Map GPS Coordinates - GPS Map Coordinates ... - Global Mapper

Global Mapper User's Manual
♦ WASP_MAP - export to a WAsP .map format file (line features only).
♦ ZMAP_XYSEGID - export to a ZMap+ XYSegId format file (area and line features only).
• GLOBAL_BOUNDS - specifies the export bounds in units of the current global projection. There
should be 4 values in a comma-delimited list following the parameter name. The values should be in
order of minimum x, minimum y, maximum x, maximum y.
• GLOBAL_BOUNDS_SIZE - specifies the export bounds in units of the current global projection.
There should be 4 values in a comma-delimited list following the parameter name. The values should
be in order of minimum x, minimum y, width in x, width in y.
• LAT_LON_BOUNDS - specifies the export bounds in latitude/longitude degrees. There should be 4
values in a comma-delimited list following the parameter name. The values should be in order of
westmost longitude, southernmost latitude, easternmost longitude, northernmost latitude.
• LAYER_BOUNDS - specifies that the export should use the bounds of the loaded layer(s) with the
given filename. For example, to export to the bounds of the file "c:\test.tif", you would use
LAYER_BOUNDS="c:\test.tif". Keep in mind that the file must be currently loaded.
• LAYER_BOUNDS_EXPAND - specifies that the operation should expand the used
LAYER_BOUNDS bounding box by some amount. The amount to expand the bounding rectangle by
should be specified in the current global projection. For example, if you have a UTM/meters
projection active and want to expand the bounds retrieved from the LAYER_BOUNDS parameter by
100 meters on the left and right, and 50 meters on the top and bottom, you could use
LAYER_BOUNDS_EXPAND="100.0,50.0". You can also specify a single value to apply to all 4
sides, or supply 4 separate values in the order left,top,right,bottom.
• QUAD_NAME (DLGO only) - specifies the quadrangle name to store in the header of the DLG-O
file. If not quadrangle name is specified, Global Mapper will attempt to automatically determine one
based on the loaded data.
• EXPORT_DWG_LABELS (DWG only) - specifies that object labels will be exported as attributes in
the DWG file. Typically you want to set this to YES, unless you are working with a software package
that cannot handle DWG files with attributes. Leaving out this parameter or setting it to anything but
YES will cause feature labels to be discarded on export.
• EXPORT_DXF_LABELS (DXF only) - specifies that object labels will be exported as attributes in
the DXF file. Typically you want to set this to YES, unless you are working with a software package
that cannot handle DXF files with attributes. Leaving out this parameter or setting it to anything but
YES will cause feature labels to be discarded on export.
• DWG_TEXT_SIZE (DWG only) - specifies the multiplier value to apply to text sizes when exporting
DWG file. Use this to control how large text is in the exported file.
• DXF_TEXT_SIZE (DXF only) - specifies the multiplier value to apply to text sizes when exporting
DXF file. Use this to control how large text is in the exported file.
• SHAPE_TYPE (SHAPEFILE only) - specifies the vector object type (area, line, or point) to export to
the shapefile. The following values are valid:
♦ AREAS - export area features to the Shapefile
♦ LINES - export line features to the Shapefile
♦ POINTS - export point features to the Shapefile
• GEN_PRJ_FILE - specifies that a projection (PRJ) file should be generated in addition to the output
file. Set this to YES to cause the projection file to be generated. Leaving out this parameter or setting
it to anything but YES will cause no PRJ file to be generated.
• GRID_TYPE_CELL_SIZE - specifies that the export should be gridded into multiple tiles with each
tile having the given size in the export projection. The value should be specified as cell width,cell
height. For example, if you are exporting in a metric projection and want to tile the export into cells
that are 10,000 meters wide by 5,000 meters tall, you would use
GRID_TYPE_CELL_SIZE="10000.0,5000.0".
• GRID_TYPE_ROWS_COLS - specifies that the export should be gridded into multiple tiles with a
given number of rows and columns of tiles. The value should be specified as number of rows,number
Map GPS Coordinates - GPS Map Coordinates - GPSCoordinates Map 231