i-MOTION 3 Ins.indb - Sram
i-MOTION 3 Ins.indb - Sram i-MOTION 3 Ins.indb - Sram
TECHNICAL DATA GEAR HUB i-MOTION 3 with back pedal brake Speeds 3 Brake With back pedal brake Over Locknut Dim., OLD 130 mm Length, L 168 and 178 mm Ends Diameter M 10x1 Dropout Width Dim., A min. 4 mm / max. 8 mm Holes 28 / 32 / 36 Axle Spoke Hole Diameter Hole Ref. ø, HR Flange Dist. to 1 / 2 OLD Chain Compatibility 3.0 mm Total Ratio 186 % Gear jump 1 to 3 36% / 36% Chainline, CL Dimension Sprocket 70 mm F 1 = 27.3 mm / F 2 = 27.6 mm 44.0 mm (straight spr.) / 40.5 mm (off-set spr.) 1 / 2 " x 1 / 8 " and 1 / 2 " x 3 / 32 " 16 / 17 / 18 T. (straight) / 19 / 20 / 21 T. (off-set) Shifter SRAM i-MOTION 3 Tandem not suitable for tandems and transport bicycles SHIFTER Shifter type Assembly location Gear indication Barrel adjuster Clamp diameter Straight handlebar ends Cable laying 18 i-MOTION 3 shifter Twist shifter Right side of handlebar Window Indexed 22.3 mm Length = min. 150 mm Continuous cable housing (pre-assembled) i-MOTION 3 · June 2006
TECHNICAL DATA E HR 78 100 124.5 Ø 7.3 Ø 3.0 Version with back pedal brake CL straight 1 /2 OLD CL off-set A M 10x1 2.8 2.8 A 3 3 F 1 F 2 OLD 19 L M 10x1 i-MOTION 3 · June 2006 19
- Page 1 and 2: E user manual D betriebsanleitung F
- Page 3 and 4: TABLE OF CONTENTS E THE SRAM i-MOTI
- Page 5 and 6: OPERATION SHIFTING Shift gears by t
- Page 7 and 8: MAINTENANCE AND CARE REMOVE AND FIT
- Page 9 and 10: MAINTENANCE AND CARE REMOVE AND FIT
- Page 11 and 12: MAINTENANCE AND CARE REPAIR WORK /
- Page 13 and 14: ASSEMBLY OF COMPONENTS 20 Slide one
- Page 15 and 16: ASSEMBLY OF COMPONENTS ASSEMBLY SHI
- Page 17: ASSEMBLY OF COMPONENTS E i-MOTION 3
TECHNICAL DATA<br />
GEAR HUB<br />
i-<strong>MOTION</strong> 3 with back pedal brake<br />
Speeds 3<br />
Brake With back pedal brake<br />
Over Locknut Dim., OLD 130 mm<br />
Length, L 168 and 178 mm<br />
Ends Diameter M 10x1<br />
Dropout Width Dim., A min. 4 mm / max. 8 mm<br />
Holes 28 / 32 / 36<br />
Axle<br />
Spoke<br />
Hole Diameter<br />
Hole Ref. ø, HR<br />
Flange Dist. to 1 / 2 OLD<br />
Chain<br />
Compatibility<br />
3.0 mm<br />
Total Ratio 186 %<br />
Gear jump 1 to 3 36% / 36%<br />
Chainline, CL<br />
Dimension<br />
Sprocket<br />
70 mm<br />
F 1 = 27.3 mm / F 2 = 27.6 mm<br />
44.0 mm (straight spr.) / 40.5 mm (off-set spr.)<br />
1 / 2 " x 1 / 8 " and 1 / 2 " x 3 / 32 "<br />
16 / 17 / 18 T. (straight) / 19 / 20 / 21 T. (off-set)<br />
Shifter SRAM i-<strong>MOTION</strong> 3<br />
Tandem<br />
not suitable for tandems and transport bicycles<br />
SHIFTER<br />
Shifter type<br />
Assembly location<br />
Gear indication<br />
Barrel adjuster<br />
Clamp diameter<br />
Straight handlebar ends<br />
Cable laying<br />
18<br />
i-<strong>MOTION</strong> 3 shifter<br />
Twist shifter<br />
Right side of handlebar<br />
Window<br />
Indexed<br />
22.3 mm<br />
Length = min. 150 mm<br />
Continuous cable housing (pre-assembled)<br />
i-<strong>MOTION</strong> 3 · June 2006