1 - Seiko I Infotech Inc.

When a print error occurs
This section explains how to solve print quality problems. Take
appropriate measures according to the symptoms.
■Measures to solve print quality problems
Symptom Cause Corrective measure
Plotting is
light/dark
---------- Adjust the density. ⇒ Page 6-5
Plotting is locally
deleted
Plotting is locally
streaked
The type of loaded paper does
not match the type of paper
specified on the panel.
Paper contains moisture.
The recommended paper is not
used.
Process cartridge reached its
life.
◆
Replace the paper, or change the
setting. ⇒ Page 2-16 or 7-2
Cut the end of the rolled paper and
retry plotting. ⇒ Page 14-11
Use our recommended paper.
⇒ Page 1-7
Replace the process cartridge.
⇒ Page 2-28
When there is a space between drawings, the end of the roll
paper can be cut automatically before the next plotting.
⇒ “EDGE CUT TIMER” on page 6-4
Chapter 14 Troubleshooting
14-49