1 - Seiko I Infotech Inc.
1 - Seiko I Infotech Inc. 1 - Seiko I Infotech Inc.
Warning (Classification: W) Description : A warning state such as being low on consumables, or that a data error occurred. Cause : A consumable is almost used up, or any failure in the environment, settings, or data occurred. Measure : Take appropriate measures to remove the cause. *Log example in case of HPGL format error “W DATA 0201” 14-44
▼Error log Error Log Classification Table Message Classification Description Measure E xxxxxxxx (Error) O xxxxxxxx (Operator Call) W xxxxxxxx (Warning) Service call error Operator call Warning An unrecoverable error needs a service person's intervention. An error that the operator can fix. A consumable almost used up, or problems in the environment, settings, or data was detected. If the device does not recover from this error after turning the power off and on, please notify your dealer or our service center of the displayed error message and error condition. Remove the cause to restore the device to its noraml state. Take measures according to the guidance message displayed on the Control Panel. Remove the cause of each failure. Chapter 14 Troubleshooting 14-45
- Page 218 and 219: ●PORT Port is enabled and can be
- Page 220 and 221: About Terioplot The Terioplot softw
- Page 222 and 223: Settings In order to operate the pl
- Page 225 and 226: Chapter 14 Troubleshooting Chapter
- Page 227 and 228: When an error message appears When
- Page 229 and 230: ▼When an error message appears 3
- Page 231 and 232: ▼When an error message appears
- Page 233 and 234: ▼When an error message appears 3
- Page 235 and 236: ▼When an error message appears
- Page 237 and 238: ▼When an error message appears 5
- Page 239 and 240: ▼When an error message appears
- Page 241 and 242: ▼When an error message appears
- Page 243 and 244: ▼When an error message appears Op
- Page 245 and 246: ▼When an error message appears W
- Page 247 and 248: ▼When an error message appears
- Page 249 and 250: ▼When an error message appears (4
- Page 251 and 252: ▼When an error message appears (5
- Page 253 and 254: ▼When an error message appears (1
- Page 255 and 256: ▼When an error message appears (2
- Page 257 and 258: ▼When an error message appears
- Page 259 and 260: ▼When an error message appears
- Page 261 and 262: ▼When an error message appears (6
- Page 263 and 264: ▼When an error message appears (1
- Page 265 and 266: Error log ▼When an error message
- Page 267: ▼Error log Type of Error Log The
- Page 271 and 272: ▼Troubleshooting for ethernet Cau
- Page 273 and 274: When a print error occurs This sect
- Page 275 and 276: ▼ Basic Specifications Appendix A
- Page 277 and 278: ▼ Basic specifications (2/2) Item
- Page 279 and 280: ▼ Menu structure A Note ( 5 ) TIF
- Page 281 and 282: ▼ Menu structure C C' Note ( 7 )
- Page 283 and 284: ▼ Menu structure E E' #PEN PARAME
- Page 285 and 286: ▼ Menu structure [PAPER] MENU MEN
- Page 287 and 288: ○ ○ ○ ○ ▼ Menu structure
- Page 289 and 290: ▼ Menu structure [SYSTEM] MENU ME
- Page 291 and 292: ▼ Menu structure H SYSTEM #APPLY
- Page 293 and 294: ▼ Menu structure J #SCAN START >O
- Page 295 and 296: ▼ Menu structure L #CONNECTION TY
- Page 297 and 298: ▼ Command list HP-GL,HP-GL/2 Devi
- Page 299 and 300: ▼ Command list Advanced instructi
- Page 301 and 302: ▼ Command list Foreground Render
- Page 303 and 304: ▼ Command list (2/6) Classificati
- Page 305 and 306: ▼ Command list (4/6) Classificati
- Page 307 and 308: ▼ Command list (6/6) Classificati
- Page 309 and 310: ▼ Command list CALS Format Record
- Page 311: ▼ Command list lpd Support Comman
▼Error log<br />
Error Log Classification Table<br />
Message Classification Description Measure<br />
E xxxxxxxx<br />
(Error)<br />
O xxxxxxxx<br />
(Operator Call)<br />
W xxxxxxxx<br />
(Warning)<br />
Service call error<br />
Operator call<br />
Warning<br />
An unrecoverable error<br />
needs a service person's<br />
intervention.<br />
An error that the<br />
operator can fix.<br />
A consumable almost<br />
used up, or problems in<br />
the environment, settings,<br />
or data was detected.<br />
If the device does not<br />
recover from this error after<br />
turning the power off and<br />
on, please notify your dealer<br />
or our service center of the<br />
displayed error message and<br />
error condition.<br />
Remove the cause to<br />
restore the device to its<br />
noraml state.<br />
Take measures according to<br />
the guidance message<br />
displayed on the Control<br />
Panel.<br />
Remove the cause of each<br />
failure.<br />
Chapter 14 Troubleshooting<br />
14-45