1 - Seiko I Infotech Inc.

Basic specifications
Plotter Specification
Items
Recording method
Developing method
Type of photosensitive
element
Fusing system
Resolution
Continuous print speed
Paper feed configuration/
Delivery direction
Type of paper
■ Basic Specifications of Plotter (1/2)
Specifications/Functions
LP-1010-MF
LP-1010L-MF
Electrophotographic method (LED exposure)
Dry development (one component)
OPC
Heat roller
600 dpi
A0 (ortrait) : 3.4 sheets/min
A1 (portrait) : 4.6 sheets/min
A2 (portrait) : 6.2 sheets/min
A3 (portrait) : 8.0 sheets/min
A3 (landscape) : 8.8 sheets/min
A4 (landscape) : 10.6 sheets/min
Max. triple rolls, manual feeding/Front delivery
Plain paper
Recycled paper
Tracing paper
Mat film
Rolled paper (width) A0/A1/A2/A3, 36”/24”/18”/12”
Paper size
Cut paper: A0/A1/A2/A3
Max. output length 2.5 m (98.4 inches) 10 m (393.7 inches)
Warming up time 4 minutes or less 8 minutes or less
First prin
Plotting guarantee area
(Rolled paper only)
Data format
Within 28 seconds/A0 drawing
All areas except margin 5 mm (0.2 inches) at top/margin 12 mm
(0.47 inches) at bottom/margin 3 mm (0.12 inches) on each side
D-SCAN, HP-GL, HP-GL/2, HP RTL, TIFF, CALS
HDD 20 GB (optional) 20 GB
Interface
Network protocol
Standard:
Ethernet (10/100BASE)
Optional:
USB2.0, Centronics
TCP/IP (ftp, lpr, xpt)
Standard:
Ethernet (10/100BASE)
USB2.0, Centronics
Appendix-2