1 - Seiko I Infotech Inc.
1 - Seiko I Infotech Inc. 1 - Seiko I Infotech Inc.
HP RTL Plotting Command List Symbols in the following table denote as follows: : Denotes the command supported by this plotter. : Denotes that only part of the command function is supported by this plotter. × : Denotes the command not supported by this plotter. If a command not supported by this plotter is received, that command is ignored. If a command not listed in the following table is received, the command error occurs. (1/2) Name Enter HP-GL/2 Mode Enter PCL Mode Reset Universal Exit Language/Start of PJL Command Code Function E SC % # B Activates HP-GL/2 mode. E SC % # A Activates PCL mode. E SC E Performs resetting. Support E SC % # X S tarts PJL. × A pple Talk Configuration E SC & b # W [bin data] C ommunicates with Apple Talk Driver. × Configure Image Data Set Red Parameter Set Green Parameter Set Blue Parameter Assign Color Index Push/Pup palette Source Raster Width Source Raster Height Move CAP Horizontal (Decipoints) Move CAP Horizontal Move CAP Vertical Y Offset Destination Raster Width Destination Raster Height Raster Line Path Negative Motion Set Graphics Resolution Start Raster Graphics End Raster Graphics Transfer Raster Data by Plane Transfer Raster Row/Block Data by Set Compression Method ESC ✽ v # W [data] Configures image data. ESC ✽ v # a | A Sets red parameter. ESC ✽ v # b | B Sets green parameter. ESC ✽ v # c | C Sets blue parameter. ESC ✽ v # i | I Assigns color index number. ESC ✽ p # P Pushes or pops up the palette. ESC ✽ r # s | S Sets source raster width. ESC ✽ r # t | T Sets source raster height. E SC & a # h | H Moves CAP horizontally (decipoints). ESC ✽ p # x | X Moves CAP horizontally. ESC ✽ p # y | Y Moves CAP vertically. ESC ✽ b # y | Y Sets Y-direction offset. ESC ✽ t # h | H Sets destination raster width. ESC ✽ t # v | V Sets destination raster height. ESC ✽ b # l | L Sets raster line path. E SC & a # n | N Specifies a negative motion. ESC ✽ t # r | R Sets graphics resolution. ESC ✽ r # a | A Shows the start of raster graphics. ESC ✽ r C Shows the end of raster graphics. ESC ✽ b # V [data] Transfers raster data every plane. ESC ✽ b # W [data] Transfers raster data every row/block. ESC ✽ b # m | M Sets a compression method. Appendix-26
▼ Command list Foreground Render Simple Current Name Color Algorithm Color Pattern Download Pattern Pattern Pattern Pattern Logical Pattern Mode Source Mode Control ID Reference Operation Transparency Transparency Command Code ESC ✽ v # s | S ESC ✽ t # j | J Function Sets the RGB value of the specified index number to the lower limit value of raster printing. Specifies algorithm to express halftone data. ESC ✽ r # u | U Sets color mode. Support ESC ✽ v # t | T S ets pattern type to the raster. × ESC ✽ c # W [pattern data] ESC ✽ c # q | Q × L oads user defined pattern. × Specifies pattern. deletion of user defined ESC ✽ c # g | G S ets ID of user defined pattern. × ESC ✽ p # r | R D efines pattern paste position. × ESC ✽ l # o | O ESC ✽ v # o | O ESC ✽ v # n | N Specifies logical operation mode to the raster data. Turns on/off transparency mode to the pattern. Turns on/off transparency mode to the source raster. ( 1 ) Parameter value “-1” is treated as “0”. Parameter values “-1 to 3” do not affect the palette information. ( 2 ) Parameter values “0 to 3” do not affect the palette information. ( 3 ) Partial page, even if present in received data, is not printed. ( 4 ) Parameter “4” in the Set Pixel Encoding Mode is not supported. Range assignable with the Set Number of Bit per Index is 1 to 8. Range assignable with the Set Number of Bit per Primary is 0 to 8. ( 5 ) Range of assignable parameter values is 0 to 31 (2**5-1). ( 6 ) Pen width is not pushed/popped up. ( 7 ) Effective parameter value of ESC*t#J is “0” only. ( 8 ) ESC*I#O is effective only for part of logical operation to the monochrome binary raster. × × × (2/2) Commands not listed in the table are treated as a command error or thrown away. Appendix-27
- Page 249 and 250: ▼When an error message appears (4
- Page 251 and 252: ▼When an error message appears (5
- Page 253 and 254: ▼When an error message appears (1
- Page 255 and 256: ▼When an error message appears (2
- Page 257 and 258: ▼When an error message appears
- Page 259 and 260: ▼When an error message appears
- Page 261 and 262: ▼When an error message appears (6
- Page 263 and 264: ▼When an error message appears (1
- Page 265 and 266: Error log ▼When an error message
- Page 267 and 268: ▼Error log Type of Error Log The
- Page 269 and 270: ▼Error log Error Log Classificati
- Page 271 and 272: ▼Troubleshooting for ethernet Cau
- Page 273 and 274: When a print error occurs This sect
- Page 275 and 276: ▼ Basic Specifications Appendix A
- Page 277 and 278: ▼ Basic specifications (2/2) Item
- Page 279 and 280: ▼ Menu structure A Note ( 5 ) TIF
- Page 281 and 282: ▼ Menu structure C C' Note ( 7 )
- Page 283 and 284: ▼ Menu structure E E' #PEN PARAME
- Page 285 and 286: ▼ Menu structure [PAPER] MENU MEN
- Page 287 and 288: ○ ○ ○ ○ ▼ Menu structure
- Page 289 and 290: ▼ Menu structure [SYSTEM] MENU ME
- Page 291 and 292: ▼ Menu structure H SYSTEM #APPLY
- Page 293 and 294: ▼ Menu structure J #SCAN START >O
- Page 295 and 296: ▼ Menu structure L #CONNECTION TY
- Page 297 and 298: ▼ Command list HP-GL,HP-GL/2 Devi
- Page 299: ▼ Command list Advanced instructi
- Page 303 and 304: ▼ Command list (2/6) Classificati
- Page 305 and 306: ▼ Command list (4/6) Classificati
- Page 307 and 308: ▼ Command list (6/6) Classificati
- Page 309 and 310: ▼ Command list CALS Format Record
- Page 311: ▼ Command list lpd Support Comman
▼ Command list<br />
Foreground<br />
Render<br />
Simple<br />
Current<br />
Name<br />
Color<br />
Algorithm<br />
Color<br />
Pattern<br />
Download Pattern<br />
Pattern<br />
Pattern<br />
Pattern<br />
Logical<br />
Pattern<br />
Mode<br />
Source<br />
Mode<br />
Control<br />
ID<br />
Reference<br />
Operation<br />
Transparency<br />
Transparency<br />
Command<br />
Code<br />
ESC<br />
✽ v # s | S<br />
ESC<br />
✽ t # j | J<br />
Function<br />
Sets the RGB value of the specified<br />
index number to the lower limit<br />
value of raster printing.<br />
Specifies algorithm to express<br />
halftone data.<br />
ESC<br />
✽ r # u | U Sets<br />
color mode.<br />
Support<br />
ESC<br />
✽ v # t | T S ets pattern type to the raster.<br />
×<br />
ESC<br />
✽ c # W [pattern<br />
data]<br />
ESC<br />
✽ c # q | Q<br />
×<br />
<br />
L oads user defined pattern.<br />
×<br />
Specifies<br />
pattern.<br />
deletion of user defined<br />
ESC<br />
✽ c # g | G S ets ID of user defined pattern.<br />
×<br />
ESC<br />
✽ p # r | R D efines pattern paste position.<br />
×<br />
ESC<br />
✽ l # o | O<br />
ESC<br />
✽ v # o | O<br />
ESC<br />
✽ v # n | N<br />
Specifies logical operation mode to<br />
the raster data.<br />
Turns on/off transparency mode to<br />
the pattern.<br />
Turns on/off transparency mode to<br />
the source raster.<br />
( 1 ) Parameter value “-1” is treated as “0”.<br />
Parameter values “-1 to 3” do not affect the palette information.<br />
( 2 ) Parameter values “0 to 3” do not affect the palette information.<br />
( 3 ) Partial page, even if present in received data, is not printed.<br />
( 4 ) Parameter “4” in the Set Pixel Encoding Mode is not supported.<br />
Range assignable with the Set Number of Bit per Index is 1 to 8.<br />
Range assignable with the Set Number of Bit per Primary is 0 to 8.<br />
( 5 ) Range of assignable parameter values is 0 to 31 (2**5-1).<br />
( 6 ) Pen width is not pushed/popped up.<br />
( 7 ) Effective parameter value of ESC*t#J is “0” only.<br />
( 8 ) ESC*I#O is effective only for part of logical operation to the monochrome binary raster.<br />
<br />
×<br />
<br />
×<br />
×<br />
(2/2)<br />
Commands not listed in the table are treated as a command error or thrown away.<br />
<br />
Appendix-27