1 - Seiko I Infotech Inc.

▼When an error message appears
W NVRAM ERROR
Description : The nonvolatile memory (NVRAM) of the device has
been damaged. Usual printing can be performed, but
some functions that use this area may not operate
correctly.
Measure : If the device does not recover from this error by turning
the power off and on, please notify your dealer or our
service center of the displayed error message and error
condition.
Delete Job
Y=En t e r
N=Cance l
Description : This message appears if there is an unprocessed job (jobs
standing by for processing) at powering on.
Measure : Select whether the job is deleted or not by pressing the
[Enter] key or [Cancel] key.
The operation goes in to time-out in about 10 seconds
unless the key is pressed, and the device starts with the
job saved.
Chapter 14 Troubleshooting
If a job has been left at powering on
Job status Display Transaction
Standing for
processing
DELETE JOB Job is deleted by designation.
Processing -
Processed -
Job is automatically moved to
"already processed" job.
Jobs are automatically deleted in
order from the oldest job.
14-21