 Conditions Certified as safety-related and can be used for safety-critical applications in SIL 3 or AK6 in single module or active/standby configurations. TMR Processor 2oo3 8110B (IRIG-B) TMR Interface 8160 2oo3 Certified as safety-related and can be used for safety-critical applications in SIL 3 or AK6 in single module or active/standby configurations. IRIG-B functionality is interference free and can not be used for safety functions Certified as safety-related and can be used for safety-critical applications in AK5 in single module or active/standby configurations. Communication Interface 8150 / 8151 / 8151B Expander Modules, (XIM / XPM) 8310 / 8311 Fiber TX/RX Unit 8314 Not safety related but interference free Not safety related but interference free 2oo3 Not safety related but interference free 2oo3 Certified as non-interfering safety-related and can be used for safety-critical communication in SIL 3 or AK6 as part of the grey channel in single or dual module configurations. Certified as non-interfering safety-related and can be used for safety-critical communication in SIL 3 or AK6 as part of the grey channel in single module or master/slave configurations. Certified as non-interfering safety-related and can be used for safety-critical communication in SIL 3 or AK6. Table 1 - Central Modules Doc No P8094 Page 38 of 67 Issue 14 September 2003
SAFETY MANUAL Digital Inputs 8403, Triplicated, 24 VDC 8423, Triplicated, 120VDC Digital Inputs 8402, Dual, 24 VDC Analog Inputs 8431, Triplicated 8433, Triplicated, isolated Analog Inputs 8432, Dual TÜV Certified Configuration Internal 2oo3 (2oo3 implemented in a single module) Internal 1oo2D (1oo2 implemented in a single module) Internal 2oo3 (2oo3 implemented in a single module) Internal 1oo2D (1oo2 implemented in a single module) Conditions Normally energized (de-energize to trip): certified SIL 3 or AK6. Normally de-energized (energize to trip): certified only for applications that fulfil the requirements under section 3.2.4. Normally energized (de-energize to trip): certified SIL 3 or AK6. Normally de-energized (energize to trip): certified only for applications that fulfil the requirements under section 3.2.4. Time-limited operation in degraded mode Within the manufactures specified safety accuracy limits. The safety state of the analogue input has to be defined to 0 mA/0 V Certified SIL 3 or AK6. Within the manufactures specified safety accuracy limits. The safety state of the analogue input has to be defined to 0 mA/0 V Time-limited operation in degraded mode. Certified: SIL 3 or AK6 Table 2 - Input Modules High Density I/O Digital Outputs 8451, Triplicated 24 VDC 8471, Triplicated 120VDC 8461, Triplicated 48VDC Analog Outputs 8480 Analog Output 4-20 mA TÜV Certified Configuration Internal 2oo3 (2oo3 implemented in a single module) Not safety related but interference free Conditions Normally energized (de-energize to trip): certified SIL 3 or AK6. Normally de-energized (energize to trip): certified only for applications that fulfil the requirements under section 3.2.4. May be used in single module or master/slave configurations. Certified as non-interfering and can be used for nonsafety-critical output devices. Table 3 - Output Modules High Density I/O Doc Number P8094 Issue 14 September 2003 Page 39 of 67
- Page 1: 8000 SERIES TMR SYSTEM SAFETY MANUA
- Page 4 and 5: SAFETY MANUAL This page intentional
- Page 6 and 7: SAFETY MANUAL NOTICE The content of
- Page 8 and 9: SAFETY MANUAL RADIO FREQUENCY INTER
- Page 10 and 11: SAFETY MANUAL ABBREVIATIONS 1-oo-2
- Page 12 and 13: SAFETY MANUAL elements disagree. DR
- Page 14 and 15: SAFETY MANUAL similar to the simple
- Page 16 and 17: SAFETY MANUAL RS-232C, RS-422, RS-4
- Page 18 and 19: SAFETY MANUAL 8000 Series Certified
- Page 20 and 21: SAFETY MANUAL 3.11.6 Program Testin
- Page 22 and 23: SAFETY MANUAL 1. INTRODUCTION 1.1 P
- Page 24 and 25: SAFETY MANUAL 1.3.1 Safety and Func
- Page 26 and 27: SAFETY MANUAL The additional elemen
- Page 28 and 29: SAFETY MANUAL The TMR architecture
- Page 30 and 31: SAFETY MANUAL 2.2.1 Safety Lifecycl
- Page 32 and 33: SAFETY MANUAL Tools used within the
- Page 34 and 35: SAFETY MANUAL 2.2.1.9 Safety System
- Page 36 and 37: SAFETY MANUAL • Method of detecti
- Page 38 and 39: SAFETY MANUAL 2.3.1 Competency The
- Page 42 and 43: SAFETY MANUAL Pulse Generator 8444,
- Page 44 and 45: SAFETY MANUAL 3.2.2 High-Density I/
- Page 46 and 47: SAFETY MANUAL 3.2.3 Analog Input Sa
- Page 48 and 49: SAFETY MANUAL 3.2.7 NFPA 86 Require
- Page 50 and 51: SAFETY MANUAL shall be provided for
- Page 52 and 53: SAFETY MANUAL 3.4 ACTUATOR CONFIGUR
- Page 54 and 55: SAFETY MANUAL 3.6.1.2 Composite Sca
- Page 56 and 57: SAFETY MANUAL Power Fail Timeout (P
- Page 58 and 59: SAFETY MANUAL • Access to the wor
- Page 60 and 61: SAFETY MANUAL 3.11.1 IEC1131 Workbe
- Page 62 and 63: SAFETY MANUAL 3.11.3 Testing of New
- Page 64 and 65: SAFETY MANUAL 3.11.4 Application De
- Page 66 and 67: SAFETY MANUAL Where the interaction
- Page 68 and 69: SAFETY MANUAL In addition to Normal
- Page 70 and 71: SAFETY MANUAL 1ºF/min Table 8 - Cl
- Page 72 and 73: SAFETY MANUAL 2. Alternatively, the
- Page 74 and 75: SAFETY MANUAL 4. CHECKLISTS This se
- Page 76 and 77: SAFETY MANUAL Description Reference
- Page 78 and 79: SAFETY MANUAL Description Reference
- Page 80 and 81: SAFETY MANUAL 4.2.4 High Density Mo
- Page 82 and 83: SAFETY MANUAL 5. PREVIOUSLY ASSESSE
<strong>SAFETY</strong> <strong>MANUAL</strong><br />
3.2.1 Safety-Related Configurations<br />
TMR Processor<br />
8110<br />
TÜV Certified<br />
Configuration<br />
2oo3<br />
Conditions<br />
Certified as safety-related and can be used for<br />
safety-critical applications in SIL 3 or AK6 in single<br />
module or active/standby configurations.<br />
TMR Processor<br />
2oo3<br />
8110B (IRIG-B)<br />
TMR Interface<br />
8160 2oo3<br />
Certified as safety-related and can be used for<br />
safety-critical applications in SIL 3 or AK6 in single<br />
module or active/standby configurations.<br />
IRIG-B functionality is interference free and can not<br />
be used for safety functions<br />
Certified as safety-related and can be used for<br />
safety-critical applications in AK5 in single module<br />
or active/standby configurations.<br />
Communication<br />
Interface<br />
8150 / 8151 / 8151B<br />
Expander Modules,<br />
(XIM / XPM)<br />
8310 / 8311<br />
Fiber TX/RX Unit<br />
8314<br />
Not safety related but<br />
interference free<br />
Not safety related but<br />
interference free<br />
2oo3<br />
Not safety related but<br />
interference free<br />
2oo3<br />
Certified as non-interfering safety-related and can<br />
be used for safety-critical <strong>com</strong>munication in SIL 3 or<br />
AK6 as part of the grey channel in single or dual<br />
module configurations.<br />
Certified as non-interfering safety-related and can<br />
be used for safety-critical <strong>com</strong>munication in SIL 3 or<br />
AK6 as part of the grey channel in single module or<br />
master/slave configurations.<br />
Certified as non-interfering safety-related and can<br />
be used for safety-critical <strong>com</strong>munication in SIL 3 or<br />
AK6.<br />
Table 1 - Central Modules<br />
Doc No P8094 Page 38 of 67<br />
Issue 14 September 2003