1 - Seiko I Infotech Inc.

▼Setting parameter items
PARAMETER MODE (DSCAN only)
Allows for determining which setting is enabled for parameters which
can be set both with data or on the panel.
This setting is performed on the second hierarchy.
Note
◆ The DSCAN format is for only customers in Japan.
: Default value
DATA FIRST Enables the setting with data.
PANEL FIRST Enables the setting on the panel.
MEDIA SERIES (HP-GL, TIFF, CALS only)
When the paper feed mode is set to CONT MODE, OPTIMAL MODE,
or MANUAL FEED mode, set the series of paper to be fed. This setting
is performed on the second hierarchy.
Chapter 5 "SETUP" Menu
: Default value
A SERIES Allows for A series automatic feeding.
9” SERIES Allows for 9×12 inch series automatic feeding.
8.5” SERIES Allows for 8.5×11 inch series automatic feeding.
30×42 SERIES Allows for 30×42 inch series automatic feeding.
MAP SERIES Allows for MAP series automatic feeding.
DIN SERIES Allows for DIN series automatic feeding.
CHINA SERIES Allows for China series automatic feeding.
Note
◆ Default values are changed in the item INITIAL SET item.
5-11