1 - Seiko I Infotech Inc.
1 - Seiko I Infotech Inc. 1 - Seiko I Infotech Inc.
Error code Printed error memo Description Measure 0305 W SPOOL OVERFLOW The spool memory overflows. Install optional HDD, or specify the CENTERING = OFF if the device is used with the CENTERING = ON. 0306 W POLYGON OVERFLO W Correct erroneous part at the Polygon buffer overflow error computer side. (Polygon buffer occurred. upper limit: 106600 points) If the error is reproducible and the print result is poor, the software 0307 W PDL ERR 307 to must be upgraded to the latest to Program warning W PDL ERR 313 version.Pleasenotifyyourdealeror 0313 our service center of the displayed error message and error condition. 0314 W DATA IGNORED Check the computer side if Data is ignored, because there effective plotting data is is no effective plotting data. transferred. 0400 W RASTER_DECODE_ER R Check the computer side if the The format of the compressed format of the compressed raster data is erroneous. raster data is correct. 0401 W RASTER_FORMAT_ER R There is no raster data of the Check the computer side if size specified by the data. data is correct. If the error is reproducible and the print result is poor, the software 0500 must be upgraded to the latest to - (No error memo) Program warning version.Pleasenotifyyourdealeror 0505 our service center of the displayed error message and error condition. TIFF data is erroneous. Or, 0600 W FORMATERROR the plotting failed due to an omission of essential tag. Correct erroneous part at the The number of parameters of 0601 W # OF PARAM. ERROR computer side. TIFF data tag is wrong. 0602 W PARAM._RANGE_ER R The parameter value of TIFF data tag exceeds the supported range. 0603 - (No error memo) Data is ignored, because there is no effective plotting data in TIFF data. Check the computer side if effective plotting data is transferred. 0700 - (No error memo) The plotting failed due to an omission of essential record in the CALS format. Correct erroneous part at the computer side. 14-30
▼When an error message appears (2) Copy PDL warning (Operator intervention) If the following warning occurred, the error display and error log registration are taking place. By pressing any key, you can remove the warning and recover to normal condition. W COPY-0B30 Press Any Key Error code Description Measure 0B30 0B31 to 0B33 Long size error Scan parameter error For printing in long size, the setup is limited. Use default settings for the margin, frameless, move, mirror, and zoom modes, and scale x1 for the scale mode. * Re-scan the original. If the error recurs, please notify your dealer or our service center of the displayed error message and error condition. * If the error code 0B31 or 0B32 appears in the partial copy, see the separate volume "User's Guide, Copy Part." Chapter 14 Troubleshooting 14-31
- Page 204 and 205: LANGUAGE Switches the message displ
- Page 206 and 207: ◆ If the [Enter] key is pressed w
- Page 208 and 209: Setting items Ethernet parameter is
- Page 210 and 211: PORT SELECT Selects the Ethernet po
- Page 212 and 213: ROUTING TABLE Specifies the routing
- Page 214 and 215: ■METRIC Specifies the metric. 1
- Page 216 and 217: ■FTP DATA TYPE Specifies the init
- Page 218 and 219: ●PORT Port is enabled and can be
- Page 220 and 221: About Terioplot The Terioplot softw
- Page 222 and 223: Settings In order to operate the pl
- Page 225 and 226: Chapter 14 Troubleshooting Chapter
- Page 227 and 228: When an error message appears When
- Page 229 and 230: ▼When an error message appears 3
- Page 231 and 232: ▼When an error message appears
- Page 233 and 234: ▼When an error message appears 3
- Page 235 and 236: ▼When an error message appears
- Page 237 and 238: ▼When an error message appears 5
- Page 239 and 240: ▼When an error message appears
- Page 241 and 242: ▼When an error message appears
- Page 243 and 244: ▼When an error message appears Op
- Page 245 and 246: ▼When an error message appears W
- Page 247 and 248: ▼When an error message appears
- Page 249 and 250: ▼When an error message appears (4
- Page 251 and 252: ▼When an error message appears (5
- Page 253: ▼When an error message appears (1
- Page 257 and 258: ▼When an error message appears
- Page 259 and 260: ▼When an error message appears
- Page 261 and 262: ▼When an error message appears (6
- Page 263 and 264: ▼When an error message appears (1
- Page 265 and 266: Error log ▼When an error message
- Page 267 and 268: ▼Error log Type of Error Log The
- Page 269 and 270: ▼Error log Error Log Classificati
- Page 271 and 272: ▼Troubleshooting for ethernet Cau
- Page 273 and 274: When a print error occurs This sect
- Page 275 and 276: ▼ Basic Specifications Appendix A
- Page 277 and 278: ▼ Basic specifications (2/2) Item
- Page 279 and 280: ▼ Menu structure A Note ( 5 ) TIF
- Page 281 and 282: ▼ Menu structure C C' Note ( 7 )
- Page 283 and 284: ▼ Menu structure E E' #PEN PARAME
- Page 285 and 286: ▼ Menu structure [PAPER] MENU MEN
- Page 287 and 288: ○ ○ ○ ○ ▼ Menu structure
- Page 289 and 290: ▼ Menu structure [SYSTEM] MENU ME
- Page 291 and 292: ▼ Menu structure H SYSTEM #APPLY
- Page 293 and 294: ▼ Menu structure J #SCAN START >O
- Page 295 and 296: ▼ Menu structure L #CONNECTION TY
- Page 297 and 298: ▼ Command list HP-GL,HP-GL/2 Devi
- Page 299 and 300: ▼ Command list Advanced instructi
- Page 301 and 302: ▼ Command list Foreground Render
- Page 303 and 304: ▼ Command list (2/6) Classificati
Error<br />
code<br />
Printed error<br />
memo<br />
Description<br />
Measure<br />
0305<br />
W SPOOL OVERFLOW<br />
The spool memory overflows.<br />
Install optional HDD, or<br />
specify the CENTERING =<br />
OFF if the device is used with<br />
the CENTERING = ON.<br />
0306<br />
W POLYGON OVERFLO W<br />
Correct erroneous part at the<br />
Polygon buffer overflow error<br />
computer side. (Polygon buffer<br />
occurred.<br />
upper limit: 106600 points)<br />
If the error is reproducible and the<br />
print result is poor, the software<br />
0307<br />
W PDL ERR 307 to<br />
must be upgraded to the latest<br />
to<br />
Program warning<br />
W PDL ERR 313<br />
version.Pleasenotifyyourdealeror<br />
0313<br />
our service center of the displayed<br />
error message and error condition.<br />
0314<br />
W DATA IGNORED<br />
Check the computer side if<br />
Data is ignored, because there<br />
effective plotting data is<br />
is no effective plotting data.<br />
transferred.<br />
0400<br />
W RASTER_DECODE_ER R<br />
Check the computer side if the<br />
The format of the compressed<br />
format of the compressed<br />
raster data is erroneous.<br />
raster data is correct.<br />
0401<br />
W RASTER_FORMAT_ER R<br />
There is no raster data of the Check the computer side if<br />
size specified by the data. data is correct.<br />
If the error is reproducible and the<br />
print result is poor, the software<br />
0500<br />
must be upgraded to the latest<br />
to - (No error memo) Program warning<br />
version.Pleasenotifyyourdealeror<br />
0505<br />
our service center of the displayed<br />
error message and error condition.<br />
TIFF data is erroneous. Or,<br />
0600<br />
W FORMATERROR<br />
the plotting failed due to an<br />
omission of essential tag.<br />
Correct erroneous part at the<br />
The number of parameters of<br />
0601<br />
W # OF PARAM. ERROR<br />
computer side.<br />
TIFF data tag is wrong.<br />
0602<br />
W PARAM._RANGE_ER R<br />
The parameter value of TIFF data<br />
tag exceeds the supported range.<br />
0603<br />
- (No error memo)<br />
Data is ignored, because there<br />
is no effective plotting data in<br />
TIFF data.<br />
Check the computer side if<br />
effective plotting data is<br />
transferred.<br />
0700<br />
- (No error memo)<br />
The plotting failed due to an<br />
omission of essential record in<br />
the CALS format.<br />
Correct erroneous part at the<br />
computer side.<br />
14-30