Open Printable/Searchable Copy - Global Mapper

Global Mapper User's Manual
♦ DXF - export to an AutoCAD DXF format file.
♦ GARMIN_TRK - exports lines to a Garmin TRK (PCX5) format file.
♦ GARMIN_WPT - exports names points to a Garmin WPT (PCX5) format file.
♦ GEOJSON - exports area, line, and point features to a GeoJSON (JavaScript Object Notation)
file.
♦ GPX - exports line and point features to a GPX (GPS eXchange Format) file.
♦ INROADS - exports to the InRoads ASCII format.
♦ KML - export to a KML or KMZ format file.
♦ LANDMARK_GRAPHICS - export to a Landmark Graphics format file.
♦ LIDAR_LAS - export to a Lidar LAS file.
♦ LOWRANCE_USR - export to a Lowrance USR format file.
♦ MAPGEN - export to a MapGen format file.
♦ MAPINFO - export to a MapInfo MIF/MID or TAB/MAP format file.
♦ MATLAB - export to a MatLab format file.
♦ MOSS - export line and area features to a MOSS format file.
♦ NIMA_ASC - export to a NIMA ASC format file.
♦ PLATTE_RIVER - export to a Platte River ASCII Digitizer format file.
♦ POLISH_MP - export to a Polish MP format file.
♦ SEGP1 - export to a SEGP1 format file.
♦ SHAPEFILE - export to an ESRI Shapefile format file.
♦ SIMPLE_ASCII - export to a simple ASCII text file.
♦ SOSI - exports area, line, and point features to a SOSI (Norwegian Data) file.
♦ SURFER_BLN - export to a Surfer BLN format file.
♦ SVG - export to a Scalable Vector Graphic (SVG) format file.
♦ TSUNAMI_OVR - export to a Tsunami OVR format file.
♦ WASP_MAP - export to a WAsP .map format file (line features only).
♦ ZMAP_ISOMAP_LINE - export to a ZMap+ IsoMap Line format file (line features only).
♦ ZMAP_XYSEGID - export to a ZMap+ XYSegId format file (area and line features only).
• GLOBAL_BOUNDS - specifies the export bounds in units of the current global projection. There
should be 4 values in a comma-delimited list following the parameter name. The values should be in
order of minimum x, minimum y, maximum x, maximum y.
• GLOBAL_BOUNDS_SIZE - specifies the export bounds in units of the current global projection.
There should be 4 values in a comma-delimited list following the parameter name. The values should
be in order of minimum x, minimum y, width in x, width in y.
• LAT_LON_BOUNDS - specifies the export bounds in latitude/longitude degrees. There should be 4
values in a comma-delimited list following the parameter name. The values should be in order of
westmost longitude, southernmost latitude, easternmost longitude, northernmost latitude.
• LAYER_BOUNDS - specifies that the export should use the bounds of the loaded layer(s) with the
given filename. For example, to export to the bounds of the file "c:\test.tif", you would use
LAYER_BOUNDS="c:\test.tif". Keep in mind that the file must be currently loaded.
• LAYER_BOUNDS_EXPAND - specifies that the operation should expand the used
LAYER_BOUNDS bounding box by some amount. The amount to expand the bounding rectangle by
should be specified in the current global projection. For example, if you have a UTM/meters
projection active and want to expand the bounds retrieved from the LAYER_BOUNDS parameter by
100 meters on the left and right, and 50 meters on the top and bottom, you could use
LAYER_BOUNDS_EXPAND="100.0,50.0". You can also specify a single value to apply to all 4
sides, or supply 4 separate values in the order left,top,right,bottom.
• SAVE_GRID_LINES - specifies that if grid line display is enabled that the grid lines should be saved.
Specify SAVE_GRID_LINES=NO to disable this option. If it's not specified the the grid lines will be
saved if enabled.
Table of Contents 270