Easy-e-BeamTM - IBA Industrial

Easy-e-Beam TM integrated system is based on the proven industrial reliability of the Dynamitron ® accelerator.
Crosslinked wire insulation and cable jacketing provide higher quality products that meet today’s highest
performance demands.
Six Reasons to choose Easy-e-Beam TM :
1 ALL-IN-ONE
2
Easy-e-Beam TM is a unique
ALL-IN-ONE wire and cable
processing system. Its electron
beam accelerator, underbeam
wire handling system and
auxiliary systems are fully
integrated by a programmable
PLC based control system.
An advanced control system
means that Easy-e-Beam TM
can be easily operated by
one person.
SELF-SHIELDED
Easy-e-Beam TM is self-contained
and can be quickly and easily
installed and put into use in
most existing wire and cable
facilities. Wires and cables can
be easily fed into and taken from
the Easy-e-Beam TM system.
3 COST EFFECTIVE
The high electrical efficiency
and low maintenance costs of
Easy-e-Beam TM are significant.
These factors combined with
the high production throughput
of Easy-e-Beam TM mean that
savings of at least 20% can
be achieved compared to traditional
crosslinking methods.
4 CROSSLINKING
HOMOGENEITY
Compared with other chemical
alternatives, Easy-e-Beam TM
provides much better
crosslinking homogeneity thus
avoiding weak crosslinking spots
in the insulation .
5 HIGH VOLUME
THROUGHPUT
The Easy-e-Beam TM crosslinking
of wire insulation and cable
jacketing can be achieved at 1000
meters per minute. Wires from 0.22
mm² up to 30 mm² (0.4 kcmil up to
60 kcmil) can be crosslinked using
Easy-E-Beam TM .
6 SAFE AND RELIABLE
The IBA crosslinking technology of
Easy-e-Beam TM has been
successfully used for over 50 years
in numerous industrial
applications. Dealing with IBA, you
are sure to receive the
safest, most reliable equipment and
a continuous service from a well
established market player.
IBA has helped us maintain unanticipated downtime
well below 2%, in many years it has approached 0%.
Ken Koziol, General Manager
Sterigenics - Gaithersburg
02 EASY-E-BEAM