Stopwatch and Timer Calibrations - National Institute of Standards ...

Stopwatch and Timer Calibrations
[13] M. A. Lombardi, “NIST Time and Frequency Services,” Natl. Inst. Stand.
Technol. Special Publication 432, 71 p., January 2002.
[14] International Telecommunications Union (ITU), “One-way Transmission Time,”
ITU Recommendation G.114, May 2003.
[15] International Telecommunications Union (ITU), “The Control of Jitter and
Wander within Digital Networks Which are Based on the 1544 kbit/s Hierarchy,” ITU
Recommendation G.824, March 2000.
[16] D. W. Allan, D. D. Davis, J. Levine, M. A. Weiss, N. Hironaka, and D. Okayama,
“New Inexpensive Frequency Calibration Service from NIST,” Proc. 1990 IEEE Freq.
Cont. Symp., pp. 107-116, May 1990.
[17] S. D. Phillips, K. R. Eberhardt, “Guidelines for Expressing the Uncertainty of
Measurement Results Containing Uncorrected Bias,” Natl. Inst. Stand. Technol. J.
Res., 102(5): 577-585, September-October 1997.
[18] J. R. Vig and T. R. Meeker, “The Aging of Bulk Acoustic Wave Resonators,
Filters, and Oscillators,” Proc. 1991 IEEE Freq. Cont. Symp., pp. 77-101, May 1991.
[19] IEEE, “IEEE Standard Definitions of Physical Quantities for Fundamental
Frequency and Time Metrology - Random Instabilities,” IEEE Standard 1139-1999,
March 1999.
68