Siemens Speedstream 4100 Ethernet ADSL Modem
Siemens Speedstream 4100 Ethernet ADSL Modem
Siemens Speedstream 4100 Ethernet ADSL Modem
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Business IP DSL Self Installation Instructions for<br />
the <strong>Siemens</strong> SpeedStream <strong>4100</strong> <strong>Ethernet</strong> <strong>ADSL</strong><br />
<strong>Modem</strong><br />
Before You Start<br />
These instructions assume a NIC (Network Interface Card) <strong>Ethernet</strong> Adapter is<br />
already installed on the workstation to be used to access the Internet via DSL.<br />
Please refer to your equipment vendor on how to properly install and configure<br />
the NIC.<br />
What comes out of the box<br />
The CPE (Customer Premise Equipment) box delivered to you will contain the<br />
following:<br />
� A quick start guide containing a self installation CD<br />
� The SpeedStream <strong>4100</strong> modem<br />
� The Power Supply/Adapter<br />
� The <strong>Ethernet</strong> cable (Yellow)<br />
� The Data cable (Gray)<br />
� One line splitter<br />
� Three line filters<br />
� One wall mount DSL filter<br />
If additional filters are necessary, they can be purchased from any local<br />
electronic supplies store.<br />
CPE Configuration and User Registration Process<br />
These instruction will take you through the inside wiring setup, the CPE<br />
configuration, and the User registration process. You should have already<br />
received an email with your User Name and Password. If you didn’t, or if you<br />
misplaced it, call your support center at 1-866-920-5228, option 1 for assistance.<br />
1. Place the CD in the drive<br />
2. The setup program should start automatically. If it doesn’t, click on “Start”,<br />
then “Run” and type in x:\Installs\setup.exe (where x is the drive letter of<br />
you CD-Rom drive)
Business IP DSL Self Installation Instructions for<br />
the <strong>Siemens</strong> SpeedStream <strong>4100</strong> <strong>Ethernet</strong> <strong>ADSL</strong><br />
<strong>Modem</strong><br />
3. Welcome Screen<br />
4. Click on “Next”
Business IP DSL Self Installation Instructions for<br />
the <strong>Siemens</strong> SpeedStream <strong>4100</strong> <strong>Ethernet</strong> <strong>ADSL</strong><br />
<strong>Modem</strong><br />
5. Software License Agreement<br />
6. Read the Software License Agreement and click on “I Accept”
Business IP DSL Self Installation Instructions for<br />
the <strong>Siemens</strong> SpeedStream <strong>4100</strong> <strong>Ethernet</strong> <strong>ADSL</strong><br />
<strong>Modem</strong><br />
7. Subscription Information<br />
8. AT&T emailed the Username and Password to you separately. If you<br />
misplaced the information, please call your support center at<br />
1-866-920-5228, option 1 for assistance. Make sure you have your order<br />
number, telephone number where the DSL is being installed, or the tracking<br />
number for this order to be properly identified<br />
9. Once you have this information, click on “Yes”<br />
10.
Business IP DSL Self Installation Instructions for<br />
the <strong>Siemens</strong> SpeedStream <strong>4100</strong> <strong>Ethernet</strong> <strong>ADSL</strong><br />
<strong>Modem</strong><br />
Login Screen<br />
11.Type the Username and Password in the appropriate field<br />
12.Click on “Next”<br />
13.
Business IP DSL Self Installation Instructions for<br />
the <strong>Siemens</strong> SpeedStream <strong>4100</strong> <strong>Ethernet</strong> <strong>ADSL</strong><br />
<strong>Modem</strong><br />
Filters Installations<br />
14.Click on “Next”
Business IP DSL Self Installation Instructions for<br />
the <strong>Siemens</strong> SpeedStream <strong>4100</strong> <strong>Ethernet</strong> <strong>ADSL</strong><br />
<strong>Modem</strong><br />
15.There are two types of filters in the box:<br />
16.Click on “Next”
Business IP DSL Self Installation Instructions for<br />
the <strong>Siemens</strong> SpeedStream <strong>4100</strong> <strong>Ethernet</strong> <strong>ADSL</strong><br />
<strong>Modem</strong><br />
17.Locate the phone jack where you wand to install DSL<br />
18.Click on “Next”
Business IP DSL Self Installation Instructions for<br />
the <strong>Siemens</strong> SpeedStream <strong>4100</strong> <strong>Ethernet</strong> <strong>ADSL</strong><br />
<strong>Modem</strong><br />
19.Plugging the filter into the jack<br />
20.Click on “Next”
Business IP DSL Self Installation Instructions for<br />
the <strong>Siemens</strong> SpeedStream <strong>4100</strong> <strong>Ethernet</strong> <strong>ADSL</strong><br />
<strong>Modem</strong><br />
Plug any devices listed below into the side of the filter labeled as “Phone”<br />
21.Click on “Next”
Business IP DSL Self Installation Instructions for<br />
the <strong>Siemens</strong> SpeedStream <strong>4100</strong> <strong>Ethernet</strong> <strong>ADSL</strong><br />
<strong>Modem</strong><br />
22.Connecting the data cable<br />
23.Click on “Next”<br />
24.
Business IP DSL Self Installation Instructions for<br />
the <strong>Siemens</strong> SpeedStream <strong>4100</strong> <strong>Ethernet</strong> <strong>ADSL</strong><br />
<strong>Modem</strong><br />
Installing filters on all other phones in the home<br />
25.Click on “Next”
Business IP DSL Self Installation Instructions for<br />
the <strong>Siemens</strong> SpeedStream <strong>4100</strong> <strong>Ethernet</strong> <strong>ADSL</strong><br />
<strong>Modem</strong><br />
26.Installing filters on all other phone devices in the home<br />
27.Click on “Next”
Business IP DSL Self Installation Instructions for<br />
the <strong>Siemens</strong> SpeedStream <strong>4100</strong> <strong>Ethernet</strong> <strong>ADSL</strong><br />
<strong>Modem</strong><br />
28.Connecting the DSL <strong>Modem</strong><br />
29.Click on “Next”<br />
A. To Bridge the <strong>Modem</strong>:<br />
1. Access the PPP location screen by accessing the GUI.<br />
• Click the Advanced Button<br />
• Select the PPP Location button<br />
2. Select one of the following options.<br />
• PPPoE is on the <strong>Modem</strong><br />
• PPP is on the computer<br />
• Bridged Mode (PPPoE is not used).<br />
NOTE: When the PPPoE on the modem or Bridge mode is<br />
selected a warning screen displays.
Business IP DSL Self Installation Instructions for<br />
the <strong>Siemens</strong> SpeedStream <strong>4100</strong> <strong>Ethernet</strong> <strong>ADSL</strong><br />
<strong>Modem</strong><br />
3. Select the option based on the following information:<br />
• Bridged Mode<br />
• PPPoE on the <strong>Modem</strong><br />
4. <strong>Modem</strong> restarts to save the settings.<br />
5. Check if you can connect and browse.<br />
6. If you are unable connect, refer to <strong>Siemens</strong> S100/<strong>4100</strong> HSI <strong>Modem</strong><br />
– Cannot Access the GUI.<br />
B. To Reset the <strong>Modem</strong> (to be executed as a last resort):<br />
1. Press the Reset button on the bottom of the 5100B and on the<br />
back of the <strong>4100</strong>.<br />
LEDs should return to a Green state in about 60 seconds.<br />
• Power LED<br />
• <strong>Ethernet</strong> LED<br />
• DSL LED<br />
2. Open a browser and access the 5100B/<strong>4100</strong> modem GUI using the<br />
URL http://192.168.0.1.<br />
***Warning:<br />
� Do NOT unplug the power cord and turn off the power.<br />
� Do NOT turn off the modem using the power button during<br />
a Reset back to factory default.<br />
30.The software will configure and train the DSL <strong>Modem</strong><br />
31. Close the installation program<br />
32.Remove the CD from the disk drive and store in a safe location<br />
33.Upon completion of this step, you will be able to access the internet by<br />
opening a browser and specifying a valid address (i.e. http://www.att.com)<br />
34.If the process fails to install the modem correctly, or if you can’t access the<br />
internet, call your support center at 1-866-920-5228, option 1 for assistance<br />
35.Thank you for choosing AT&T as your broadband access provider<br />
36.Happy surfing!