Accessories
Accessories
Accessories
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>Accessories</strong>
At a glance<br />
2<br />
KEL-VERA<br />
Our objective of continuous further development<br />
has resulted in this modern,<br />
visionary concept. The newly-designed<br />
hydrostatic guideways satisfy the highest<br />
demands, both in universal use and production<br />
grinding.<br />
KEL-VARIA<br />
These CNC cylindrical grinding machines have<br />
been developed to meet the most stringent<br />
quality requirement. Exhaustive application<br />
studies and the use of state-of-the-art instruments<br />
for development and in manufacturing<br />
have resulted in this universal modular design.<br />
KEL-VIVA<br />
These CNC universal cylindrical grinding<br />
machines – designed as application-orientated<br />
package machines – satisfy the highest<br />
levels of accuracy and quality. For demanding<br />
customers, their especially attractive<br />
price will come as a pleasant surprise.<br />
KEL-VISTA<br />
KEL-VISTA: The machine range with the<br />
best possible view on the machining process.<br />
It is innovative, ergonomic when it comes<br />
to set-ups and operation and most costeffective.<br />
KEL-VITA<br />
The latest Kellenberger CNC-Universal<br />
Grinding Machine with linear glass scales<br />
as standard on X- and Z-axes with the<br />
GEFanuc 310is control are together a powerful<br />
performance pachage. Just perfect.
Contents<br />
3<br />
CNC control system/PC software and hardware 4<br />
Wheelhead equipment and accessories 6<br />
Internal grinding spindles and accessories 7<br />
Workhead and accessories 15<br />
Tailstock and accessories 16<br />
Manual workholding devices 17<br />
Power-actuated clamping devices 20<br />
Steady rests and workpieces supports 22<br />
Dressing devices, accessories and tools 24<br />
Measuring systems and Gap control units 29<br />
Coolant fi lter units and accessories 31<br />
Miscellaneous assessories 34<br />
Documentation 35<br />
Services and Courses 36
CNC control system/PC software and hardware<br />
KEL-VERA<br />
KEL-VARIA<br />
KEL-VIVA<br />
KEL-VISTA<br />
KEL-VITA<br />
4<br />
4025.08 Flash Card 128 MB<br />
Required to store and save KEL-EASY programms.<br />
Additional possibility to save ISO-programms through interface<br />
RS 232.<br />
Inkl. PCMCIA-Adapter.<br />
<br />
10110.01 KEL-ASSIST 100<br />
<br />
Software package supporting creation of profi le dressing and<br />
contour grinding programs.<br />
Includes: Win-Wop and Vektor-CAD.<br />
10110.02 Threading module for KEL-ASSIST 100<br />
<br />
An extension module supporting creation of programs for<br />
dressing of standard metric threads according to ISO 68 / DIN 13,<br />
inch threads according to UN and special threads.<br />
Not useable in combination with KEL-THREAD.<br />
10110.03 DXF module for KEL-ASSIST 100<br />
<br />
DXF interface and software extension for CAD data import.<br />
10110.04 KEL-THREAD, standard threads<br />
<br />
Software package supporting creation of programs for dressing of<br />
standard metric threads according to ISO 68 / DIN 13 and inch<br />
threads according to UN.
KEL-VERA<br />
KEL-VARIA<br />
KEL-VIVA<br />
KEL-VISTA<br />
KEL-VITA<br />
10110.05 KEL-POLY, out of round grinding<br />
Software package supporting creation of programs for any<br />
non-cylindrical contours such as excenters, polygons, ellipses and<br />
other progressively changing contours.<br />
DXF interface for CAD data import.<br />
<br />
5<br />
10110.07 KEL-EDIT for CNC control of GRINDplusIT<br />
<br />
GRINDplusIT off-line programming desk includs:<br />
Keyboard TE 530L & specifi c softkey buttons<br />
Data cable for RS 232 interface<br />
Systemsoftware on CD<br />
10120.00 Telediagnosis KEL-REMOTE for CNC control<br />
GRINDplusIT for digital phone line<br />
<br />
A hardware and software package supporting external access of<br />
KELLENBERGER to customer’s CNC. Access to the control is<br />
possible only with customer’s permission.<br />
10120.01 Telediagnosis KEL-REMOTE for CNC control<br />
GRINDplusIT for analogue phone line<br />
<br />
A hardware and software package supporting external access of<br />
KELLENBERGER to customer’s CNC. Access to the control is<br />
possible only with customer’s permission.<br />
10120.04 Telediagnosis KEL-REMOTE for CNC control<br />
GE FANUC 310is for digital phone line<br />
<br />
A hardware and software package supporting external access of<br />
KELLENBERGER to customer’s CNC. Access to the control is<br />
possible only with customer’s permission.<br />
10120.05 Telediagnosis KEL-REMOTE for CNC control<br />
GE FANUC 310is for analogue phone line<br />
<br />
A hardware and software package supporting external access of<br />
KELLENBERGER to customer’s CNC. Access to the control is<br />
possible only with customer’s permission.
Wheelhead equipment and accessories<br />
KEL-VERA<br />
KEL-VARIA<br />
KEL-VIVA<br />
KEL-VISTA<br />
KEL-VITA<br />
6<br />
10600.03 Grinding wheel flange dia.127 mm<br />
Including on outside balancing segments<br />
for grinding wheels dia. 300 –400 mm.<br />
Centering bore 127 mm.<br />
Clamping range 22–63 mm.<br />
<br />
10600.05 Grinding wheel flange dia.203.2 mm<br />
<br />
Including on outside balancing segments<br />
for grinding wheels dia. 450–500 mm.<br />
Centering bore 203.2 mm.<br />
Clamping range 25–80 mm.<br />
10600.06 Grinding wheel flange for additional grinding tool<br />
<br />
Including on outside balancing segments<br />
for grinding wheels dia. 300–400 mm.<br />
Centering bore 127 mm.<br />
Clamping range 18–48 mm.<br />
Cone 50 mm.<br />
10620.01 Balancing device<br />
<br />
For static balancing of grinding wheels.<br />
(for grinding wheels up to dia. 500 mm)
Internal grinding spindles and accessories<br />
KEL-VERA<br />
KEL-VARIA<br />
KEL-VIVA<br />
KEL-VISTA<br />
KEL-VITA<br />
4013.01 Belt-driven, high-performance internal<br />
and face grinding spindle REN 828<br />
<br />
7<br />
Running on sealed hybrid bearings.<br />
Revolution speed range 8‘500 –28‘000 r.p.m.<br />
Suitable for bore dia. >20 mm.<br />
Including pulleys and belts.<br />
4013.02 Belt-driven, high-performance internal<br />
and face grinding spindle REN 842<br />
<br />
Running on sealed hybrid bearings.<br />
Revolution speed range 12‘500 –42‘000 r.p.m.<br />
Suitable for bore dia. 6–30 mm.<br />
Including pulleys and fl at belts.<br />
4013.03 Belt-driven, high-performance internal<br />
and face grinding spindle REN 860<br />
<br />
Running on sealed hybrid bearings.<br />
Revolution speed range 17‘500 –60‘000 r.p.m.<br />
Suitable for bore dia. 3 –20 mm.<br />
Including pulleys and fl at belts.<br />
10700.20 Belt-driven internal grinding spindle HJN 828<br />
<br />
With hybrid bearings.<br />
Speed range 9000 to 28000 r.p.m.<br />
Suitable for bores dia. > 20 mm.<br />
Including pulleys and V-belts.<br />
Available only in combination with the appropriate operating unit.<br />
10700.22 Belt-driven internal grinding spindle HJN 842<br />
<br />
With hybrid bearings.<br />
Speed range 15000 to 42000 r.p.m.<br />
Suitable for bores dia. 6 –30 mm.<br />
Including pulleys and V-belts.<br />
Available only in combination with the appropriate operating unit.<br />
10700.24 Belt-driven internal grinding spindle HJN 860<br />
<br />
With hybrid bearings.<br />
Speed range 20000 to 60000 r.p.m.<br />
Suitable for bores dia. 3–20 mm.<br />
Including pulleys and V-belts.<br />
Available only in combination with the appropriate operating unit.
Internal grinding spindles and accessories<br />
KEL-VERA<br />
KEL-VARIA<br />
KEL-VIVA<br />
KEL-VISTA<br />
KEL-VITA<br />
8<br />
10700.32 Belt-driven internal grinding spindle REN 828<br />
With hybrid bearings.<br />
Speed range 9000 to 28000 r.p.m.<br />
Suitable for bores dia. > 20 mm.<br />
Including pulleys and V-belts.<br />
Available only in combination with the appropriate operating unit.<br />
<br />
10700.33 Belt-driven internal grinding spindle REN 842<br />
<br />
With hybrid bearings.<br />
Speed range 15000 to 42000 r.p.m.<br />
Suitable for bores dia. 6 –30 mm.<br />
Including pulleys and V-belts.<br />
Available only in combination with the appropriate operating unit.<br />
10700.34 Belt-driven internal grinding spindle REN 860<br />
<br />
With hybrid bearings.<br />
Speed range 20000 to 60000 r.p.m.<br />
Suitable for bores dia. 3 –20 mm.<br />
Including pulleys and V-belts.<br />
Available only in combination with the appropriate operating unit.<br />
10710.20 High frequency internal grinding spindle MFV 1230<br />
<br />
Speed range from 12000 to 30000 r.p.m.<br />
Suitable for bores dia. > 20 mm.<br />
Available only in combination with the appropriate operating unit.<br />
Internal quills type 28 are available as an option.<br />
10710.22 High frequency internal grinding spindle MFV 1260<br />
<br />
Speed range from 19500 to 60000 r.p.m.<br />
Suitable for bores dia. 3 –30 mm.<br />
Available only in combination with the appropriate operating unit.<br />
Internal quills type 42 are available as an option.<br />
10710.24 High frequency internal grinding spindle MFZ 1090<br />
<br />
<br />
Speed range from 45000 to 90000 r.p.m.<br />
Suitable for borings with dia. < 16 mm.<br />
Available only in combination with an appropriate operating unit.<br />
Spring collet clamping dia.12, clamping range 0.5 ... 7 mm.<br />
Including 2 spring collets dia. 3 mm and dia. 6 mm.
KEL-VERA<br />
KEL-VARIA<br />
KEL-VIVA<br />
KEL-VISTA<br />
KEL-VITA<br />
10710.30 High frequency internal grinding spindle MFM 1224/42<br />
<br />
<br />
9<br />
Speed range from 4‘050 to 42‘000 r.p.m.<br />
Suitable for bores dia. > 20 mm.<br />
Available only in combination with the appropriate operating unit.<br />
Internal quills type 21 are available as an option.<br />
10710.31 High frequency internal grinding spindle MFM 1242/60<br />
<br />
<br />
max. speed 60‘000 r.p.m.<br />
Suitable for bores dia. 3 –30 mm.<br />
Available only in combination with the appropriate operating unit.<br />
Internal quills type 28 are available as an option.<br />
10710.32 High frequency internal grinding spindle MFM 1290<br />
<br />
<br />
max. speed 90‘000 r.p.m.<br />
Suitable for bores dia. < 16 mm.<br />
Available only in combination with the appropriate operating unit.<br />
Internal quills type 50 are available as an option.
Internal grinding spindles and accessories<br />
KEL-VERA<br />
KEL-VARIA<br />
KEL-VIVA<br />
KEL-VISTA<br />
KEL-VITA<br />
10<br />
10721.00 Internal grinding quill HJND 21-1625<br />
<br />
<br />
Including 2 threaded bolts and 1 quill extension for sticking of<br />
grinding wheel.<br />
10721.01 Internal grinding quill HJND 21-1645<br />
<br />
<br />
10721.02 Internal grinding quill HJND 21-1665<br />
<br />
<br />
10721.03 Internal grinding quill HJND 21-2030<br />
<br />
<br />
10721.04 Internal grinding quill HJND 21-2060<br />
<br />
<br />
10721.05 Internal grinding quill HJND 21-2090<br />
<br />
<br />
10721.06 Internal grinding quill HJND 21-2535<br />
<br />
<br />
10721.07 Internal grinding quill HJND 21-2575<br />
<br />
<br />
10721.08 Internal grinding quill HJND 21-25115<br />
<br />
<br />
10721.09 Internal grinding quill HJND 21-3240<br />
<br />
<br />
10721.10 Internal grinding quill HJND 21-3290<br />
<br />
<br />
10721.11 Internal grinding quill HJND 21-32140<br />
<br />
<br />
10721.12 Internal grinding quill HJND 21-4050<br />
<br />
<br />
10721.13 Internal grinding quill HJND 21-40110<br />
<br />
<br />
10721.14 Internal grinding quill HJND 21-40170
KEL-VERA<br />
KEL-VARIA<br />
KEL-VIVA<br />
KEL-VISTA<br />
KEL-VITA<br />
10720.00 Internal grinding quill HJND 28-1220<br />
Including 2 threaded bolts and 1 quill extension for sticking of<br />
grinding wheel.<br />
10720.02 Internal grinding quill HJND 28-1235<br />
10720.04 Internal grinding quill HJND 28-1250<br />
10720.06 Internal grinding quill HJND 28-1625<br />
10720.08 Internal grinding quill HJND 28-1645<br />
10720.10 Internal grinding quill HJND 28-1665<br />
10720.12 Internal grinding quill HJND 28-2030<br />
10720.14 Internal grinding quill HJND 28-2060<br />
10720.16 Internal grinding quill HJND 28-2090<br />
10720.18 Internal grinding quill HJND 28-2535<br />
10720.20 Internal grinding quill HJND 28-2575<br />
10720.22 Internal grinding quill HJND 28-25115<br />
10720.24 Internal grinding quill HJND 42-716<br />
10720.26 Internal grinding quill HJND 42-725<br />
10720.28 Internal grinding quill HJND 42-736<br />
10720.30 Internal grinding quill HJND 42-918<br />
10720.32 Internal grinding quill HJND 42-930<br />
10720.34 Internal grinding quill HJND 42-945<br />
10720.36 Internal grinding quill HJND 42-1220<br />
10720.38 Internal grinding quill HJND 42-1235<br />
10720.40 Internal grinding quill HJND 42-1250<br />
10720.42 Internal grinding quill HJND 42-1625<br />
10720.44 Internal grinding quill HJND 42-1645<br />
10720.46 Internal grinding quill HJND 42-1665<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
11
Internal grinding spindles and accessories<br />
KEL-VERA<br />
KEL-VARIA<br />
KEL-VIVA<br />
KEL-VISTA<br />
KEL-VITA<br />
12<br />
10722.00 Internal grinding quill HJND 50-412<br />
<br />
<br />
Including 2 threaded bolts and 1 quill extension for sticking of<br />
grinding wheel.<br />
10722.01 Internal grinding quill HJND 50-418<br />
<br />
<br />
10722.02 Internal grinding quill HJND 50-424<br />
<br />
<br />
10722.03 Internal grinding quill HJND 50-514<br />
<br />
<br />
10722.04 Internal grinding quill HJND 50-520<br />
<br />
<br />
10722.05 Internal grinding quill HJND 50-528<br />
<br />
<br />
10722.06 Internal grinding quill HJND 50-716<br />
<br />
<br />
10722.07 Internal grinding quill HJND 50-725<br />
<br />
<br />
10722.08 Internal grinding quill HJND 50-736<br />
<br />
<br />
10722.09 Internal grinding quill HJND 50-918<br />
<br />
<br />
10722.10 Internal grinding quill HJND 50-930<br />
<br />
<br />
10722.11 Internal grinding quill HJND 50-945<br />
<br />
<br />
10722.12 Internal grinding quill HJND 50-1220<br />
<br />
<br />
10722.13 Internal grinding quill HJND 50-1235<br />
<br />
<br />
10722.14 Internal grinding quill HJND 50-1250
KEL-VERA<br />
KEL-VARIA<br />
KEL-VIVA<br />
KEL-VISTA<br />
KEL-VITA<br />
10720.48 Internal grinding quill HJND 60-412<br />
Including 2 threaded bolts and 1 quill extension for sticking of<br />
grinding wheel.<br />
10720.50 Internal grinding quill HJND 60-418<br />
10720.52 Internal grinding quill HJND 60-424<br />
10720.54 Internal grinding quill HJND 60-514<br />
10720.56 Internal grinding quill HJND 60-520<br />
10720.58 Internal grinding quill HJND 60-528<br />
10720.60 Internal grinding quill HJND 60-716<br />
10720.62 Internal grinding quill HJND 60-725<br />
10720.64 Internal grinding quill HJND 60-736<br />
10720.66 Internal grinding quill HJND 60-918<br />
10720.68 Internal grinding quill HJND 60-930<br />
10720.70 Internal grinding quill HJND 60-945<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
<br />
13<br />
10721.20 Face grinding quill HJNP 21<br />
<br />
<br />
Intended for clamping of face grinding wheels.<br />
Suitable for bores dia. > 100 mm.<br />
10720.72 Face grinding quill HJNP 28 for belt-driven internal<br />
grinding spindle 828<br />
<br />
Intended for clamping of face grinding wheels.<br />
Suitable for bores dia. > 100 mm.<br />
Including pulley (n = 5500 r.p.m.) and belts.<br />
10720.74 Face grinding quill HJNP 28<br />
<br />
Intended for clamping of face grinding wheels.<br />
Suitable for bores dia. > 100 mm.
Internal grinding spindles and accessories<br />
KEL-VERA<br />
KEL-VARIA<br />
KEL-VIVA<br />
KEL-VISTA<br />
KEL-VITA<br />
14<br />
10730.05 Spring collet chuck HJNZ 21<br />
<br />
<br />
Including 2 spring collets dia. 3 mm and dia. 6 mm.<br />
10730.00 Spring collet chuck HJNZ 28<br />
10730.02 Spring collet chuck HJNZ 42<br />
<br />
<br />
10730.06 Spring collet chuck HJNZ 50<br />
10730.04 Spring collet chuck HJNZ 60
Workhead and accessories<br />
KEL-VERA<br />
KEL-VARIA<br />
KEL-VIVA<br />
KEL-VISTA<br />
KEL-VITA<br />
4031.01 Sine bar attachment for direct angular fine<br />
setting using gauge blocks<br />
<br />
15<br />
Adjustment range for sine bar 0–35°.<br />
Fastening of stand at the front side of the wheel-head.<br />
Including: 1 cover and 1 conversion table<br />
Not included: stand and dial-gauge<br />
4031.02 Coolant supply through workhead spindle<br />
<br />
In combination with the manual drawbar from the<br />
standard equipment.<br />
10870.34 Backlash free driving flange<br />
<br />
The fl ange is used for driving the workpiece (e.g. for thread<br />
grinding, work with the C-axis or corresponding workholding<br />
systems to be mounted on).<br />
10870.60 Coolant supply through the workhead spindle<br />
<br />
Available only in combination with the pneumatic clamping device<br />
or the manual clamping tube from the standard accessories.<br />
Recommended accessories: Coolant switch-off system for table<br />
equipment.<br />
10880.00 Mobil hand panel<br />
<br />
It includes confi rmation key to release the axes in set-up mode<br />
(analog to the confi rmation key on the main panel). Additional<br />
push button to rotate the work spindle in jogging feed mode.
Tailstock and accessories<br />
KEL-VERA<br />
KEL-VARIA<br />
KEL-VIVA<br />
KEL-VISTA<br />
KEL-VITA<br />
16<br />
4030.05 Air-cushioning for easy tailstock repositioning<br />
Used for slight shifting of the tailstock on the longitudinal table.<br />
Available only in combination with the service unit for pneumatic<br />
auxiliary functions.<br />
<br />
10970.60 Spring preloaded centre pointe<br />
<br />
Suitable for clamping of light and slender workpieces. Prestressing<br />
of spring 5–60 N. Including two Morse 1 centres.<br />
Available only with a standard tailstock.<br />
10970.80 Air-cushioning for easy tailstock repositioning<br />
<br />
Used for slight shifting of the tailstock on the longitudinal table.<br />
Available only in combination with the service unit for pneumatic<br />
auxiliary functions.
Manual workholding devices<br />
KEL-VERA<br />
KEL-VARIA<br />
KEL-VIVA<br />
KEL-VISTA<br />
KEL-VITA<br />
11000.00 Three-jaw chuck, spiral type, size 160 mm<br />
Self-centering clamping, including 1 set of hardened jaws for<br />
internal and external clamping.<br />
Fixing taper cone DIN 55026, size 5.<br />
External clamping max. 160 mm.<br />
Internal clamping max. 150 mm.<br />
Permissible centering defl ection (radial run-out) 0.03 mm.<br />
<br />
17<br />
11000.02 Three-jaw chuck, spiral type, size 200 mm<br />
<br />
Self centering clamping, including 1 set of hardened jaws for<br />
internal and external clamping.<br />
Fixing taper DIN 55026, size 5.<br />
External clamping max. 200 mm.<br />
Internal clamping max. 190 mm.<br />
Permissible centering defl ection (radial run-out) 0.04 mm.<br />
11000.04 Three-jaw chuck, wedge-bar type, size 160 mm<br />
<br />
Self centering clamping, including 1 set of bidirectional hardened<br />
jaws for internal and external clamping.<br />
Fixing taper DIN 55026, size 5.<br />
External clamping max. 160 mm.<br />
Internal clamping max. 210 mm.<br />
Permissible centering defl ection (radial run-out) 0.015 mm.<br />
11000.06 Three-jaw chuck, wedge-bar type, size 200 mm<br />
<br />
Self centering, including 1 set of bidirectional hardened jaws for<br />
internal and external clamping.<br />
Fixing taper DIN 55026, size 5.<br />
External clamping max. 200 mm.<br />
Internal clamping max. 260 mm.<br />
Permissible centering defl ection (radial run-out) 0.015 mm.<br />
11010.00 Permanent magnetic chuck, size 150 mm<br />
<br />
Star-poles type.<br />
Fixing taper DIN 55026, size 5.<br />
Through hole 24 mm.<br />
11010.02 Permanent magnetic chuck, size 200 mm<br />
<br />
Star-poles type.<br />
Fixing taper DIN 55026, size 5.<br />
Through hole 30 mm.
Manual workholding devices<br />
KEL-VERA<br />
KEL-VARIA<br />
KEL-VIVA<br />
KEL-VISTA<br />
KEL-VITA<br />
18<br />
11010.04 Permanent magnetic chuck, size 300 mm<br />
star-poles type.<br />
Fixing taper DIN 55026, size 5.<br />
Through hole 58 mm.<br />
<br />
11020.00 Blank adapter flange, size 160 mm<br />
<br />
For mounting of chucks or to be used as a face plate.<br />
Fixing taper DIN 55026, size 5.<br />
11020.02 Blank adapter flange, size 200 mm<br />
<br />
For mounting of chucks or to be used as a face plate.<br />
Fixing taper DIN 55026, size 5.<br />
11020.04 Blank adapter flange, size 250 mm<br />
<br />
For mounting of chucks or to be used as a face plate.<br />
Fixing taper DIN 55026, size 5.<br />
11020.06 Blank adapter falnge, size 300 mm<br />
<br />
For mounting of chucks or to be used as a face plate.<br />
Fixing taper DIN 55026, size 5.<br />
11030.00 Spring collet adaptor for Schäublin B32<br />
<br />
In combination with the manual draw bar from standard<br />
accessories.
KEL-VERA<br />
KEL-VARIA<br />
KEL-VIVA<br />
KEL-VISTA<br />
KEL-VITA<br />
11030.02 Spring collet adaptor for Hardinge 5C<br />
In combination with the manual draw bar from standard<br />
accessories.<br />
<br />
19<br />
11030.10 Manually lever-operated collet attachment<br />
<br />
For use with Schäublin B32 or Hardinge 5C spring<br />
collets. Available only in combination with spring collet<br />
adapters item no. 11030.00 or 11030.02.<br />
11030.20 1 set of 59 spring collets Schäublin B32<br />
<br />
For dia. 1.0–30.0 mm.<br />
Gradation by 0.5 mm.<br />
Available only in combination with the manual draw bar and the<br />
spring collet adaptor for Schäublin B32.<br />
11030.22 1 set of 32 spring collets Hardinge 5C<br />
<br />
For dia. 1/16 – 1 1/16“.<br />
Gradation by 1/32“.<br />
Available only in combination with the manual draw bar and the<br />
spring collet adaptor for Hardinge 5C.<br />
11040.00 1 set of 8 work drivers<br />
<br />
Including box.<br />
Diameter range 5 –100 mm.
Power-actuated clamping devices<br />
KEL-VERA<br />
KEL-VARIA<br />
KEL-VIVA<br />
KEL-VISTA<br />
KEL-VITA<br />
20<br />
11110.10 3KCHP high-precision, three-jaw, power-actuated<br />
chuck, size 160 mm<br />
<br />
<br />
1 set of soft top jaws, 1 set of presetting rings for external clamping<br />
and 1 presetting ring for internal clamping.<br />
Jaws with ball-type positioning technology.<br />
Repeated precision 0.002 mm.<br />
External clamping max. 160 mm.<br />
Internal clamping max. 150 mm.<br />
Jaws stroke 2.5 mm.<br />
Clamping force 5‘000 –20‘000 N.<br />
Available only in combination with the pneumatic clamping device.<br />
11110.11 Set of Alu segmented jaws for 3KCHP three-jaw<br />
power-actuated chuck, size 160 mm<br />
<br />
<br />
1 set consisting of 3 jaws<br />
11110.12 Soft top jaws for 3KCHP three-jaw<br />
power-actuated chuck, size 160 mm<br />
<br />
<br />
1 set consisting of 3 jaws<br />
11110.16 Simultaneous chuck, size 160 mm<br />
<br />
<br />
For premachining of the soft top jaws. Available only in combination<br />
with the 3KCHP three-jaw, power-actuated chuck.<br />
11120.00 Work drivers, lateral-force free<br />
<br />
<br />
Clamping diameter 5 to 50 mm. Available only in combination with<br />
the 3KCHP three-jaw, power-actuated clamping chuck.
KEL-VERA<br />
KEL-VARIA<br />
KEL-VIVA<br />
KEL-VISTA<br />
KEL-VITA<br />
11140.00 Adaptor for spring collets according to DIN 6343<br />
<br />
<br />
21<br />
Adjustable axial backstop.<br />
No axial movement of spring collets.<br />
Bayonet joint to ensure quick replacement of spring collets.<br />
Available only in combination with pneumatic clamping device.<br />
11140.02 1 set of 41 spring collets according to DIN 6343<br />
<br />
<br />
For diameters 2.0 –42.0 mm.<br />
Gradation by 1.0 mm.<br />
Centering defl ection (radial run-out) < 0.02 mm.<br />
Available only in combination with pneumatic clamping device and<br />
spring collet adaptor for pressure spring collets according to<br />
DIN 6343.<br />
11140.04 1 set of 81 spring collets according to DIN 6343<br />
<br />
<br />
For diameters 2.0 - 42.0 mm.<br />
Gradation by 0.5mm.<br />
Centering defl ection (radial run-out) < 0.02 mm.<br />
Available only in combination with pneumatic clamping device and<br />
spring collet adaptor for pressure spring collets according to<br />
DIN 6343.
Steady rests and workpieces supports<br />
KEL-VERA<br />
KEL-VARIA<br />
KEL-VIVA<br />
KEL-VISTA<br />
KEL-VITA<br />
22<br />
11200.00 Two-jaw steady rest 5–80 mm<br />
Capacity dia. 5–80 mm, brass jaws.<br />
<br />
11200.20 1 set of brass jaws for two-jaw steady rest<br />
<br />
Spare jaws<br />
11200.22 1 set of carbide jaws for two-jaw steady rest<br />
<br />
11210.00 Tilting three-jaw steady rest, 3–120 mm<br />
<br />
Capacity dia. 3–120 mm, brass jaws.<br />
11210.02 Tilting three-jaw steady rest, 120–240 mm<br />
<br />
Capacity dia. 120–240 mm, brass jaws.<br />
11210.20 1 set of brass jaws for three-jaw steady rest<br />
<br />
Spare jaws.
KEL-VERA<br />
KEL-VARIA<br />
KEL-VIVA<br />
KEL-VISTA<br />
KEL-VITA<br />
11210.22 1 set of carbide jaws for three-jaw steady rest<br />
<br />
23<br />
11270.00 Workpiece supports<br />
<br />
1 set of 2 items, capacity dia. 10 –110 mm. Acceptable load up to<br />
150 kg.
Dressing devices, accessories and tools<br />
KEL-VERA<br />
KEL-VARIA<br />
KEL-VIVA<br />
KEL-VISTA<br />
KEL-VITA<br />
24<br />
11300.00 Dressing device, lower table mounted, on the<br />
tailstock side<br />
<br />
<br />
For dressing of external grinding wheels, consisting of:<br />
1 dressing arm,<br />
1 fi xed diamond holder for 8M multi-grain diamond (Free Cut),<br />
2 multi-grain 8M diamonds (Free Cut).<br />
11300.02 Dressing device, lower table mounted<br />
on the workhead side<br />
<br />
<br />
For dressing of external grinding wheels, consisting of:<br />
1 dressing arm,<br />
1 fi xed diamond holder for 8M multi-grain diamond (Free Cut),<br />
2 multi-grain 8M diamonds (Free Cut).<br />
11310.00 Dressing device on upper table<br />
<br />
For dressing of wheels for external and internal grinding,<br />
consisting of:<br />
1 clamping device to clamp the diamond holder,<br />
1 swivelling diamond holder for PKD diamond plate,<br />
1 PKD diamond plate.<br />
11330.00 CBN dressing roll with dia. 45mm x 1.5mm<br />
(without drive)<br />
<br />
For cylindrical dressing of CBN external grinding wheels. Service<br />
line for overpressure air.<br />
11350.02 Fixed diamond holder for single-pointe<br />
diamond 1 1/2 carat, diameter 16 mm<br />
<br />
With 1 location for<br />
1 x single-grain diamond 1 1/2 carat, dia. 16 mm.<br />
11350.04 Fixed diamond holder for single-pointe diamond<br />
1 1/2 carat, diameter 16 mm<br />
and for 8M multi-grain diamond (Free-Cut)<br />
<br />
With 3 locations for<br />
1 x single-pointe diamond 1 1/2 carat, dia. 16 mm<br />
2 x multi-grain 8M diamonds (Free-Cut)
KEL-VERA<br />
KEL-VARIA<br />
KEL-VIVA<br />
KEL-VISTA<br />
KEL-VITA<br />
11350.06 Swivelling diamond holder, Morse 0<br />
With 2 fi xing holes Morse 0.<br />
Swivelling range 96°, positions of dressing plates at 90°.<br />
Suitable for single-grain diamonds 3/4 and 1 1/2 carat and for<br />
diamond fl ieses.<br />
<br />
25<br />
11350.08 Swivelling holder for PCD dressing plates<br />
<br />
With 2 locations for PCD dressing plates.<br />
Swivelling range 170°, positions of dressing plates at 90°.<br />
Suitable for PCD dressing plates.<br />
11350.10 Swivelling diamond holder D 9.525 mm<br />
<br />
With 2 bores for profi ling diamonds.<br />
Swivelling range 100°, positions of dressing plates at 60°.<br />
Suitable for single-pointe diamonds and for MCD profi ling<br />
diamonds.<br />
11350.12 Swivelling diamond holder 10 mm,<br />
positions of dressing plates at 60°<br />
<br />
With 2 locations for screwed MCD dressing plates 10 mm.<br />
Swivelling range 66°, positions of dressing plates at 60°.<br />
Suitable for MCD dressing plates.<br />
Suitable for grinding wheels ø300 –400 mm.<br />
11350.14 Swivelling diamond holder 10 mm,<br />
positions of dressing plates at 90°<br />
<br />
With 2 locations for screwed MCD dressing plates 10 mm.<br />
Swivelling range 68°, positions of dressing plates 90°.<br />
Suitable for MCD dressing plates.<br />
Suitable for grinding wheels ø300 –400 mm.<br />
11350.20 Holder fixe for 8M multi-grain diamond (Free-Cut)<br />
<br />
With 3 locations for multi-grain diamond (Free-Cut).<br />
positions of diamonds at 90º.<br />
Suitable for multi-grain diamonds (Free-Cut).
Dressing devices, accessories and tools<br />
KEL-VERA<br />
KEL-VARIA<br />
KEL-VIVA<br />
KEL-VISTA<br />
KEL-VITA<br />
26<br />
11350.60 Spacer block 25 mm<br />
For optimal positioning of the dressing tools.<br />
<br />
11350.62 Spacer block 50 mm<br />
<br />
For optimal positioning of the dressing tools.<br />
11360.00 Single-point diamond 3/4 carat<br />
<br />
With shank Morse 0.<br />
Suitable for swivelling diamond holder Morse 0.<br />
11360.02 Single-point diamond 1 1/2 carat<br />
<br />
With shank Morse 0.<br />
Suitable for swivelling diamond holder Morse 0.<br />
11360.03 Single-point diamond 1 1/2 carat, dia. 16 mm<br />
<br />
With shank dia. 16 mm.<br />
Suitable for fi xed diamond holder for single-point diamond<br />
1 1/2 carat.<br />
11360.04 Diamond fliese, height 10 mm<br />
<br />
With shank Morse 0.<br />
Suitable for swivelling diamond holder Morse 0.
KEL-VERA<br />
KEL-VARIA<br />
KEL-VIVA<br />
KEL-VISTA<br />
KEL-VITA<br />
11360.06 PCD dressing plate<br />
Radii 0.125 mm, 60 degrees.<br />
Suitable for swivelling diamond holder PCD.<br />
<br />
27<br />
11360.08 Diamond fliese, height 10 mm, screwed<br />
<br />
Suitable for swivelling diamond holder 10 mm, 60º.<br />
11360.10 MCD dressing plate, 3 x 0.8 mm, screwed<br />
<br />
Suitable for swivelling diamond holder 10 mm, 90º.<br />
11360.12 Profiling diamond dia. 9.525 mm, standard<br />
<br />
Radii 0.25 mm, 60 degrees.<br />
Suitable for swivelling diamond holder dia. 9.525<br />
11360.14 Profiling diamond dia. 9.525 mm, short<br />
<br />
Radii 0.25 mm, 60 degrees.<br />
Suitable for swivelling diamond holder dia. 9.525<br />
11360.16 MCD profiling diamond dia. 9.525 mm, standard<br />
<br />
Radii 0.25 mm, 60 degrees.<br />
Suitable for swivelling diamond holder dia. 9.525
Dressing devices, accessories and tools<br />
KEL-VERA<br />
KEL-VARIA<br />
KEL-VIVA<br />
KEL-VISTA<br />
KEL-VITA<br />
28<br />
11360.18 8M multi-grain diamond (Free cut)<br />
Suitable for holder for multi-grain diamond (Free-Cut)
Measuring systems and Gap control units<br />
KEL-VERA<br />
KEL-VARIA<br />
KEL-VIVA<br />
KEL-VISTA<br />
KEL-VITA<br />
11430.02 Passive flagging device, Movomatic DP200<br />
Used for reading the workpiece position in the Z-axis.<br />
DP200 fl agging head.<br />
Measuring range + / - 2 mm.<br />
Available only in combination with a measuring control unit from<br />
Movomatic.<br />
<br />
29<br />
11430.04 Diameter measuring head, Movomatic DM200<br />
<br />
For non-interrupted external diameters.<br />
DM200 diameter measuring head.<br />
Measuring range 3–60 mm.<br />
Available only in combination with a measuring control unit from<br />
Movomatic.<br />
11430.06 Diameter measuring head, Movomatic DM200+<br />
<br />
For non-interrupted external diameters.<br />
DM200 diameter measuring head.<br />
Measuring range 3–104 mm.<br />
Available only in combination with a measuring control unit from<br />
Movomatic.<br />
11430.08 Diameter measuring head, Movomatic DU200<br />
<br />
For non-interrupted and interrupted external diameters.<br />
DU200 diameter measuring head.<br />
Measuring range 4–80 mm.<br />
Quick adjustment.<br />
Available only in combination with a measuring control unit from<br />
Movomatic.<br />
11430.10 Diameter measuring head, Movomatic DU200+<br />
<br />
For non-interrupted and interrupted external diameters.<br />
DU200 diameter measuring head.<br />
Measuring range 4 –152 mm.<br />
Quick adjustment.<br />
Available only in combination with a measuring control unit from<br />
Movomatic.<br />
11430.42 Passive flagging device, Marposs UNIMAR P50<br />
<br />
Used for reading the workpiece position in the Z-axis.<br />
UNIMAR P50 fl agging head.<br />
Measuring range + / - 2 mm.<br />
Available only in combination with a measuring control unit from<br />
Marposs.
Measuring systems and Gap control units<br />
KEL-VERA<br />
KEL-VARIA<br />
KEL-VIVA<br />
KEL-VISTA<br />
KEL-VITA<br />
30<br />
11430.44 Diameter measuring head, Marposs UNIMAR S20<br />
For non-interrupted external diameters.<br />
UNIMAR S20 diameter measuring head.<br />
Measuring range 2–95 mm.<br />
Available only in combination with a measuring control unit from<br />
Marposs.<br />
<br />
11430.46 Diameter measuring head, Marposs UNIMAR S30<br />
<br />
For non-interrupted and interrupted external diameters.<br />
UNIMAR S30 diameter measuring head.<br />
Measuring range 2–95 mm.<br />
Available only in combination with a measuring control unit from<br />
Marposs.<br />
11430.48 Diameter measuring head, Marposs UNIMAR S31<br />
<br />
For interrupted external diameters.<br />
UNIMAR S31 diameter measuring head.<br />
Measuring range 5–148 mm.<br />
Quick adjustment.<br />
Available only in combination with a measuring control unit from<br />
Marposs.
Coolant fi lter units and accessories<br />
KEL-VERA<br />
KEL-VARIA<br />
KEL-VIVA<br />
KEL-VISTA<br />
KEL-VITA<br />
4070.02 Paperband-filtration unit, 240 litres / SPB3<br />
With automatic feed of paperband.<br />
Capacity of tank 240 litres.<br />
Filtration capacity 100 l/min.<br />
Pumping capacity 80 l/min at 0.8 bar.<br />
Paperband width 700 mm.<br />
<br />
31<br />
4070.01 Paperband-filter unit, 375 litres / SPB4<br />
<br />
With automatic feed of paperband.<br />
Capacity of tank 375 litres.<br />
Filtration capacity 100 l/min.<br />
Pumping capacity 80 l/min at 0.8 bar.<br />
Paperband width 1000 mm.<br />
4071.02 Magnetic swarf-/paperband filter unit, 240 litres<br />
SPB3-SAMG4<br />
<br />
With automatic feed of paperband and<br />
level-controlled magnetic separator.<br />
Capacity of tank 240 litres.<br />
Filtration capacity 100 l/min.<br />
Pumping capacity 80 l/min at 0.8 bar.<br />
Paperband width 700 mm.<br />
4071.01 Magnetic swarf-/paperband filter unit, 375 litres<br />
SPB4-SAMG5<br />
<br />
With automatic feed of paperband and<br />
level-controlled magnetic separator.<br />
Capacity of tank 375 litres.<br />
Filtration capacity 100 l/min.<br />
Pumping capacity 80 l/min at 0.8 bar.<br />
Paperband width 1000 mm.<br />
0072.02 Spare paperband roll, 700 mm width<br />
<br />
Suitable for paper band fi lters / magnetic/paper band fi lter.
Coolant fi lter units and accessories<br />
KEL-VERA<br />
KEL-VARIA<br />
KEL-VIVA<br />
KEL-VISTA<br />
KEL-VITA<br />
32<br />
11500.00 Paper band filter 375 litres / SPB 4<br />
With automatic feed of fi lter paper band.<br />
Capacity of tank 375 l.<br />
Filtration capacity 100 l/min.<br />
Pumping capacity 100 l/min at 2 bar.<br />
Paper roll width 1000 mm.<br />
<br />
11500.10 Paper band filter 480 litres / SPB 5<br />
<br />
With automatic feed of fi lter paper band.<br />
Capacity of tank 480 l.<br />
Filtration capacity 100 l/min.<br />
Pumping capacity 100 l/min at 2 bar.<br />
Paper roll width 1000 mm.<br />
11500.11 Paper band filter 480 litres / SPB 5<br />
<br />
With automatic feed of fi lter paper band.<br />
Capacity of tank 480 l.<br />
Filtration capacity 100 l/min.<br />
Pumping capacity 100 l/min at 2 bar.<br />
Paper roll width 1000 mm.<br />
11510.00 Magnetic and paper filter 375 litres / SPB 4-SAMG 5<br />
<br />
With automatic feed of fi lter paper band.<br />
Magnetic separator liquid level controlled.<br />
Capacity of tank 375 l.<br />
Filtration capacity 100 l/min.<br />
Pumping capacity 80 l/min at 0.8 bar.<br />
Paper roll width 1000 mm.<br />
11510.10 Magnetic and paper filter 480 litres / SPB 5-SAMG 5<br />
<br />
With automatic feed of fi lter paper band.<br />
Magnetic separator liquid level controlled.<br />
Capacity of tank 480 l.<br />
Filtration capacity 100 l/min.<br />
Pumping cpacity 100 l/min at 2 bar.<br />
Paper roll width 1000 mm.<br />
11510.11 Magnetic and paper filter 480 litres / SPB 5-SAMG 5<br />
<br />
With automatic feed of fi lter paper band.<br />
Magnetic separator liquid level controlled.<br />
Capacity of tank 480 l.<br />
Filtration capacity 100 l/min.<br />
Pumping cpacity 100 l/min at 2 bar.<br />
Paper roll width 1000 mm.
KEL-VERA<br />
KEL-VARIA<br />
KEL-VIVA<br />
KEL-VISTA<br />
KEL-VITA<br />
11520.00 Endless band filter unit STE-10<br />
Filter unit with a grinding sludge tank and a lifting station.<br />
Capacity of tank 600 l.<br />
Filtration capacity 100 l/min.<br />
Pumping capacity 80 l/min at 0.8 bar.<br />
Paper roll width 500 mm.<br />
<br />
33<br />
11520.01 Endless band filter unit STE-10<br />
<br />
Filter unit with a grinding sludge tank and a lifting station.<br />
Capacity of tank 600 l.<br />
Filtration capacity 100 l/min.<br />
Pumping capacity 80 l/min at 0.8 bar.<br />
Paper roll width 500 mm.<br />
11530.00 Spare paper roll, width 1000 mm<br />
<br />
Suitable for paper band fi lters / magnetic/paper band fi lter.<br />
11560.00 Coolant shutoff valve for table equipment<br />
<br />
On-off valve for coolant to the table equipment mounted in the<br />
coolant supply.<br />
The following equipment may be connected:<br />
measuring devices<br />
coolant supply through workhead<br />
dressing device on upper table.
Miscellaneous assessories<br />
KEL-VERA<br />
KEL-VARIA<br />
KEL-VIVA<br />
KEL-VISTA<br />
KEL-VITA<br />
34<br />
11700.02 Lubricants for first filling<br />
<br />
11700.08 Lubricants for first filling<br />
<br />
4080.02 Lubricant for first filling<br />
<br />
4080.03 Spare belts
Documentation<br />
KEL-VERA<br />
KEL-VARIA<br />
KEL-VIVA<br />
KEL-VISTA<br />
KEL-VITA<br />
4084.01 Technical documentation in a EU-languages<br />
Valid for operating instructions and dialogue terminology.<br />
(German, English and French provided at no extra charge).<br />
Operating instructions of third-party delivered with our<br />
machines as well as wiring diagrams and lists of<br />
material available in German, English or French, only.<br />
<br />
35<br />
4084.02 Technical documentation in a non EU- language<br />
<br />
On request only.<br />
Operating instructions of third-party delivered with our<br />
machines as well as wiring diagrams and lists of<br />
material available in German, English or French, only<br />
12000.00 Technical documentation in a EU language<br />
<br />
This applies to the operating instructions, service instructions and<br />
the control dialog (German, English and French without increase<br />
of cost).<br />
Subsuppliers’ manuals, wiring diagrams and list of equipment solely<br />
in German, English and French.<br />
12000.02 Technical documentation in a EU language<br />
<br />
This applies to the operating instructions, service instructions and<br />
the control dialog (German, English and French without increase<br />
of cost).<br />
Subsuppliers’ manuals, wiring diagrams and list of equipment solely<br />
in German, English and French.<br />
12010.00 Technical documentation in non-EU language<br />
<br />
Consult manufacturer.<br />
Subsuppliers’ manuals, wiring diagrams and list of equipment solely<br />
in German, English and French.<br />
12010.02 Technical documentation in non-EU language<br />
<br />
Consult manufacturer.<br />
Subsuppliers’ manuals, wiring diagrams and list of equipment solely<br />
in German, English and French.
Services and Courses<br />
KEL-VERA<br />
KEL-VARIA<br />
KEL-VIVA<br />
KEL-VISTA<br />
KEL-VITA<br />
36<br />
19000.08 Preparation of grinding technology for the<br />
customer’s test pieces for the purpose of tests and<br />
machine acceptance.<br />
Operations included:<br />
Preparing the most suitable grinding procedure possible for the<br />
test piece specifi ed by customer.<br />
<br />
19000.18 Extension of warranty period to 4000 service<br />
hours Switzerland<br />
<br />
Extension of warranty period applies to faulty materials and time<br />
required to replace or repair it, including travel costs. This<br />
extension holds for the 2nd year of operation / max. 8000 hours.<br />
(Whatever may occur earlier.)<br />
19000.20 Extension of warranty period to 4000 service<br />
hours Switzerland<br />
<br />
<br />
Extension of warranty period applies to faulty materials and time<br />
required to replace or repair it, including travel costs. This<br />
extension holds for the 2nd year of operation / max. 8000 hours.<br />
(Whatever may occur earlier.)<br />
19000.22 Extension of warranty period to 4000 service<br />
hours Europe<br />
<br />
Extension of warranty period applies to faulty materials and time<br />
required to replace or repair it, including travel costs. This<br />
extension holds for the 2nd year of operation / upto max. 8000<br />
hours. (Whatever may occur earlier.)<br />
19000.24 Extension of warranty period to 4000 service<br />
hours Europe<br />
<br />
<br />
Extension of warranty period applies to faulty materials and time<br />
required to replace or repair it, including travel costs. This<br />
extension holds for the 2nd year of operation / upto max. 8000<br />
hours. (Whatever may occur earlier.)<br />
19000.26 Extension of warranty period to 4000 service<br />
hours non-European countries<br />
<br />
Extension of warranty period applies to faulty materials and time<br />
required to replace or repair it, including travel costs. Valide for the<br />
2nd year of operation / upto max. 8000 hours from the date of<br />
installation. (Whatever may occur earlier.)
KEL-VERA<br />
KEL-VARIA<br />
KEL-VIVA<br />
KEL-VISTA<br />
KEL-VITA<br />
19000.28 Extension of warranty period to 4000 service<br />
hours non-European countries<br />
<br />
<br />
37<br />
Extension of warranty period applies to faulty materials and time<br />
required to replace or repair it, including travel costs. Valide for the<br />
2nd year of operation / upto max. 8000 hours from the date of<br />
installation. (Whatever may occur earlier.)<br />
19000.30 Basic course: Cylindrical grinding<br />
<br />
Participants: users of cylindrical grinding machines and universal<br />
grinding machines.<br />
19100.00 Programming course: GRINDplusIT control system<br />
<br />
Participants: operating staff, programmers, and foremen.<br />
Subject of the course: machine operation in various modes<br />
(manual, ISO, graphic, MDI). Generation of programs for<br />
workpieces, profi le dressing and contour grinding.<br />
19100.01 Programming course: GE FANUC control system<br />
<br />
Participants: operating staff, programmers, and foremen.<br />
Subject of the course: machine operation in various modes<br />
(manual, ISO, graphic, MDI). Generation of programs for<br />
workpieces, profi le dressing and contour grinding.<br />
19100.02 Programming course: KEL-ASSIST 100<br />
<br />
Participants: operating staff, programmers, foremen.<br />
19100.04 Programming course: thread module of<br />
KEL-ASSIST 100<br />
<br />
Participants: operating staff, programmers, foremen.
Services and Courses<br />
KEL-VERA<br />
KEL-VARIA<br />
KEL-VIVA<br />
KEL-VISTA<br />
KEL-VITA<br />
38<br />
19100.06 Programming course: DXF import module of<br />
KEL-ASSIST 100<br />
Participants: operating staff, programmers, foremen.<br />
<br />
Subject of the course: DXF import module operation.<br />
19100.08 Programming course: KEL-THREAD<br />
<br />
Participants: operating staff, programmers, foremen.<br />
Subject of the course: Operation of the KEL-THREAD system.<br />
Generation of programs for thread grinding and dressing during<br />
thread grinding, dressing of thread grinding wheels, grinding of<br />
Kellenberger dummy workpieces.<br />
19100.10 Programming course: KEL-POLY / 2 days<br />
<br />
Participants: operating staff, programmers, foremen.<br />
Subject of the course: Operation of the KEL-POLY system.<br />
Generation of programs for non-cylindrical grinding, grinding of<br />
Kellenberger dummy workpieces.<br />
19100.11 Programming course: KEL-POLY / 3 days<br />
<br />
Participants: operating staff, programmers, foremen.<br />
Subject of the course: Operation of the KEL-POLY system and the<br />
Vector CAD program. Generation of programs for non-cylindrical<br />
grinding, grinding of Kellenberger dummy workpieces.<br />
19100.12 Course: Setting and operation of KEL-VARIA<br />
<br />
Participants: operating staff, programmers, foremen.<br />
Subject of the course: Operation and setting of the grinding<br />
machine, calibration, dressing, measuring devices, KEL-TOUCH,<br />
B-axis, generation of programs for workpieces and grinding<br />
wheel dressing.<br />
19100.13 Course: Setting and operation of KEL-VIVA<br />
<br />
Participants: operating staff, programmers, foremen.<br />
Subject of the course: Operation and setting of the grinding<br />
machine, calibration, dressing, measuring devices, KEL-TOUCH,<br />
B-axis, generation of programs for workpieces and grinding<br />
wheel dressing.
KEL-VERA<br />
KEL-VARIA<br />
KEL-VIVA<br />
KEL-VISTA<br />
KEL-VITA<br />
19100.14 Course: Maintenance and attendance of KEL-VARIA<br />
Participants: operating and maintenance staff.<br />
<br />
39<br />
Subject of the course: Mechanical structure of the machine,<br />
workhead, wheelhead, tailstock, movement axes, hydrostatic<br />
system, hydrolic, air system, electrical system, hardware, software,<br />
PLC (Programmable Logic Control), interfaces.<br />
19100.15 Course: Maintenance and attendance of KEL-VIVA<br />
<br />
Participants: operating and maintenance staff.<br />
Subject of the course: Mechanical structure of the machine,<br />
workhead, wheelhead, tailstock, movement axes, hydrostatic<br />
system, hydraulic, air system, electrical system, hardware, software,<br />
PLC (Programmable Logic Control), interfaces.<br />
19100.16 Customer specific course: KEL-VARIA<br />
<br />
Participants: operating staff, programmers, foremen.<br />
Subject of the course: As per agreement (for example, parameter<br />
programming or preparation of grinding technology procedure).<br />
19100.17 Customer specific course: KEL-VIVA<br />
<br />
Participants: operating staff, programmers, foremen.<br />
Subject of the course: As per agreement (for example, parameter<br />
programming or preparation of grinding technology procedure).<br />
19100.24 Course: Setting and operation of KEL-VISTA<br />
<br />
Participants: operating staff, programmers, foremen.<br />
Subject of the course: Operation and setting of the grinding<br />
machine, calibration, dressing, measuring devices, gap control<br />
sensor unit, generation of programs for workpieces and grinding<br />
wheel dressing.<br />
19100.25 Course: Maintenance and attendance of KEL-VISTA<br />
<br />
Participants: operating and maintenance staff.<br />
Subject of the course: Mechanical structure of the machine,<br />
workhead, wheelhead, tailstock, movement axes, hydraulic system,<br />
air system, electrical system, hardware, software, PLC<br />
(Programmable Logic Control), interfaces.
Services and Courses<br />
KEL-VERA<br />
KEL-VARIA<br />
KEL-VIVA<br />
KEL-VISTA<br />
KEL-VITA<br />
40<br />
19100.26 Customer specific course: KEL-VISTA<br />
Participants: operating staff, programmers, foremen.<br />
<br />
Subject of the course: As per agreement (for example, parameter<br />
programming or preparation of grinding technology procedure).<br />
19100.27 Course: Setting and operation of KEL-VERA<br />
<br />
Participants: operating staff, programmers, foremen.<br />
Subject of the course: Operation and setting of the grinding<br />
machine, calibration, dressing, measuring devices, KEL-TOUCH,<br />
B-axis, generation of programs for workpieces and grinding<br />
wheel dressing.<br />
19100.28 Course: Maintenance and attendance of KEL-VERA<br />
<br />
Participants: operating and maintenance staff.<br />
Subject of the course: Mechanical structure of the machine,<br />
workhead, wheelhead, tailstock, movement axes, hydrostatic<br />
system, air system, electrical system, hardware, software, PLC<br />
(Programmable Logic Control), interfaces.<br />
19100.29 Customer specific course: KEL-VERA<br />
<br />
Participants: operating staff, programmers, foremen.<br />
Subject of the course: As per agreement (for example, parameter<br />
programming or preparation of grinding technology procedure).<br />
19100.30 Course: setting and operation of KEL-VITA<br />
<br />
Participants: operating staff, programmers, foremen.<br />
Subject of the course: Operation and setting of the grinding<br />
machine, calibration, dressing, measuring devices, KEL-TOUCH,<br />
B-axis, generation of programs for workpieces and grinding<br />
wheel dressing.<br />
19100.31 Course: Maintenance and attendance of KEL-VITA<br />
<br />
Participants: operating and maintenance staff.<br />
Subject of the course: Mechanical structure of the machine,<br />
workhead, wheelhead, tailstock, movement axes, hydraulic, air<br />
system, electrical system, hardware, software, PLC (Programmable<br />
Logic Control), interfaces.
KEL-VERA<br />
KEL-VARIA<br />
KEL-VIVA<br />
KEL-VISTA<br />
KEL-VITA<br />
19100.32 Customer course: KEL-VITA<br />
Participants: operating staff, programmers, foremen.<br />
<br />
41<br />
Subject of the course: As per agreement (for example, parameter<br />
programming or preparation of grinding technology procedure).
42<br />
Notice
Notice<br />
43
Competence and a world-wide partnership<br />
44<br />
First-class sales and service organization<br />
for all the major international<br />
markets with local well-trained staff.<br />
KELLENBERGER guarantees expert advice<br />
and support for evaluation, purchase,<br />
installation and services of our<br />
high-quality grinding systems.<br />
L. Kellenberger & Co. AG<br />
Heiligkreuzstrasse 28<br />
9009 St.Gallen / Switzerland<br />
Phone +41 (0) 71 242 91 11<br />
Fax +41 (0) 71 242 92 22<br />
www.kellenberger.net<br />
info@kellenberger.net<br />
Sales and service in USA<br />
and Canada:<br />
Hardinge Inc.<br />
One Hardinge Drive<br />
P.O. Box 1507<br />
Elmira, New York 14902-1507 USA<br />
Phone +1 (607) 734 2281<br />
Fax +1 (607) 735 0570<br />
www.hardinge.com<br />
www.kellenberger.com<br />
info@kellenberger.com<br />
Sales and service in Great Britain<br />
and The Republic of Ireland:<br />
Your local KELLENBERGER Partner:<br />
HARDINGE GRINDING GROUP<br />
KELLENBERGER • HAUSER • TRIPET • TSCHUDIN<br />
Hardinge Machine Tools Ltd<br />
Whiteacres<br />
Cambridge Road<br />
Whetstone<br />
Leicester LE8 6BD<br />
United Kingdom<br />
Phone +44 (0) 11 62 869 900<br />
Fax +44 (0) 11 62 869 901<br />
www.hardinge.co.uk<br />
info@hardinge.co.uk<br />
Certified Management System<br />
ISO 9001: 2000