Open Printable/Searchable Copy - Global Mapper

fits in a single tile. To change this to making each layer 1/3rd the resolution of the previous one, use
KML_ZOOM_SCALE_FACTOR=3.
• ADD_OVERVIEW_LAYERS (ERDAS only) - specifies that overview (pyramid) layers should be
generated for the export. Use ADD_OVERVIEW_LAYERS=YES to enable.
• BLOCK_SIZE (ERDAS only) - specifies the block size to use for the export. The default is
BLOCK_SIZE=64.
• COMPRESS_OUTPUT (ERDAS only) - specifies whether or not the exported file should be
compress. The default is COMPRESS_OUTPUT=YES.
• DISABLE_BIGTIFF (GEOTIFF only) - use to disable the automatic creation of BigTIFF-format files
for very large exports. Use DISABLE_BIGTIFF=YES to disable the automatic BigTIFF support.
• TIFF_COPYRIGHT (GEOTIFF only) - specify text to store in TIFFTAG_COPYRIGHT tag.
• TIFF_DATETIME (GEOTIFF only) - specify text to store in TIFFTAG_DATETIME tag.
• TIFF_DOC_NAME (GEOTIFF only) - specify text to store in TIFFTAG_DOCUMENTNAME tag.
• TIFF_GT_CITATION (GEOTIFF only) - specify text to store in GeoTIFF GTCitationGeoKey
GeoTIFF tag.
• TIFF_IMAGE_DESC (GEOTIFF only) - specify text to store in TIFFTAG_IMAGEDESCRIPTION
tag.
• TIFF_PCS_CITATION (GEOTIFF only) - specify text to store in GeoTIFF PCSCitationGeoKey
GeoTIFF tag.
• TIFF_NO_GTIFF_HEADER (GEOTIFF only) - don't embed a GeoTIFF header in the file. Use
TIFF_NO_GTIFF_HEADER=YES to disable write of header.
• COORD_DELIM (XY_COLOR only) - specifies the delimeter between coordinates
♦ COMMA - coordinates are separated by commas
♦ SEMICOLON - coordinates are separated by semicolons
♦ SPACE - coordinates are separated by space characters
♦ TAB - coordinates are separated by tab characters
• USE_BAND4_AS_ALPHA (ECW only) - specifies that the ECW file should store values from the
4th band of loaded layers to the alpha channel rather than using the alpha channel as on/off values.
Use USE_BAND4_AS_ALPHA=YES to enable. This is an advanced option that allows some
rudimentary multi-band ECW support.
EXPORT_VECTOR
Global Mapper User's Manual
The EXPORT_VECTOR command exports all currently loaded vector data to a file. The following
parameters are supported by the command.
• FILENAME - full path to file to save the data to
• TYPE - type of vector file we're exporting to
♦ ANUDEM_CONTOUR - export lines with elevation to an AnuDEM contour .gen format file.
♦ ARC_UNGENERATE - export line and area features to an Arc Ungenerate format file.
♦ ARC_UNGENERATE_POINTS - export point features to an Arc Ungenerate format file.
♦ CDF - export to a Geographix CDF format file.
♦ CSV - export point features to a CSV format file.
♦ DELORME_DRAWING - export features to a DeLorme drawing text file
♦ DELORME_TRACK - export line features to a DeLorme track text file
♦ DELORME_WAYPOINT - export point features to a DeLorme waypoint text file
♦ DGN - export to a DGN v8 file.
♦ DLGO - export to a native format USGS DLG-O file.
♦ DWG - export to an AutoCAD DWG format file.
Table of Contents 269