Map GPS Coordinates - GPS Map Coordinates ... - Global Mapper

Start Tracking GPS
The Start Tracking GPS option causes Global Mapper to look for a GPS device attached on the configured
serial port (see the Setup command) and to start displaying the location of the GPS device, if found, in the
Global Mapper display window.
If a GPS device is found which has a valid GPS fix, you will see a triangular vessel appear in the Global
Mapper view at the location reported by the GPS device. The vessel will point in the current direction of
travel, as reported by the GPS device.
Stop Tracking GPS
The Stop Tracking GPS command tells Global Mapper to stop tracking any connected GPS devices.
Keep the Vessel On-Screen
If the Keep the Vessel On-Screen option is checked, the main view will automatically pan when the GPS
vessel approaches the edge of the view to keep the vessel in the view.
Mark Waypoint
Global Mapper User's Manual
Map GPS Coordinates - GPS Map Coordinates - GPSCoordinates Map 198