1 - Seiko I Infotech Inc.
1 - Seiko I Infotech Inc. 1 - Seiko I Infotech Inc.
PDL menu The various print parameters can be set in the PDL table from the Panel setup menu. The PDL processing program performs print processing in accordance with the print parameter settings. Setting each print parameter allows for convenient operation by allowing you to change how paper is fed and delivered, and enables you to reduce the scale of a drawing. When using our company’s printer driver When using our company’s printer driver (when the print driver “OPTION SHEET” from “OUTPUT PROCESS SELECT” in “FORMAT” has been set to C2VR), the printer parameters set for this device are disabled and printing is performed in accordance with the print parameters set for the print driver (printing in accord with the print driver settings). If you wish to enable the PDL menu print parameters using our company’s print driver, go to Format parameters and set the “PRT DRIVER” to “DISABLE” (initial parameter is print driver: enabled). “PRT DRIVER” ENABLE / DISABLE / CHINA However, as all print parameters set for the printer driver are disabled by this action, set the each print parameter as required on the device. To operate the device with China series paper using the print driver, set the “PRT DRIVER = CHINA.” In this case, operation will be performed as base table plotting. 3-8
Items which you can set Set the device offline before performing setting operations. When you press [MENU] Key to set the device offline, the following message appears on the display. Changed parameters are saved in non-volatile memory and are not lost when the power is turned off. Although the offline display appears even while printing, there are functions which cannot be operated and these menus will not be displayed. Idle status Menu Mod e MENU #SETUP Menu Mod e MENU #DEV I CE Chapter 3 Menu overview Menu Mod e MENU #PAPER [ ] key Menu Mod e MENU #FUNCTION [ ] key Menu Mod e MENU #PROTOCOL Menu Mod e MENU #RESET Menu Mod e MENU #SYSTEM 3-9
- Page 52 and 53: ■Turning on the power Initial izi
- Page 54 and 55: Online and offline The device is
- Page 56 and 57: If an error message about paper sup
- Page 58 and 59: How to detach the paper rolls 1 Pul
- Page 60 and 61: E How to attach the paper roll ◆
- Page 62 and 63: 6 Close the paper roll drawer. Gent
- Page 64 and 65: Precautions on handling Warning Do
- Page 66 and 67: 3 Close the scanner cover. Stopper
- Page 68 and 69: 8 Pull the lever to the right end.
- Page 70 and 71: Replacing the waste toner bottle Wh
- Page 72 and 73: 3 Remove the waste toner bottle fro
- Page 74 and 75: Replacing the process cartridge Whe
- Page 76 and 77: 2 Take out the Process cartridge. P
- Page 78 and 79: 6 Insert the Process cartridge. To
- Page 80 and 81: Manual paper feeding (cut paper) Th
- Page 82 and 83: 9× 12 series fixed form cut paper
- Page 84 and 85: When feeding the cut paper into the
- Page 86 and 87: Cancel printing Press the [STOP] ke
- Page 88 and 89: Web function startup method 1 The f
- Page 90 and 91: Using paper of new standard series
- Page 92 and 93: Using paper of Chinese standard ser
- Page 94 and 95: Limiting rolls to be used When limi
- Page 96 and 97: Channels and ports This device is e
- Page 98 and 99: Jobs The device manages the receive
- Page 100 and 101: (1) Setup menu Change the settings
- Page 104 and 105: Printing status Me nu Mo de MENU #S
- Page 106 and 107: Device menu “DEVICE” From the d
- Page 108 and 109: Function menu “FUNCTION” Press
- Page 110 and 111: Reset menu “RESET” Press the [
- Page 113 and 114: Chapter 4 Basic Menu Operation Chap
- Page 115 and 116: Offline menu operation Press the [M
- Page 117 and 118: ▼Offline menu operation Setting o
- Page 119 and 120: ▼Offline menu operation ■Numeri
- Page 121 and 122: ▼Offline menu operation ■Execut
- Page 123: ▼Offline menu operation Exiting t
- Page 126 and 127: Setting parameter items The followi
- Page 128 and 129: (A) Second hierarchy item ✽ Third
- Page 130 and 131: 5-6 (D-1) item ourth hierarchy F r
- Page 132 and 133: (E) Third hierarchy item Parameter
- Page 134 and 135: (G) Third hierarchy item Parameter
- Page 136 and 137: AUTO SUPPLY Allows for setting the
- Page 138 and 139: : Default value FIX SIZE Produces f
- Page 140 and 141: ■SIZE MARGIN (mm) / SIZE MARGIN (
- Page 142 and 143: ■MARGIN (mm) / MARGIN (in) Allows
- Page 144 and 145: ■REVERSE (TIFF, CALS only) Allows
- Page 146 and 147: ■SCALE X (%) SCALE Y (%) When set
- Page 148 and 149: FORMAT PARAM. (HP-GL DSCAN only) Th
- Page 150 and 151: ■PLAN SIZE (HP-GL only) Sets whic
PDL menu<br />
The various print parameters can be set in the PDL table from the Panel<br />
setup menu. The PDL processing program performs print processing in<br />
accordance with the print parameter settings.<br />
Setting each print parameter allows for convenient operation by allowing<br />
you to change how paper is fed and delivered, and enables you to reduce<br />
the scale of a drawing.<br />
When using our company’s printer driver<br />
When using our company’s printer driver (when the print driver<br />
“OPTION SHEET” from “OUTPUT PROCESS SELECT” in<br />
“FORMAT” has been set to C2VR), the printer parameters set for this<br />
device are disabled and printing is performed in accordance with the print<br />
parameters set for the print driver (printing in accord with the print driver<br />
settings).<br />
If you wish to enable the PDL menu print parameters using our<br />
company’s print driver, go to Format parameters and set the “PRT<br />
DRIVER” to “DISABLE” (initial parameter is print driver: enabled).<br />
“PRT DRIVER” ENABLE / DISABLE / CHINA<br />
However, as all print parameters set for the printer driver are disabled by<br />
this action, set the each print parameter as required on the device.<br />
To operate the device with China series paper using the print driver, set<br />
the “PRT DRIVER = CHINA.” In this case, operation will be performed<br />
as base table plotting.<br />
3-8